Skip to content
worldfires
ID · Indonesia · –

Merauke fire, 17 September 2026 Merauke

Out · last detection 5 Nov 2026, 16:09 UTC

The fire started on 17 September 2026 in Merauke, Indonesia, and satellites saw it burning for 49 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 18,501 hectares from heat detections, spread across a single municipality.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

We are reviewing this page: some of its data look inconsistent (the place, the dates or the area), so treat them with caution.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
18,501ha
GWIS perimeter (Copernicus)
Duration
49days
17 Sept 2026 – 4 Nov 2026
Municipalities hit
1
regencies
Started on
17 Sept
2026
Heat detections
1,064
in a single hotspot: 70 MW
Danger at start
27
High · FWI index
Average daily power
111MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 17 Sept4 Nov
5 Nov 2026

How it evolved, day by day

18 Sept 2026 · 35 MW · 2 19 Sept 2026 · 22 MW · 6 21 Sept 2026 · 7 MW · 2 22 Sept 2026 · 3 MW · 1 23 Sept 2026 · 39 MW · 3 24 Sept 2026 · 115 MW · 27 25 Sept 2026 · 558 MW · 60 26 Sept 2026 · 140 MW · 19 27 Sept 2026 · 201 MW · 18 28 Sept 2026 · 7 MW · 4 29 Sept 2026 · 196 MW · 17 30 Sept 2026 · 87 MW · 32 1 Oct 2026 · 97 MW · 8 2 Oct 2026 · 229 MW · 24 3 Oct 2026 · 29 MW · 9 4 Oct 2026 · 158 MW · 14 5 Oct 2026 · 139 MW · 57 6 Oct 2026 · 308 MW · 107 7 Oct 2026 · 413 MW · 66 8 Oct 2026 · 482 MW · 50 9 Oct 2026 · 4 MW · 4 10 Oct 2026 · 77 MW · 28 11 Oct 2026 · 427 MW · 115 12 Oct 2026 · 24 MW · 4 13 Oct 2026 · 5 MW · 2 14 Oct 2026 · 1 MW · 1 15 Oct 2026 · 6 MW · 3 16 Oct 2026 · 63 MW · 34 17 Oct 2026 · 127 MW · 54 18 Oct 2026 · 129 MW · 23 19 Oct 2026 · 3 MW · 2 20 Oct 2026 · 34 MW · 7 21 Oct 2026 · 131 MW · 58 22 Oct 2026 · 83 MW · 61 23 Oct 2026 · 7 MW · 1 24 Oct 2026 · 23 MW · 5 25 Oct 2026 · 3 MW · 3 26 Oct 2026 · 37 MW · 22 27 Oct 2026 · 49 MW · 27 28 Oct 2026 · 106 MW · 22 29 Oct 2026 · 37 MW · 8 1 Nov 2026 · 5 MW · 2 2 Nov 2026 · 11 MW · 1 3 Nov 2026 · 7 MW · 2 4 Nov 2026 · 41 MW · 6 5 Nov 2026 · 383 MW · 43
25 Sept 9 Oct 19 Oct 29 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
45km/h · peak gust
17%lowest humidity

It had gone 15 days without rain (1 mm or more) when it started. Rain came after the fire: 9.9 mm on 8 Nov.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 12% of the area of London (185 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Merauke where it started
    25,240 ha reached on 18 Sept
    0.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

