Mount Isa fire, 2 November 2024 Mount Isa
The fire started on 2 November 2024 in Mount Isa, Australia, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 12,724 hectares from heat detections, spread across a single municipality.
It is the 569th largest in Queensland since 2016 (of 1737 with a page). Number 185 in Australia in 2024, of 638.
Compare with…
- Burnt area
- 12,724ha
- GWIS perimeter (Copernicus)
- Duration
- 10days
- 2 Nov 2024 – 11 Nov 2024
- Municipalities hit
- 1
- local government areas
- Started on
- 2 Nov
- 2024
- Heat detections
- 301
- in a single hotspot: 141 MW
- Danger at start
- 72
- Very extreme · FWI index
- Average daily power
- 528MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 19 days without rain (1 mm or more) when it started. Rain came after the fire: 10.4 mm on 16 Nov.
This area had burned before
9% of the perimeter overlaps earlier fires recorded since 2016: 1,150 ha in 2023.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Mount Isa where it started12,783 ha reached on 2 Nov0.3 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 26 Oct | 38.0 °C | 10 % | 44 km/h | 0.0 mm | Very extreme 72 |
| 27 Oct | 36.7 °C | 28 % | 36 km/h | 0.0 mm | Very high 45 |
| 28 Oct | 38.7 °C | 12 % | 46 km/h | 0.0 mm | Extreme 64 |
| 29 Oct | 39.1 °C | 15 % | 58 km/h | 0.0 mm | Extreme 69 |
| 30 Oct | 37.2 °C | 23 % | 31 km/h | 1.3 mm | Very high 42 |
| 31 Oct | 36.8 °C | 24 % | 46 km/h | 10.3 mm | High 24 |
| 1 Nov | 34.8 °C | 20 % | 34 km/h | 0.3 mm | High 35 |
| 2 Nov | 38.9 °C | 9 % | 28 km/h | 0.0 mm | Very high 46 |
| 3 Nov | 38.9 °C | 14 % | 37 km/h | 0.0 mm | Extreme 55 |
| 4 Nov | 38.8 °C | 18 % | 40 km/h | 0.0 mm | Extreme 54 |
| 5 Nov | 40.4 °C | 15 % | 30 km/h | 0.0 mm | Very high 50 |
| 6 Nov | 39.7 °C | 18 % | 29 km/h | 0.0 mm | Very high 48 |
| 7 Nov | 39.1 °C | 20 % | 26 km/h | 0.0 mm | Extreme 50 |
| 8 Nov | 39.9 °C | 20 % | 38 km/h | 0.0 mm | Extreme 55 |
| 9 Nov | 41.8 °C | 17 % | 42 km/h | 0.0 mm | Extreme 57 |
| 10 Nov | 39.5 °C | 23 % | 32 km/h | 1.1 mm | High 35 |
| 11 Nov | 38.8 °C | 19 % | 32 km/h | 0.1 mm | Very high 46 |
| 12 Nov after | 39.7 °C | 23 % | 35 km/h | 0.1 mm | Very high 43 |
| 13 Nov after | 39.6 °C | 20 % | 38 km/h | 0.2 mm | Very high 41 |
| 14 Nov after | 40.0 °C | 15 % | 42 km/h | 0.0 mm | Extreme 56 |
| 15 Nov after | 39.3 °C | 11 % | 40 km/h | 0.0 mm | Extreme 61 |
| 16 Nov after | 36.3 °C | 35 % | 39 km/h | 10.4 mm | Moderate 13 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 8 November 2024 the air beside the fire reached 53 µg/m³ of PM2.5. That day averaged 25: 1.7 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 301Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Mount Isa fire last?
- GWIS (Copernicus) dates it between 2 November 2024 and 11 November 2024: 10 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 12,724 hectares (127.2 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Mount Isa (12,783 ha, 0.3 %).
- What was the weather like?
- During the fire the temperature reached 41.8 °C, humidity dropped to 9 % and gusts hit 58 km/h. The fire danger index (FWI) reached 72, class Very extreme.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 000
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 301 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.