Skip to content
worldfires
UA · Ukraine · –

Mezhova fire, 29 July 2026 Межівський район · Mezhova

Out · last detection 18 Aug 2026, 09:05 UTC

The fire started on 29 July 2026 in Mezhova, Ukraine, and satellites saw it burning for 21 days. Copernicus mapped a burnt perimeter of 151 hectares from satellite imagery, spread across a single municipality.

It is the 111th largest in Dnipropetrovsk Oblast since 2016 (of 183 with a page). Number 629 in Ukraine in 2026, of 984.

The power measured by the satellite is low (29.5 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
151ha
Copernicus perimeter
Duration
≈ 21days
29 Jul 2026 – 18 Aug 2026
Municipalities hit
1
districts
Started on
29 Jul
2026
Heat detections
6
in a single hotspot: 29 MW
Danger at start
16
Moderate · FWI index
Average daily power
42MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 29 Jul18 Aug
18 Aug 2026

How it evolved, day by day

29 Jul 2026 · 6 MW · 2 18 Aug 2026 · 76 MW · 4
29 Jul 18 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
47km/h · peak gust
14%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 1.8 mm on 27 Aug.

This area had burned before

58% of the perimeter overlaps earlier fires recorded since 2016: 13 ha in 2024, 79 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 87 ha that had burned before.

What happened to each town

  1. Mezhova Межівський район 23,255 inhabitants · 12.9 km from the centre where it started
    151 ha reached on 29 Jul
    0.1 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land59 %
  • Mixed forest21 %
  • Agricultural areas19 %
  • Coniferous forest1.3 %

Land cover inside the perimeter as reported by Copernicus EFFIS (outside the Corine Land Cover area).

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
29 Jul 23.8 °C 35 % 47 km/h 0.6 mm Moderate 16
30 Jul 26.0 °C 32 % 46 km/h 0.0 mm High 23
31 Jul 28.5 °C 31 % 34 km/h 0.0 mm High 21
1 Aug 29.9 °C 30 % 26 km/h 0.0 mm Moderate 21
2 Aug 31.7 °C 29 % 30 km/h 0.0 mm High 25
3 Aug 32.7 °C 27 % 35 km/h 0.0 mm High 28
4 Aug 34.2 °C 23 % 32 km/h 0.0 mm High 32
5 Aug 34.0 °C 26 % 24 km/h 0.0 mm High 28
6 Aug 35.7 °C 19 % 28 km/h 0.0 mm High 33
7 Aug 36.3 °C 20 % 37 km/h 0.0 mm Very high 39
8 Aug 34.6 °C 25 % 32 km/h 0.6 mm High 35
9 Aug 32.1 °C 41 % 41 km/h 0.7 mm High 27
10 Aug 30.9 °C 37 % 39 km/h 0.0 mm High 28
11 Aug 33.8 °C 31 % 28 km/h 2.5 mm Moderate 16
12 Aug 29.5 °C 29 % 38 km/h 0.9 mm High 26
13 Aug 24.5 °C 26 % 42 km/h 0.0 mm High 30
14 Aug 23.4 °C 28 % 34 km/h 0.0 mm High 29
15 Aug 25.0 °C 28 % 28 km/h 0.0 mm High 26
16 Aug 28.1 °C 27 % 18 km/h 0.0 mm High 25
17 Aug 31.5 °C 14 % 18 km/h 0.0 mm High 35
18 Aug 33.1 °C 17 % 33 km/h 0.0 mm Very high 42
19 Aug after 26.1 °C 47 % 34 km/h 0.4 mm High 29
20 Aug after 29.2 °C 27 % 26 km/h 0.0 mm High 29
21 Aug after 32.1 °C 24 % 30 km/h 0.0 mm High 33
22 Aug after 34.9 °C 18 % 38 km/h 0.0 mm Very high 45
23 Aug after 34.9 °C 17 % 41 km/h 0.0 mm Extreme 52
24 Aug after 27.9 °C 24 % 42 km/h 0.0 mm Very high 46
25 Aug after 27.8 °C 21 % 29 km/h 0.0 mm High 38
26 Aug after 28.0 °C 29 % 30 km/h 0.0 mm Very high 38
27 Aug after 22.8 °C 47 % 30 km/h 1.8 mm Moderate 12

Its twins: fires that started in the same weather

It started with an FWI of 16.3, a minimum humidity of 35% and rain the day before. Fires in the area that started in weather like this since 2016: 20.

FWI at the start 16.3
Minimum humidity 35 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Yasynuvata fire, September 2025
111 ha 1 day FWI 16.4 Min. humidity 35 % 81 km away, in 2025

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

2 days
median duration
164 ha
median area
0 %
went past 1,000 ha
3.6 mm
rain at the end (median; 17 of 20 had it)

It burned an area similar to its twins (151 ha against a median of 164 ha) and lasted 21 days, against 2 days.

In 3 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.8 mmfirst rain
27 Aug9 days after it ended
47km/h · max. gust

It was considered over on 18 Aug, and on 27 Aug 1.8 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 17 of 20, with a median of 3.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 22 Jul 2026
After · 25 Aug 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 30 July 2026 the air beside the fire reached 9 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak9 µg/m³
Days over the guideline0 days
PM1012 µg/m³
Optical depth0.50
27 Jul29 Jul31 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 6Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Ukraine

Frequently asked questions

How long did the Mezhova fire last?
The official perimeter only gives the start date (29 July 2026). The end comes from the heat detections inside the perimeter: it burned until 18 August 2026 (21 days from 29 July 2026), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 151 hectares (1.5 km²). Official national figures may differ.
Which municipalities burned?
The fire only entered Mezhova (151 ha, 0.1 %).
Did the fire reach a town?
The fire started in Mezhova and came within 12.9 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 36.3 °C, humidity dropped to 14 % and gusts hit 47 km/h. The fire danger index (FWI) reached 42, class Very high.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Ukraine (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 20. Their median duration was 2 days and their median area 164 ha; 0 % went past 1,000 ha. In 3 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 101 · 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 101 · 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 6 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.