Skip to content
worldfires
ZM · Zambia · →

Milengi fire, 7 August 2025 Mansa, Milengi

Out · last detection 16 Sept 2025, 12:00 UTC

The fire started on 7 August 2025 in Milengi, Zambia, and satellites saw it burning for 40 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 23,838 hectares from heat detections, spread across 2 municipalities.

It is the 62th largest in Luapula since 2016 (of 534 with a page). Number 16 in Zambia in 2025, of 271.

Compare with…
Burnt area
23,838ha
GWIS perimeter (Copernicus)
Duration
40days
7 Aug 2025 – 15 Sept 2025
Municipalities hit
2
districts
Started on
7 Aug
2025
Heat detections
667
in a single hotspot: 132 MW
Danger at start
27
High · FWI index
Average daily power
177MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 7 Aug15 Sept
16 Sept 2025

How it evolved, day by day

7 Aug 2025 · 8 MW · 1 8 Aug 2025 · 1 MW · 1 9 Aug 2025 · 45 MW · 10 10 Aug 2025 · 270 MW · 17 11 Aug 2025 · 125 MW · 16 12 Aug 2025 · 149 MW · 23 13 Aug 2025 · 7 MW · 1 14 Aug 2025 · 9 MW · 1 15 Aug 2025 · 106 MW · 16 16 Aug 2025 · 979 MW · 76 17 Aug 2025 · 961 MW · 39 18 Aug 2025 · 376 MW · 54 19 Aug 2025 · 193 MW · 23 20 Aug 2025 · 165 MW · 19 21 Aug 2025 · 66 MW · 11 22 Aug 2025 · 55 MW · 7 23 Aug 2025 · 62 MW · 4 24 Aug 2025 · 37 MW · 3 26 Aug 2025 · 56 MW · 8 27 Aug 2025 · 105 MW · 12 28 Aug 2025 · 228 MW · 24 29 Aug 2025 · 171 MW · 19 30 Aug 2025 · 430 MW · 50 31 Aug 2025 · 34 MW · 5 1 Sept 2025 · 649 MW · 58 2 Sept 2025 · 349 MW · 34 3 Sept 2025 · 252 MW · 30 4 Sept 2025 · 266 MW · 24 5 Sept 2025 · 476 MW · 43 6 Sept 2025 · 8 MW · 1 7 Sept 2025 · 9 MW · 3 8 Sept 2025 · 124 MW · 8 9 Sept 2025 · 26 MW · 2 10 Sept 2025 · 2 MW · 1 11 Sept 2025 · 14 MW · 3 13 Sept 2025 · 9 MW · 4 14 Sept 2025 · 12 MW · 4 15 Sept 2025 · 53 MW · 6 16 Sept 2025 · 25 MW · 6
7 Aug 13 Aug 16 Aug 19 Aug 26 Aug 1 Sept 7 Sept 14 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
49km/h · peak gust
17%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

99% of the perimeter overlaps earlier fires recorded since 2016: 12,634 ha in 2016, 11,748 ha in 2017, 9,740 ha in 2018, 9,990 ha in 2019, 13,121 ha in 2020, 14,966 ha in 2021, 8,122 ha in 2022, 3,957 ha in 2023, 5,881 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 23,545 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 15% of the area of London (238 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 23,712 ha reached on 9 Aug
    3.1 %
  2. Milengi where it started
    298 ha reached on 7 Aug
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area29 ha
Residents≈ 4,600

