Skip to content
worldfires
TH · Thailand · –

Mueang Tak fire, 3 March 2017 เมืองตาก · Mueang Tak

Out · last detection 6 Mar 2017, 18:17 UTC

The fire started on 3 March 2017 in Mueang Tak, Thailand, and satellites saw it burning for 5 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,332 hectares from heat detections, spread across a single municipality.

It is the 175th largest in Tak Province since 2016 (of 266 with a page). Number 96 in Thailand in 2017, of 155.

The power measured by the satellite is low (13.4 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
1,332ha
GWIS perimeter (Copernicus)
Duration
5days
3 Mar 2017 – 7 Mar 2017
Municipalities hit
1
districts
Started on
3 Mar
2017
Heat detections
44
in a single hotspot: 13 MW
Danger at start
24
High · FWI index
Average daily power
48MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 3 Mar7 Mar
6 Mar 2017

How it evolved, day by day

3 Mar 2017 · 35 MW · 15 4 Mar 2017 · 80 MW · 15 5 Mar 2017 · 34 MW · 7 6 Mar 2017 · 41 MW · 7
3 Mar 4 Mar 5 Mar 6 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
28km/h · peak gust
30%lowest humidity

It had gone 43 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.8% of the area of London (13 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Mueang Tak เมืองตาก where it started
    1,339 ha reached on 3 Mar
    0.7 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area0.21 ha
Residents< 20

Inside the perimeter there were about 0.21 hectares of built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
3 Mar 35.7 °C 33 % 20 km/h 0.0 mm High 24
4 Mar 35.3 °C 37 % 28 km/h 0.0 mm High 29
5 Mar 35.9 °C 35 % 28 km/h 0.0 mm High 28
6 Mar 36.6 °C 31 % 22 km/h 0.0 mm High 29
7 Mar 36.5 °C 30 % 26 km/h 0.0 mm High 31
8 Mar after 37.0 °C 30 % 20 km/h 0.0 mm High 30
9 Mar after 35.7 °C 34 % 30 km/h 0.0 mm High 35
10 Mar after 35.9 °C 37 % 37 km/h 0.0 mm High 36
11 Mar after 37.4 °C 33 % 33 km/h 0.0 mm High 30
12 Mar after 36.1 °C 35 % 50 km/h 0.0 mm Very high 41
13 Mar after 37.1 °C 26 % 48 km/h 0.0 mm Very high 47
14 Mar after 38.0 °C 28 % 31 km/h 0.0 mm High 36
15 Mar after 38.5 °C 23 % 20 km/h 0.0 mm High 36
16 Mar after 38.4 °C 25 % 27 km/h 0.0 mm Very high 39
17 Mar after 36.5 °C 30 % 20 km/h 0.0 mm High 37

Its twins: fires that started in the same weather

It started with an FWI of 23.5, a minimum humidity of 33% and 43 days without rain. Fires in the area that started in weather like this since 2016: 18.

FWI at the start 23.5
Minimum humidity 33 %
Days without rain 43
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Ban Tak fire, January 2025
1,325 ha 7 days FWI 24.5 Min. humidity 31 % 25 km away, in 2025

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

10 days
median duration
1,724 ha
median area
100 %
went past 1,000 ha
5.8 mm
rain at the end (median; 7 of 18 had it)

It burned an area similar to its twins (1,332 ha against a median of 1,724 ha) and lasted 5 days, against 10 days.

In 11 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
28km/h · max. gust

It was considered over on 7 Mar, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 7 of 18, with a median of 5.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 24 Feb 2017
After · 14 Mar 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 44Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Thailand

Frequently asked questions

How long did the Mueang Tak fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 3 March 2017 to 7 March 2017 (5 days). The perimeter dates it from 3 March 2017 to 6 March 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,332 hectares (13.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Mueang Tak (1,339 ha, 0.7 %).
What was the weather like?
During the fire the temperature reached 36.6 °C, humidity dropped to 30 % and gusts hit 28 km/h. The fire danger index (FWI) reached 31, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Thailand (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 18. Their median duration was 10 days and their median area 1,724 ha; 100 % went past 1,000 ha. In 11 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 199 · 191 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 6 March 2017 → 7 March 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 199 · 191.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 3 March 2017 to 6 March 2017. 44 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.