Skip to content
worldfires
RU · Russia · –

Mogochinsky District fire, 22 July 2024 Mogochinsky District, Tungiro-Olyokminsky District

Out · last detection 3 Aug 2024, 03:19 UTC

The fire started on 22 July 2024 in Mogochinsky District, Russia, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,974 hectares from heat detections, spread across 2 municipalities.

It is the 219th largest in Zabaykalsky Krai since 2016 (of 465 with a page). Number 284 in Russia in 2024, of 557.

Burnt area
5,974ha
GWIS perimeter (Copernicus)
Duration
13days
22 Jul 2024 – 3 Aug 2024
Municipalities hit
2
districts
Started on
22 Jul
2024
Heat detections
705
in a single hotspot: 178 MW
Danger at start
8
Low · FWI index
Average daily power
518MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 22 Jul3 Aug
3 Aug 2024

How it evolved, day by day

22 Jul 2024 · 7 MW · 1 23 Jul 2024 · 13 MW · 4 24 Jul 2024 · 69 MW · 35 25 Jul 2024 · 709 MW · 133 26 Jul 2024 · 2,762 MW · 230 27 Jul 2024 · 1,597 MW · 167 28 Jul 2024 · 406 MW · 113 29 Jul 2024 · 86 MW · 15 1 Aug 2024 · 4 MW · 1 2 Aug 2024 · 20 MW · 3 3 Aug 2024 · 22 MW · 3
22 Jul 26 Jul 2 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

31°high
43km/h · peak gust
28%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started. Rain came after the fire: 7.4 mm on 4 Aug.

This area had burned before

6% of the perimeter overlaps earlier fires recorded since 2016: 383 ha in 2018.

How big is it?

10 km
It burned the equivalent of 3.8% of the area of London (60 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Mogochinsky District where it started
    5,828 ha reached on 22 Jul
    0.2 %
  2. 178 ha reached on 27 Jul
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
22 Jul 29.1 °C 30 % 19 km/h 0.0 mm Low 8
23 Jul 29.3 °C 38 % 25 km/h 0.0 mm Low 10
24 Jul 29.5 °C 38 % 22 km/h 0.0 mm Low 11
25 Jul 29.4 °C 36 % 32 km/h 0.0 mm Moderate 13
26 Jul 28.5 °C 39 % 31 km/h 0.0 mm Moderate 14
27 Jul 28.3 °C 39 % 24 km/h 0.2 mm Moderate 13
28 Jul 31.1 °C 28 % 16 km/h 0.0 mm Moderate 15
29 Jul 30.4 °C 31 % 27 km/h 0.1 mm Moderate 19
30 Jul 24.1 °C 63 % 28 km/h 12.2 mm Very low 0
31 Jul 20.2 °C 51 % 43 km/h 2.3 mm Very low 2
1 Aug 21.7 °C 44 % 20 km/h 0.0 mm Very low 3
2 Aug 22.7 °C 36 % 29 km/h 0.0 mm Low 8
3 Aug 24.3 °C 35 % 28 km/h 0.8 mm Low 9
4 Aug after 16.6 °C 77 % 34 km/h 7.4 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 7.8, a minimum humidity of 30% and 2 days without rain. Fires in the area that started in weather like this since 2017: 18.

FWI at the start 7.8
Minimum humidity 30 %
Days without rain 2
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Tyndinsky District fire, June 2019
11,958 ha 23 days FWI 7.2 Min. humidity 30 % 226 km away, in 2019

First rain (1 mm or more) after it ended: 7.0 mm on 9 Jul.

What happened to them

14 days
median duration
6,758 ha
median area
33 %
went past 10,000 ha
6.1 mm
rain at the end (median; 17 of 18 had it)

It burned an area similar to its twins (5,974 ha against a median of 6,758 ha) and lasted 13 days, against 14 days.

In 1 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

7.4 mmfirst rain
4 Augthe day after it ended
43km/h · max. gust

It was considered over on 3 Aug, and on 4 Aug 7.4 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 17 of 18, with a median of 6.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2017.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 15 Jul 2024
After · 10 Aug 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 29 July 2024 the air beside the fire reached 518 µg/m³ of PM2.5. That day averaged 400: 27 times the WHO daily guideline (15).

PM2.5 peak518 µg/m³
Days over the guideline9 days
PM10740 µg/m³
Optical depth6.55
21 Jul24 Jul27 Jul30 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 705Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Mogochinsky District fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 22 July 2024 to 3 August 2024 (13 days). The perimeter dates it from 23 July 2024 to 29 July 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,974 hectares (59.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Mogochinsky District (5,828 ha, 0.2 %); Tungiro-Olyokminsky District (178 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 31.1 °C, humidity dropped to 28 % and gusts hit 43 km/h. The fire danger index (FWI) reached 19, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2017 with a similar FWI, humidity and dry spell: 18. Their median duration was 14 days and their median area 6,758 ha; 33 % went past 10,000 ha. In 1 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 29 July 2024 → 3 August 2024.
  2. Start date: 23 July 2024 → 22 July 2024.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 23 July 2024 to 29 July 2024. 705 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.