Day High Min. humidity Peak gust Rain Danger (FWI)
17 Sept 34.4 °C 37 % 39 km/h 0.6 mm High 27
18 Sept 34.2 °C 42 % 44 km/h 0.8 mm High 23
19 Sept 32.5 °C 41 % 45 km/h 0.0 mm High 27
20 Sept 32.9 °C 40 % 35 km/h 0.0 mm High 24
21 Sept 33.1 °C 40 % 31 km/h 0.0 mm High 24
22 Sept 33.0 °C 43 % 34 km/h 0.0 mm High 24
23 Sept 32.7 °C 44 % 36 km/h 0.0 mm High 26
24 Sept 34.5 °C 38 % 36 km/h 0.1 mm High 28
25 Sept 34.5 °C 40 % 35 km/h 0.5 mm High 29
26 Sept 35.0 °C 36 % 40 km/h 0.5 mm High 30
27 Sept 36.5 °C 29 % 36 km/h 0.0 mm High 36
28 Sept 36.0 °C 32 % 40 km/h 0.0 mm High 36
29 Sept 35.7 °C 31 % 36 km/h 0.0 mm High 36
30 Sept 36.1 °C 32 % 30 km/h 0.6 mm High 35
1 Oct 35.7 °C 35 % 41 km/h 0.5 mm High 33
2 Oct 36.3 °C 30 % 38 km/h 0.0 mm Very high 40
3 Oct 31.5 °C 48 % 34 km/h 0.8 mm High 31
4 Oct 34.5 °C 38 % 35 km/h 0.5 mm High 26
5 Oct 36.6 °C 31 % 38 km/h 0.2 mm High 28
6 Oct 37.5 °C 23 % 35 km/h 0.0 mm Very high 41
7 Oct 37.6 °C 24 % 36 km/h 0.0 mm Very high 42
8 Oct 37.7 °C 27 % 34 km/h 0.0 mm Very high 38
9 Oct 36.6 °C 29 % 37 km/h 0.1 mm High 36
10 Oct 37.9 °C 22 % 38 km/h 0.0 mm Very high 40
11 Oct 37.9 °C 17 % 38 km/h 0.0 mm Very high 42
12 Oct 37.6 °C 21 % 38 km/h 0.0 mm Very high 43
13 Oct 37.7 °C 27 % 35 km/h 0.0 mm Very high 39
14 Oct 36.8 °C 33 % 30 km/h 0.3 mm High 35
15 Oct 36.4 °C 34 % 31 km/h 2.0 mm High 35
16 Oct 37.2 °C 28 % 36 km/h 0.0 mm High 34
17 Oct 37.5 °C 25 % 40 km/h 0.0 mm High 37
18 Oct 37.8 °C 25 % 41 km/h 0.0 mm Very high 38
19 Oct 37.1 °C 29 % 35 km/h 0.2 mm Very high 40
20 Oct 38.3 °C 26 % 40 km/h 0.1 mm Very high 41
21 Oct 38.0 °C 30 % 35 km/h 0.8 mm Very high 38
22 Oct 37.8 °C 32 % 32 km/h 1.1 mm High 33
23 Oct 37.0 °C 43 % 38 km/h 1.7 mm High 23
24 Oct 38.3 °C 34 % 28 km/h 2.3 mm Moderate 16
25 Oct 37.4 °C 36 % 27 km/h 1.8 mm Moderate 16
26 Oct 35.6 °C 43 % 24 km/h 2.5 mm Moderate 14
27 Oct 35.1 °C 44 % 26 km/h 7.2 mm Low 8
28 Oct 35.6 °C 42 % 30 km/h 3.6 mm Low 5
29 Oct 37.0 °C 36 % 22 km/h 8.9 mm Low 7
30 Oct 31.5 °C 62 % 33 km/h 0.6 mm Very low 2
31 Oct 36.1 °C 41 % 31 km/h 0.5 mm Moderate 11
1 Nov 35.0 °C 41 % 20 km/h 3.7 mm Very low 3
2 Nov 34.8 °C 47 % 22 km/h 2.8 mm Low 7
3 Nov 34.4 °C 54 % 25 km/h 6.6 mm Very low 3
4 Nov 36.1 °C 38 % 25 km/h 1.8 mm Very low 3
5 Nov after 36.6 °C 35 % 23 km/h 0.1 mm Moderate 11
6 Nov after 36.0 °C 34 % 28 km/h 0.3 mm Moderate 14
7 Nov after 35.9 °C 38 % 28 km/h 0.6 mm Moderate 15
8 Nov after 35.6 °C 41 % 28 km/h 9.9 mm Moderate 16

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 10 Sept 2026
After · 11 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 30 September 2026 the air beside the fire reached 225 µg/m³ of PM2.5. That day averaged 92: 6.2 times the WHO daily guideline (15).

PM2.5 peak225 µg/m³
Days over the guideline17 days
PM10229 µg/m³
Optical depth3.59
16 Sept20 Sept24 Sept28 Sept2 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,064Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Indonesia

Frequently asked questions

How long did the Merauke fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 17 September 2026 to 4 November 2026 (49 days). The perimeter dates it from 18 September 2026 to 28 October 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 18,501 hectares (185.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Merauke (25,240 ha, 0.6 %).
Is the Merauke fire still active?
No fire detections since 5 Nov 2026, 16:09 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 38.3 °C, humidity dropped to 17 % and gusts hit 45 km/h. The fire danger index (FWI) reached 43, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Indonesia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 5 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 29 October 2026 → 4 November 2026.
  2. Area: 25,149 → 18,524 ha.
  3. Last day with fire: 24 October 2026 → 29 October 2026.
  4. Area: 24,555 → 25,149 ha.
  5. Area: 23,903 → 24,555 ha.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 18 September 2026 to 28 October 2026. 1,064 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.