Skip to content
worldfires
ID · Indonesia · –

Merauke fire, 24 September 2026 Merauke

Out · last detection 12 Nov 2026, 04:33 UTC

The fire started on 24 September 2026 in Merauke, Indonesia, and satellites saw it burning for 50 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,163 hectares from heat detections, spread across a single municipality.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

Number 92 in Indonesia in 2026, of 994.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
8,163ha
GWIS perimeter (Copernicus)
Duration
50days
24 Sept 2026 – 12 Nov 2026
Municipalities hit
1
regencies
Started on
24 Sept
2026
Heat detections
499
in a single hotspot: 289 MW
Danger at start
24
High · FWI index
Average daily power
146MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 24 Sept12 Nov
12 Nov 2026

How it evolved, day by day

24 Sept 2026 · 40 MW · 7 25 Sept 2026 · 6 MW · 5 26 Sept 2026 · 151 MW · 20 27 Sept 2026 · 135 MW · 20 28 Sept 2026 · 63 MW · 10 29 Sept 2026 · 44 MW · 7 30 Sept 2026 · 477 MW · 24 1 Oct 2026 · 100 MW · 17 2 Oct 2026 · 539 MW · 35 3 Oct 2026 · 7 MW · 2 4 Oct 2026 · 1 MW · 1 5 Oct 2026 · 12 MW · 4 6 Oct 2026 · 492 MW · 28 7 Oct 2026 · 31 MW · 7 8 Oct 2026 · 105 MW · 17 9 Oct 2026 · 0 MW · 0 10 Oct 2026 · 12 MW · 4 11 Oct 2026 · 198 MW · 33 12 Oct 2026 · 1,150 MW · 30 13 Oct 2026 · 0 MW · 0 14 Oct 2026 · 0 MW · 0 15 Oct 2026 · 0 MW · 0 16 Oct 2026 · 12 MW · 9 17 Oct 2026 · 31 MW · 12 18 Oct 2026 · 62 MW · 8 19 Oct 2026 · 80 MW · 9 20 Oct 2026 · 17 MW · 1 21 Oct 2026 · 41 MW · 6 22 Oct 2026 · 6 MW · 5 23 Oct 2026 · 9 MW · 1 24 Oct 2026 · 8 MW · 2 25 Oct 2026 · 0 MW · 0 26 Oct 2026 · 25 MW · 9 28 Oct 2026 · 225 MW · 22 29 Oct 2026 · 98 MW · 10 30 Oct 2026 · 0 MW · 0 31 Oct 2026 · 56 MW · 6 1 Nov 2026 · 19 MW · 3 2 Nov 2026 · 0 MW · 0 3 Nov 2026 · 9 MW · 5 4 Nov 2026 · 184 MW · 18 5 Nov 2026 · 497 MW · 54 6 Nov 2026 · 0 MW · 0 7 Nov 2026 · 0 MW · 0 10 Nov 2026 · 139 MW · 20 11 Nov 2026 · 411 MW · 22 12 Nov 2026 · 65 MW · 6
24 Sept 4 Oct 12 Oct 24 Oct 4 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (155 passes) and with what wind. Watch the film

The weather it burned in

36°high
45km/h · peak gust
34%lowest humidity

It had gone 4 days without rain (1 mm or more) when it started. Rain came after the fire: 6.6 mm on 13 Nov.

This area had burned before

16% of the perimeter overlaps earlier fires recorded since 2016: 262 ha in 2017, 38 ha in 2018, 1,064 ha in 2019, 142 ha in 2020, 72 ha in 2021, 833 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 1,342 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 5.2% of the area of London (82 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Merauke where it started
    8,263 ha reached on 24 Sept
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