Inside the perimeter there were about 29 hectares of built-up land and about 4,600 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
7 Aug 26.7 °C 30 % 25 km/h 0.0 mm High 27
8 Aug 27.4 °C 25 % 31 km/h 0.0 mm High 29
9 Aug 26.8 °C 28 % 35 km/h 0.0 mm High 31
10 Aug 27.3 °C 22 % 28 km/h 0.0 mm High 30
11 Aug 27.4 °C 22 % 32 km/h 0.0 mm High 33
12 Aug 26.0 °C 27 % 40 km/h 0.0 mm High 36
13 Aug 25.2 °C 30 % 31 km/h 0.0 mm High 31
14 Aug 25.6 °C 32 % 30 km/h 0.0 mm High 31
15 Aug 26.9 °C 32 % 30 km/h 0.0 mm High 30
16 Aug 27.7 °C 26 % 29 km/h 0.0 mm High 30
17 Aug 28.0 °C 25 % 32 km/h 0.0 mm High 32
18 Aug 26.3 °C 22 % 33 km/h 0.0 mm High 33
19 Aug 25.9 °C 27 % 33 km/h 0.0 mm High 33
20 Aug 26.6 °C 27 % 32 km/h 0.0 mm High 33
21 Aug 27.3 °C 24 % 33 km/h 0.0 mm High 34
22 Aug 28.0 °C 25 % 34 km/h 0.0 mm High 34
23 Aug 28.2 °C 24 % 35 km/h 0.0 mm High 35
24 Aug 27.6 °C 25 % 37 km/h 0.0 mm High 36
25 Aug 29.9 °C 30 % 30 km/h 0.0 mm High 34
26 Aug 31.1 °C 25 % 37 km/h 0.0 mm Very high 38
27 Aug 28.9 °C 20 % 49 km/h 0.0 mm Very high 45
28 Aug 29.4 °C 19 % 41 km/h 0.0 mm Very high 42
29 Aug 29.6 °C 20 % 43 km/h 0.0 mm Very high 44
30 Aug 28.8 °C 20 % 44 km/h 0.0 mm Very high 44
31 Aug 28.7 °C 19 % 45 km/h 0.0 mm Very high 46
1 Sept 29.0 °C 20 % 42 km/h 0.0 mm Very high 44
2 Sept 28.5 °C 22 % 41 km/h 0.0 mm Very high 43
3 Sept 27.5 °C 26 % 44 km/h 0.0 mm Very high 44
4 Sept 28.8 °C 20 % 43 km/h 0.0 mm Very high 44
5 Sept 29.0 °C 23 % 44 km/h 0.0 mm Very high 44
6 Sept 29.9 °C 19 % 35 km/h 0.0 mm Very high 41
7 Sept 30.2 °C 18 % 35 km/h 0.0 mm Very high 41
8 Sept 29.9 °C 20 % 32 km/h 0.0 mm Very high 40
9 Sept 30.2 °C 21 % 35 km/h 0.0 mm Very high 41
10 Sept 30.0 °C 28 % 38 km/h 0.0 mm Very high 41
11 Sept 30.0 °C 28 % 40 km/h 0.0 mm Very high 42
12 Sept 30.0 °C 28 % 37 km/h 0.0 mm Very high 41
13 Sept 29.8 °C 25 % 37 km/h 0.0 mm Very high 41
14 Sept 30.6 °C 26 % 31 km/h 0.0 mm Very high 38
15 Sept 32.2 °C 17 % 31 km/h 0.0 mm Very high 41
16 Sept after 32.0 °C 17 % 32 km/h 0.0 mm Very high 42
17 Sept after 32.5 °C 17 % 32 km/h 0.0 mm Very high 42
18 Sept after 32.6 °C 16 % 37 km/h 0.0 mm Very high 45
19 Sept after 31.2 °C 28 % 38 km/h 0.0 mm Very high 43
20 Sept after 31.2 °C 29 % 52 km/h 0.0 mm Very high 49
21 Sept after 29.6 °C 30 % 44 km/h 0.0 mm Very high 43
22 Sept after 31.4 °C 26 % 41 km/h 0.0 mm Very high 42
23 Sept after 32.0 °C 24 % 38 km/h 0.0 mm Very high 40
24 Sept after 32.2 °C 19 % 38 km/h 0.0 mm Very high 44
25 Sept after 31.9 °C 22 % 35 km/h 0.0 mm Very high 42

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 31 Jul 2025
After · 22 Sept 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 13 August 2025 the air beside the fire reached 98 µg/m³ of PM2.5. That day averaged 56: 3.7 times the WHO daily guideline (15).

PM2.5 peak98 µg/m³
Days over the guideline32 days
PM10100 µg/m³
Optical depth0.90
1112131415161718192021222324252627282930311234567891011
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 667Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Zambia ›

Frequently asked questions

How long did the Milengi fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 7 August 2025 to 15 September 2025 (40 days). The perimeter dates it from 13 August 2025 to 8 September 2025.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 23,838 hectares (238.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Mansa (23,712 ha, 3.1 %); Milengi (298 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 32.2 °C, humidity dropped to 17 % and gusts hit 49 km/h. The fire danger index (FWI) reached 46, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Zambia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 8 September 2025 → 15 September 2025.
  2. Start date: 13 August 2025 → 7 August 2025.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 13 August 2025 to 8 September 2025. 667 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.