Skip to content
worldfires
MX · Mexico · →

Metlatónoc fire, April 2024 Metlatónoc, Cochoapa el Grande

Out · last detection 21 Apr 2024, 08:02 UTC

The fire started on 14 April 2024 in Metlatónoc, Mexico, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,806 hectares from heat detections, spread across 2 municipalities.

It is the 490th largest in Guerrero since 2016 (of 612 with a page). Number 224 in Mexico in 2024, of 289.

The power measured by the satellite is low (11.9 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Compare with…
Burnt area
1,806ha
GWIS perimeter (Copernicus)
Duration
8days
14 Apr 2024 – 21 Apr 2024
Municipalities hit
2
municipalities
Started on
14 Apr
2024
Heat detections
106
in a single hotspot: 12 MW
Danger at start
26
High · FWI index
Average daily power
45MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Apr21 Apr
21 Apr 2024

How it evolved, day by day

14 Apr 2024 · 50 MW · 9 15 Apr 2024 · 23 MW · 11 16 Apr 2024 · 68 MW · 25 17 Apr 2024 · 64 MW · 22 18 Apr 2024 · 39 MW · 9 19 Apr 2024 · 62 MW · 13 20 Apr 2024 · 48 MW · 13 21 Apr 2024 · 9 MW · 4
14 Apr 16 Apr 18 Apr 20 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
48km/h · peak gust
41%lowest humidity

It had gone 56 days without rain (1 mm or more) when it started.

This area had burned before

71% of the perimeter overlaps earlier fires recorded since 2016: 1,003 ha in 2019, 303 ha in 2021.

How big is it?

10 km
It burned the equivalent of 1.1% of the area of London (18 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Metlatónoc where it started
    1,482 ha reached on 14 Apr
    2.4 %
  2. 333 ha reached on 16 Apr
    0.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

Official record

According to CONAFOR, this fire started on 14 April 2024 and burned 1,156 ha (the satellite measured 1,806 ha). The two figures differ a lot, so these may not be exactly the same fire: take them as nearby records.

CONAFOR (Comisión Nacional Forestal), estadística de incendios forestales en datos.gob.mx (CC BY 4.0). This is the agency’s consolidated statistic: it measures the area in its own way, which is why it can differ from the satellite.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Apr 31.7 °C 41 % 47 km/h 0.0 mm High 26
15 Apr 32.1 °C 43 % 40 km/h 0.0 mm High 25
16 Apr 32.6 °C 44 % 41 km/h 0.0 mm High 25
17 Apr 32.2 °C 44 % 42 km/h 0.0 mm High 26
18 Apr 32.0 °C 45 % 38 km/h 0.0 mm High 25
19 Apr 31.6 °C 44 % 37 km/h 0.0 mm High 25
20 Apr 31.0 °C 42 % 39 km/h 0.0 mm High 26
21 Apr 31.5 °C 41 % 48 km/h 0.0 mm High 27
22 Apr after 31.3 °C 43 % 41 km/h 0.1 mm High 26
23 Apr after 31.3 °C 43 % 41 km/h 0.1 mm High 27
24 Apr after 32.1 °C 34 % 37 km/h 0.0 mm High 29
25 Apr after 32.3 °C 35 % 42 km/h 0.0 mm High 30
26 Apr after 30.5 °C 44 % 40 km/h 0.0 mm High 28
27 Apr after 30.0 °C 44 % 39 km/h 0.0 mm High 28
28 Apr after 30.8 °C 34 % 37 km/h 0.0 mm High 28
29 Apr after 31.2 °C 34 % 38 km/h 0.0 mm High 29
30 Apr after 32.2 °C 35 % 42 km/h 0.0 mm High 30
1 May after 31.6 °C 39 % 37 km/h 0.0 mm High 30

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Apr 2024
After · 28 Apr 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 23 April 2024 the air beside the fire reached 39 µg/m³ of PM2.5. That day averaged 32: 2.1 times the WHO daily guideline (15).

PM2.5 peak39 µg/m³
Days over the guideline8 days
PM1058 µg/m³
Optical depth1.00
12131415161718192021222324
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 106Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mexico ›

Frequently asked questions

How long did the Metlatónoc fire last?
GWIS (Copernicus) dates it between 14 April 2024 and 21 April 2024: 8 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,806 hectares (18.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Metlatónoc (1,482 ha, 2.4 %); Cochoapa el Grande (333 ha, 0.5 %).
What was the weather like?
During the fire the temperature reached 32.6 °C, humidity dropped to 41 % and gusts hit 48 km/h. The fire danger index (FWI) reached 27, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mexico (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings ›

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 106 Suomi-NPP VIIRS detections on those dates.
  • Compared with CONAFOR: 1,156 official ha against 1,806 ha of perimeter; similar, but with reservations.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.