Day High Min. humidity Peak gust Rain Danger (FWI)
24 Sept 31.4 °C 52 % 38 km/h 0.2 mm High 24
25 Sept 32.0 °C 52 % 40 km/h 0.4 mm High 22
26 Sept 31.9 °C 55 % 40 km/h 1.2 mm Moderate 20
27 Sept 32.1 °C 53 % 41 km/h 0.5 mm High 23
28 Sept 31.3 °C 56 % 38 km/h 1.5 mm Moderate 18
29 Sept 31.4 °C 52 % 41 km/h 0.5 mm Moderate 21
30 Sept 32.9 °C 47 % 39 km/h 0.2 mm High 27
1 Oct 32.1 °C 51 % 42 km/h 1.0 mm High 28
2 Oct 31.8 °C 51 % 45 km/h 0.3 mm High 27
3 Oct 30.7 °C 54 % 41 km/h 0.3 mm High 25
4 Oct 31.9 °C 49 % 39 km/h 0.1 mm High 26
5 Oct 33.1 °C 47 % 39 km/h 0.3 mm High 29
6 Oct 33.0 °C 46 % 41 km/h 0.0 mm High 31
7 Oct 32.4 °C 46 % 39 km/h 0.0 mm High 31
8 Oct 34.8 °C 34 % 36 km/h 0.0 mm High 35
9 Oct 33.5 °C 45 % 36 km/h 0.0 mm High 34
10 Oct 33.9 °C 43 % 40 km/h 0.0 mm High 37
11 Oct 34.2 °C 43 % 37 km/h 0.0 mm High 35
12 Oct 33.2 °C 46 % 40 km/h 0.0 mm High 38
13 Oct 33.6 °C 48 % 38 km/h 0.0 mm High 35
14 Oct 33.5 °C 52 % 36 km/h 1.0 mm High 24
15 Oct 32.6 °C 56 % 40 km/h 2.2 mm Moderate 15
16 Oct 33.5 °C 46 % 40 km/h 0.1 mm High 29
17 Oct 33.5 °C 46 % 42 km/h 0.1 mm High 30
18 Oct 34.4 °C 44 % 42 km/h 0.0 mm High 33
19 Oct 33.5 °C 48 % 37 km/h 0.2 mm High 33
20 Oct 33.3 °C 48 % 43 km/h 0.0 mm High 34
21 Oct 35.7 °C 40 % 42 km/h 0.5 mm High 34
22 Oct 34.8 °C 45 % 42 km/h 1.7 mm High 29
23 Oct 34.5 °C 50 % 37 km/h 2.1 mm Moderate 20
24 Oct 34.3 °C 49 % 38 km/h 1.1 mm Moderate 14
25 Oct 35.1 °C 49 % 38 km/h 0.3 mm High 26
26 Oct 35.6 °C 44 % 40 km/h 0.9 mm High 26
27 Oct 34.6 °C 46 % 34 km/h 1.2 mm High 25
28 Oct 35.3 °C 44 % 37 km/h 0.6 mm High 29
29 Oct 36.4 °C 41 % 39 km/h 2.9 mm High 29
30 Oct 34.8 °C 50 % 35 km/h 3.9 mm Low 9
31 Oct 34.1 °C 51 % 36 km/h 1.5 mm Moderate 14
1 Nov 35.0 °C 46 % 33 km/h 5.4 mm Low 6
2 Nov 34.0 °C 51 % 36 km/h 2.8 mm Moderate 12
3 Nov 33.7 °C 51 % 27 km/h 3.2 mm Low 10
4 Nov 35.4 °C 41 % 33 km/h 0.4 mm Moderate 15
5 Nov 35.8 °C 39 % 32 km/h 0.6 mm High 22
6 Nov 35.5 °C 42 % 30 km/h 1.6 mm Moderate 16
7 Nov 34.9 °C 43 % 30 km/h 0.7 mm Moderate 21
8 Nov 36.3 °C 43 % 30 km/h 2.9 mm Moderate 19
9 Nov 34.3 °C 45 % 20 km/h 0.8 mm Low 8
10 Nov 34.2 °C 51 % 30 km/h 9.4 mm Low 6
11 Nov 34.8 °C 48 % 37 km/h 2.3 mm Low 8
12 Nov 33.4 °C 54 % 33 km/h 4.7 mm Low 6
13 Nov after 35.3 °C 52 % 27 km/h 6.6 mm Very low 2

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 17 Sept 2026
After · 19 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 30 September 2026 the air beside the fire reached 215 µg/m³ of PM2.5. That day averaged 68: 4.5 times the WHO daily guideline (15).

PM2.5 peak215 µg/m³
Days over the guideline11 days
PM10219 µg/m³
Optical depth3.12
22 Sept25 Sept28 Sept1 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 499Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Indonesia

Frequently asked questions

How long did the Merauke fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 24 September 2026 to 12 November 2026 (50 days). The perimeter dates it from 24 September 2026 to 11 November 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,163 hectares (81.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Merauke (8,263 ha, 0.2 %).
Is the Merauke fire still active?
No fire detections since 12 Nov 2026, 04:33 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 36.4 °C, humidity dropped to 34 % and gusts hit 45 km/h. The fire danger index (FWI) reached 38, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Indonesia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 6 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 24 October 2026 → 12 November 2026.
  2. Area: 7,977 → 8,163 ha.
  3. Area: 5,805 → 7,977 ha.
  4. Area: 5,328 → 5,805 ha.
  5. Area: 5,101 → 5,328 ha.
  6. Area: 4,958 → 5,101 ha.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 24 September 2026 to 11 November 2026. 499 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.