Skip to content
worldfires
ZA · South Africa · –

Mogalakwena fire, November 2017 Mogalakwena

Out · last detection 20 Nov 2017, 11:23 UTC

The fire started on 15 November 2017 in Mogalakwena, South Africa, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,962 hectares from heat detections, spread across a single municipality.

It is the 89th largest in Limpopo since 2016 (of 161 with a page). Number 82 in South Africa in 2017, of 128.

The power measured by the satellite is low (29.5 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
2,962ha
GWIS perimeter (Copernicus)
Duration
6days
15 Nov 2017 – 20 Nov 2017
Municipalities hit
1
municipalities
Started on
15 Nov
2017
Heat detections
95
in a single hotspot: 29 MW
Danger at start
35
High · FWI index
Average daily power
92MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Nov20 Nov
20 Nov 2017

How it evolved, day by day

15 Nov 2017 · 1 MW · 1 16 Nov 2017 · 81 MW · 15 17 Nov 2017 · 307 MW · 39 18 Nov 2017 · 129 MW · 30 19 Nov 2017 · 33 MW · 9 20 Nov 2017 · 4 MW · 1
15 Nov 17 Nov 19 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
62km/h · peak gust
17%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 1.7 mm on 24 Nov.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.9% of the area of London (30 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Mogalakwena where it started
    2,979 ha reached on 15 Nov
    0.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area0.15 ha
Residents< 20

Inside the perimeter there were about 0.15 hectares of built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 30 % of the area in South Africa

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Nov 31.4 °C 39 % 62 km/h 8.5 mm High 35
16 Nov 23.6 °C 20 % 36 km/h 0.0 mm Low 5
17 Nov 24.5 °C 26 % 32 km/h 0.0 mm Moderate 21
18 Nov 28.2 °C 19 % 35 km/h 0.0 mm High 28
19 Nov 30.6 °C 20 % 37 km/h 0.0 mm High 38
20 Nov 31.9 °C 17 % 38 km/h 0.0 mm High 37
21 Nov after 34.6 °C 16 % 33 km/h 0.0 mm Very high 43
22 Nov after 33.1 °C 16 % 35 km/h 0.0 mm Very high 38
23 Nov after 28.4 °C 37 % 46 km/h 0.0 mm Very high 47
24 Nov after 29.0 °C 32 % 36 km/h 1.7 mm High 33

Its twins: fires that started in the same weather

It started with an FWI of 35.1, a minimum humidity of 39% and 3 days without rain. Fires in the area that started in weather like this since 2016: 7.

FWI at the start 35.1
Minimum humidity 39 %
Days without rain 3
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Thaba Chweu fire, September 2019
2,656 ha 4 days FWI 30.7 Min. humidity 37 % 236 km away, in 2019

First rain (1 mm or more) after it ended: 5.5 mm on 6 Sept.

What happened to them

Fires in the area that started in similar weather: 7. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.7 mmfirst rain
24 Nov4 days after it ended
62km/h · max. gust

It was considered over on 20 Nov, and on 24 Nov 1.7 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Nov 2017
After · 27 Nov 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 95Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in South Africa

Frequently asked questions

How long did the Mogalakwena fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 15 November 2017 to 20 November 2017 (6 days). The perimeter dates it from 15 November 2017 to 19 November 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,962 hectares (29.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Mogalakwena (2,979 ha, 0.5 %).
What was the weather like?
During the fire the temperature reached 31.9 °C, humidity dropped to 17 % and gusts hit 62 km/h. The fire danger index (FWI) reached 38, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of South Africa (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 10177 · 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 19 November 2017 → 20 November 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 10177 · 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 15 November 2017 to 19 November 2017. 95 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.