Skip to content
worldfires
ID · Indonesia · –

Merauke fire, 21 September 2026 Merauke

Out · last detection 11 Nov 2026, 04:53 UTC

The fire started on 21 September 2026 in Merauke, Indonesia, and satellites saw it burning for 52 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 10,738 hectares from heat detections, spread across a single municipality.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

Number 61 in Indonesia in 2026, of 995.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
10,738ha
GWIS perimeter (Copernicus)
Duration
52days
21 Sept 2026 – 11 Nov 2026
Municipalities hit
1
regencies
Started on
21 Sept
2026
Heat detections
668
in a single hotspot: 406 MW
Danger at start
19
Moderate · FWI index
Average daily power
160MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 21 Sept11 Nov
11 Nov 2026

How it evolved, day by day

21 Sept 2026 · 39 MW · 7 24 Sept 2026 · 89 MW · 6 25 Sept 2026 · 785 MW · 33 26 Sept 2026 · 39 MW · 16 27 Sept 2026 · 198 MW · 4 28 Sept 2026 · 89 MW · 18 29 Sept 2026 · 156 MW · 10 30 Sept 2026 · 800 MW · 49 1 Oct 2026 · 335 MW · 48 2 Oct 2026 · 222 MW · 15 3 Oct 2026 · 77 MW · 23 4 Oct 2026 · 412 MW · 29 5 Oct 2026 · 28 MW · 10 6 Oct 2026 · 121 MW · 57 7 Oct 2026 · 13 MW · 5 8 Oct 2026 · 53 MW · 12 9 Oct 2026 · 23 MW · 5 10 Oct 2026 · 114 MW · 8 11 Oct 2026 · 1,565 MW · 93 12 Oct 2026 · 57 MW · 9 13 Oct 2026 · 2 MW · 1 14 Oct 2026 · 0 MW · 0 15 Oct 2026 · 0 MW · 0 16 Oct 2026 · 57 MW · 29 17 Oct 2026 · 182 MW · 28 18 Oct 2026 · 91 MW · 9 19 Oct 2026 · 86 MW · 10 20 Oct 2026 · 3 MW · 3 21 Oct 2026 · 11 MW · 2 22 Oct 2026 · 8 MW · 8 23 Oct 2026 · 14 MW · 3 24 Oct 2026 · 2 MW · 1 25 Oct 2026 · 0 MW · 0 26 Oct 2026 · 0 MW · 0 27 Oct 2026 · 42 MW · 8 28 Oct 2026 · 32 MW · 5 29 Oct 2026 · 24 MW · 4 30 Oct 2026 · 163 MW · 24 31 Oct 2026 · 95 MW · 12 1 Nov 2026 · 60 MW · 7 2 Nov 2026 · 2 MW · 4 3 Nov 2026 · 44 MW · 11 4 Nov 2026 · 344 MW · 27 5 Nov 2026 · 52 MW · 14 6 Nov 2026 · 0 MW · 0 8 Nov 2026 · 0 MW · 0 11 Nov 2026 · 11 MW · 1
21 Sept 3 Oct 11 Oct 23 Oct 2 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (171 passes) and with what wind. Watch the film

The weather it burned in

38°high
40km/h · peak gust
21%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 7.3 mm on 12 Nov.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 6.8% of the area of London (107 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Merauke where it started
    10,773 ha reached on 21 Sept
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area7.3 ha
Residents≈ 1,500

Inside the perimeter there were about 7.3 hectares of built-up land and about 1,500 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

