Skip to content
worldfires
ID · Indonesia · –

Merauke fire, 15 September 2026 Merauke

Out · last detection 20 Oct 2026, 04:21 UTC

The fire started on 15 September 2026 in Merauke, Indonesia, and satellites saw it burning for 35 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 16,576 hectares from heat detections, spread across a single municipality.

Number 36 in Indonesia in 2026, of 993.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
16,576ha
GWIS perimeter (Copernicus)
Duration
35days
15 Sept 2026 – 19 Oct 2026
Municipalities hit
1
regencies
Started on
15 Sept
2026
Heat detections
641
in a single hotspot: 95 MW
Danger at start
39
Very high · FWI index
Average daily power
143MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Sept19 Oct
20 Oct 2026

How it evolved, day by day

15 Sept 2026 · 35 MW · 6 16 Sept 2026 · 62 MW · 12 17 Sept 2026 · 260 MW · 28 18 Sept 2026 · 3 MW · 1 19 Sept 2026 · 9 MW · 5 20 Sept 2026 · 10 MW · 4 21 Sept 2026 · 10 MW · 3 22 Sept 2026 · 20 MW · 4 23 Sept 2026 · 75 MW · 7 24 Sept 2026 · 401 MW · 18 25 Sept 2026 · 180 MW · 20 26 Sept 2026 · 89 MW · 26 27 Sept 2026 · 131 MW · 22 28 Sept 2026 · 76 MW · 16 29 Sept 2026 · 140 MW · 22 30 Sept 2026 · 60 MW · 8 1 Oct 2026 · 21 MW · 7 2 Oct 2026 · 164 MW · 28 3 Oct 2026 · 3 MW · 3 4 Oct 2026 · 54 MW · 11 5 Oct 2026 · 159 MW · 31 6 Oct 2026 · 393 MW · 39 7 Oct 2026 · 594 MW · 51 8 Oct 2026 · 791 MW · 94 9 Oct 2026 · 376 MW · 53 10 Oct 2026 · 243 MW · 23 11 Oct 2026 · 53 MW · 12 12 Oct 2026 · 60 MW · 15 13 Oct 2026 · 1 MW · 1 16 Oct 2026 · 1 MW · 1 17 Oct 2026 · 81 MW · 20 18 Oct 2026 · 52 MW · 12 19 Oct 2026 · 207 MW · 34 20 Oct 2026 · 63 MW · 4
15 Sept 22 Sept 29 Sept 8 Oct 13 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (105 passes) and with what wind. Watch the film

The weather it burned in

31°high
53km/h · peak gust
48%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started.

This area had burned before

16% of the perimeter overlaps earlier fires recorded since 2016: 553 ha in 2016, 449 ha in 2017, 534 ha in 2018, 46 ha in 2019, 399 ha in 2020, 1,335 ha in 2023, 544 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 2,589 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 10% of the area of London (166 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Merauke where it started
    16,631 ha reached on 15 Sept
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Sept 28.3 °C 57 % 45 km/h 0.4 mm Very high 39
16 Sept 27.7 °C 64 % 42 km/h 0.3 mm High 30
17 Sept 29.2 °C 54 % 44 km/h 0.0 mm High 38
18 Sept 27.9 °C 62 % 53 km/h 0.9 mm High 38
19 Sept 27.2 °C 64 % 52 km/h 0.1 mm High 37
20 Sept 27.8 °C 61 % 44 km/h 0.0 mm High 31
21 Sept 28.4 °C 62 % 42 km/h 0.0 mm High 31
22 Sept 27.9 °C 64 % 40 km/h 0.0 mm High 32
23 Sept 28.7 °C 59 % 42 km/h 0.0 mm High 33
24 Sept 28.3 °C 61 % 40 km/h 0.0 mm High 36
25 Sept 30.0 °C 53 % 47 km/h 0.0 mm Very high 42
26 Sept 29.5 °C 57 % 46 km/h 0.0 mm Very high 41
27 Sept 29.5 °C 57 % 49 km/h 0.0 mm Very high 43
28 Sept 30.4 °C 51 % 45 km/h 0.0 mm Very high 45
29 Sept 30.0 °C 52 % 40 km/h 0.0 mm Very high 40
30 Sept 29.7 °C 60 % 45 km/h 0.3 mm Very high 44
1 Oct 29.5 °C 62 % 49 km/h 0.4 mm Very high 40
2 Oct 28.5 °C 60 % 48 km/h 0.1 mm Very high 39
3 Oct 30.1 °C 49 % 45 km/h 0.0 mm Very high 41
4 Oct 29.9 °C 53 % 46 km/h 0.0 mm High 37
5 Oct 30.2 °C 53 % 43 km/h 0.0 mm Very high 40
6 Oct 30.2 °C 51 % 42 km/h 0.0 mm Very high 43
7 Oct 30.0 °C 53 % 39 km/h 0.0 mm Very high 39
8 Oct 30.7 °C 49 % 37 km/h 0.0 mm High 34
9 Oct 30.4 °C 51 % 36 km/h 0.0 mm High 37
10 Oct 30.8 °C 51 % 41 km/h 0.0 mm Very high 40
11 Oct 31.1 °C 50 % 44 km/h 0.0 mm Very high 41
12 Oct 31.0 °C 50 % 45 km/h 0.0 mm Very high 41
13 Oct 30.5 °C 53 % 37 km/h 0.0 mm Very high 38
14 Oct 30.5 °C 58 % 36 km/h 0.1 mm Very high 39
15 Oct 30.1 °C 60 % 42 km/h 0.0 mm Very high 40
16 Oct 31.2 °C 48 % 44 km/h 0.0 mm Very high 46
17 Oct 31.1 °C 48 % 39 km/h 0.0 mm Very high 42
18 Oct 31.1 °C 49 % 42 km/h 0.0 mm Very high 43
19 Oct 31.1 °C 50 % 44 km/h 0.0 mm Very high 42
20 Oct after 31.3 °C 50 % 44 km/h 0.0 mm Very high 45
21 Oct after 32.0 °C 51 % 42 km/h 0.0 mm Very high 40
22 Oct after 31.3 °C 56 % 38 km/h 0.0 mm High 38
23 Oct after 31.3 °C 57 % 35 km/h 0.1 mm High 38
24 Oct after 31.7 °C 55 % 36 km/h 0.0 mm High 36
25 Oct after 32.3 °C 50 % 40 km/h 0.0 mm High 35
26 Oct after 31.4 °C 57 % 37 km/h 0.1 mm Very high 38
27 Oct after 31.2 °C 56 % 44 km/h 0.0 mm High 37
28 Oct after 31.5 °C 55 % 41 km/h 0.0 mm Very high 40
29 Oct after 31.9 °C 57 % 41 km/h 0.0 mm Very high 39

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Sept 2026
After · 26 Oct 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 30 September 2026 the air beside the fire reached 56 µg/m³ of PM2.5. That day averaged 20: 1.3 times the WHO daily guideline (15).

PM2.5 peak56 µg/m³
Days over the guideline4 days
PM1059 µg/m³
Optical depth1.13
19 Sept22 Sept25 Sept28 Sept1 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 641Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Indonesia

Frequently asked questions

How long did the Merauke fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 15 September 2026 to 19 October 2026 (35 days). The perimeter dates it from 21 September 2026 to 12 October 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 16,576 hectares (165.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Merauke (16,631 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 31.2 °C, humidity dropped to 48 % and gusts hit 53 km/h. The fire danger index (FWI) reached 46, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Indonesia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 19,468 → 16,584 ha.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 5 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 21 September 2026 to 12 October 2026. 641 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.