Skip to content
worldfires
CO · Colombia · –

Morales fire, February 2016 Morales, Simití

Out · last detection 24 Feb 2016, 18:25 UTC

The fire started on 13 February 2016 in Morales, Colombia, and satellites saw it burning for 16 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,426 hectares from heat detections, spread across 2 municipalities.

It is the 10th largest in Bolívar since 2016 (of 19 with a page). Number 74 in Colombia in 2016, of 160.

The power measured by the satellite is low (23.0 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
2,426ha
GWIS perimeter (Copernicus)
Duration
16days
13 Feb 2016 – 28 Feb 2016
Municipalities hit
2
municipalities
Started on
13 Feb
2016
Heat detections
76
in a single hotspot: 23 MW
Danger at start
30
High · FWI index
Average daily power
29MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 13 Feb28 Feb
24 Feb 2016

How it evolved, day by day

13 Feb 2016 · 56 MW · 8 14 Feb 2016 · 11 MW · 3 15 Feb 2016 · 27 MW · 9 16 Feb 2016 · 15 MW · 8 17 Feb 2016 · 2 MW · 3 18 Feb 2016 · 27 MW · 6 19 Feb 2016 · 10 MW · 2 20 Feb 2016 · 86 MW · 16 21 Feb 2016 · 37 MW · 15 24 Feb 2016 · 20 MW · 6
13 Feb 15 Feb 17 Feb 20 Feb

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
35km/h · peak gust
28%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 1.6 mm on 29 Feb.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.5% of the area of London (24 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Morales where it started
    2,305 ha reached on 13 Feb
    1.7 %
  2. 136 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
13 Feb 37.9 °C 32 % 27 km/h 0.4 mm High 30
14 Feb 37.2 °C 36 % 28 km/h 0.1 mm High 33
15 Feb 38.9 °C 33 % 30 km/h 0.3 mm High 35
16 Feb 38.7 °C 34 % 27 km/h 1.2 mm High 34
17 Feb 36.0 °C 41 % 23 km/h 0.0 mm Moderate 16
18 Feb 38.3 °C 37 % 26 km/h 0.1 mm High 25
19 Feb 38.6 °C 28 % 35 km/h 0.0 mm High 29
20 Feb 38.2 °C 34 % 33 km/h 1.6 mm High 34
21 Feb 36.1 °C 36 % 28 km/h 0.7 mm High 22
22 Feb 37.9 °C 36 % 27 km/h 1.6 mm High 27
23 Feb 38.6 °C 33 % 26 km/h 0.5 mm High 23
24 Feb 38.6 °C 39 % 29 km/h 0.7 mm High 30
25 Feb 36.7 °C 40 % 31 km/h 0.2 mm High 24
26 Feb 36.1 °C 37 % 26 km/h 1.0 mm High 23
27 Feb 37.7 °C 33 % 34 km/h 0.0 mm High 30
28 Feb 36.8 °C 38 % 28 km/h 0.2 mm High 28
29 Feb after 36.9 °C 39 % 28 km/h 1.6 mm High 32

Its twins: fires that started in the same weather

It started with an FWI of 30.2, a minimum humidity of 32% and 1 day without rain. Fires in the area that started in weather like this since 2016: 17.

FWI at the start 30.2
Minimum humidity 32 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

La Gloria fire, March 2016
4,426 ha 12 days FWI 26.9 Min. humidity 31 % 78 km away, in 2016

First rain (1 mm or more) after it ended: 21.6 mm on 1 Apr.

What happened to them

6 days
median duration
2,463 ha
median area
100 %
went past 1,000 ha
4.1 mm
rain at the end (median; 15 of 17 had it)

It burned an area similar to its twins (2,426 ha against a median of 2,463 ha) and lasted 16 days, against 6 days.

In 2 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.6 mmfirst rain
29 Febthe day after it ended
35km/h · max. gust

It was considered over on 28 Feb, and on 29 Feb 1.6 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 15 of 17, with a median of 4.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 6 Feb 2016
After · 6 Mar 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 76Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Colombia

Frequently asked questions

How long did the Morales fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 13 February 2016 to 28 February 2016 (16 days). The perimeter dates it from 13 February 2016 to 21 February 2016.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,426 hectares (24.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Morales (2,305 ha, 1.7 %); Simití (136 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 38.9 °C, humidity dropped to 28 % and gusts hit 35 km/h. The fire danger index (FWI) reached 35, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Colombia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 17. Their median duration was 6 days and their median area 2,463 ha; 100 % went past 1,000 ha. In 2 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 123 · 119 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 123 · 119.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 13 February 2016 to 21 February 2016. 76 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.