Day High Min. humidity Peak gust Rain Danger (FWI)
21 Sept 33.3 °C 41 % 29 km/h 0.0 mm Moderate 19
22 Sept 33.0 °C 47 % 31 km/h 2.4 mm Low 11
23 Sept 31.8 °C 47 % 34 km/h 0.0 mm Moderate 18
24 Sept 34.0 °C 42 % 35 km/h 0.8 mm High 24
25 Sept 34.2 °C 41 % 33 km/h 1.1 mm Moderate 19
26 Sept 34.7 °C 35 % 37 km/h 0.2 mm High 29
27 Sept 34.9 °C 34 % 35 km/h 0.0 mm High 30
28 Sept 35.1 °C 33 % 38 km/h 0.0 mm High 32
29 Sept 35.2 °C 31 % 35 km/h 0.0 mm High 31
30 Sept 35.5 °C 35 % 32 km/h 0.1 mm High 33
1 Oct 34.6 °C 41 % 39 km/h 0.8 mm High 30
2 Oct 34.5 °C 35 % 40 km/h 0.0 mm High 32
3 Oct 32.5 °C 44 % 35 km/h 0.1 mm High 28
4 Oct 31.9 °C 47 % 32 km/h 0.0 mm High 27
5 Oct 35.5 °C 33 % 30 km/h 0.0 mm High 28
6 Oct 35.9 °C 29 % 32 km/h 0.0 mm High 38
7 Oct 37.1 °C 27 % 26 km/h 0.0 mm High 34
8 Oct 36.8 °C 28 % 28 km/h 0.0 mm High 32
9 Oct 36.0 °C 34 % 23 km/h 0.3 mm High 32
10 Oct 36.9 °C 23 % 24 km/h 0.0 mm High 35
11 Oct 36.9 °C 21 % 30 km/h 0.0 mm High 38
12 Oct 36.5 °C 28 % 32 km/h 0.0 mm High 37
13 Oct 36.2 °C 31 % 29 km/h 0.0 mm High 36
14 Oct 35.6 °C 40 % 28 km/h 1.6 mm High 23
15 Oct 34.9 °C 46 % 25 km/h 2.4 mm Low 10
16 Oct 35.9 °C 32 % 33 km/h 0.0 mm High 33
17 Oct 36.3 °C 29 % 32 km/h 0.0 mm High 31
18 Oct 36.1 °C 31 % 30 km/h 0.0 mm High 32
19 Oct 35.8 °C 36 % 31 km/h 0.7 mm High 29
20 Oct 37.0 °C 27 % 30 km/h 0.0 mm High 34
21 Oct 37.5 °C 30 % 31 km/h 0.0 mm High 32
22 Oct 36.3 °C 38 % 31 km/h 1.2 mm High 25
23 Oct 36.3 °C 38 % 22 km/h 7.4 mm Moderate 18
24 Oct 36.6 °C 40 % 23 km/h 3.5 mm Very low 5
25 Oct 35.6 °C 47 % 25 km/h 1.3 mm Low 7
26 Oct 34.3 °C 51 % 22 km/h 6.6 mm Low 8
27 Oct 33.6 °C 52 % 25 km/h 3.4 mm Very low 2
28 Oct 34.8 °C 44 % 22 km/h 0.6 mm Very low 4
29 Oct 35.2 °C 51 % 24 km/h 4.8 mm Low 8
30 Oct 33.8 °C 53 % 28 km/h 5.7 mm Very low 2
31 Oct 35.1 °C 42 % 24 km/h 0.6 mm Very low 5
1 Nov 33.7 °C 54 % 16 km/h 1.8 mm Very low 4
2 Nov 33.3 °C 52 % 20 km/h 3.2 mm Very low 3
3 Nov 32.7 °C 58 % 17 km/h 4.4 mm Very low 2
4 Nov 34.3 °C 44 % 22 km/h 8.8 mm Very low 1
5 Nov 34.8 °C 43 % 22 km/h 0.8 mm Low 6
6 Nov 34.1 °C 47 % 24 km/h 1.0 mm Low 9
7 Nov 33.5 °C 50 % 20 km/h 1.2 mm Low 6
8 Nov 34.1 °C 53 % 19 km/h 3.7 mm Very low 5
9 Nov 30.5 °C 62 % 16 km/h 0.2 mm Very low 1
10 Nov 33.3 °C 61 % 21 km/h 7.0 mm Very low 5
11 Nov 34.2 °C 53 % 30 km/h 7.4 mm Very low 2
12 Nov after 33.7 °C 59 % 24 km/h 7.3 mm Very low 1

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 14 Sept 2026
After · 18 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 2 October 2026 the air beside the fire reached 177 µg/m³ of PM2.5. That day averaged 58: 3.9 times the WHO daily guideline (15).

PM2.5 peak177 µg/m³
Days over the guideline11 days
PM10181 µg/m³
Optical depth1.64
19 Sept22 Sept25 Sept28 Sept1 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 668Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Indonesia

Frequently asked questions

How long did the Merauke fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 21 September 2026 to 11 November 2026 (52 days). The perimeter dates it from 21 September 2026 to 8 November 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 10,738 hectares (107.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Merauke (10,773 ha, 0.2 %).
Is the Merauke fire still active?
No fire detections since 11 Nov 2026, 04:53 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 37.5 °C, humidity dropped to 21 % and gusts hit 40 km/h. The fire danger index (FWI) reached 38, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Indonesia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 24 October 2026 → 11 November 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 21 September 2026 to 8 November 2026. 668 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.