How long did the Mecula fire last?

According to the heat detections seen by satellite inside the perimeter, it burned from 24 August 2026 to 3 September 2026 (11 days). The perimeter dates it from 24 August 2026 to 2 September 2026.

How much area did it burn?

The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,573 hectares (45.7 km²). It is an estimate: official national figures may differ.

Which municipalities burned?

The fire entered 2 municipalities: Mecula (4,543 ha, 0.2 %); Marrupa (65 ha, 0.0 %).

What was the weather like?

During the fire the temperature reached 32.0 °C, humidity dropped to 28 % and gusts hit 42 km/h. The fire danger index (FWI) reached 34, class High.

Where does this data come from?

From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mozambique (geoBoundaries). It is not an official report.

MZ · Mozambique · 2026-08-24 → 2026-09-03

Mecula fire, 24 August 2026 Mecula, Marrupa

Out · last detection 3 Sept 2026, 10:28 UTC

The fire started on 24 August 2026 in Mecula, Mozambique, and satellites saw it burning for 11 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,573 hectares from heat detections, spread across 2 municipalities.

It is the 257th largest in Niassa since 2016 (of 577 with a page). Number 241 in Mozambique in 2026, of 532.

The power measured by the satellite is low (17.5 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Compare with…

Suggestions: Mecula · 2017 Mecula · 2020 Marrupa · 2026 Mecula · 2025

Burnt area: 4,573ha; GWIS perimeter (Copernicus)
Duration: 11days; 24 Aug 2026 – 3 Sept 2026
Municipalities hit: 2; districts
Started on: 24 Aug; 2026
Heat detections: 35; in a single hotspot: 17 MW
Danger at start: 31; High · FWI index
Average daily power: 19MW; detected power per day, on average

HOTSPOTS BY DAY 24 Aug3 Sept

Play back 3 Sept 2026

How it evolved, day by day

24 Aug 26 Aug 28 Aug 29 Aug 31 Aug 2 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high

42km/h · peak gust

28%lowest humidity

It had gone one day without rain (1 mm or more) when it started.

This area had burned before

88% of the perimeter overlaps earlier fires recorded since 2016: 1,149 ha in 2016, 1,807 ha in 2017, 1,002 ha in 2018, 1,226 ha in 2019, 458 ha in 2020, 1,698 ha in 2021, 2,000 ha in 2024, 129 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 4,025 ha that had burned before.

How big is it?

It burned the equivalent of 2.9% of the area of London (46 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

Mecula where it started

4,543 ha reached on 24 Aug

0.2 %
Marrupa

65 ha

0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025

Built-up area< 0.1 ha

Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day	High	Min. humidity	Peak gust	Rain	Danger (FWI)
24 Aug	31.4 °C	30 %	29 km/h	0.0 mm	High 31
25 Aug	31.1 °C	39 %	24 km/h	0.0 mm	High 29
26 Aug	30.6 °C	41 %	30 km/h	0.0 mm	High 29
27 Aug	30.0 °C	39 %	33 km/h	0.0 mm	High 31
28 Aug	30.8 °C	34 %	31 km/h	0.0 mm	High 30
29 Aug	30.5 °C	33 %	42 km/h	0.0 mm	High 34
30 Aug	30.9 °C	40 %	32 km/h	0.1 mm	High 33
31 Aug	31.3 °C	35 %	32 km/h	0.0 mm	High 34
1 Sept	32.0 °C	28 %	35 km/h	0.0 mm	High 34
2 Sept	31.3 °C	29 %	34 km/h	0.0 mm	High 33
3 Sept	31.4 °C	30 %	30 km/h	0.0 mm	High 34
4 Sept after	32.1 °C	34 %	33 km/h	0.0 mm	High 34
5 Sept after	29.9 °C	41 %	32 km/h	0.0 mm	High 32
6 Sept after	31.8 °C	34 %	30 km/h	0.0 mm	High 31
7 Sept after	31.7 °C	34 %	32 km/h	0.0 mm	High 30
8 Sept after	29.1 °C	38 %	37 km/h	0.0 mm	High 34
9 Sept after	28.9 °C	43 %	31 km/h	0.0 mm	High 31
10 Sept after	31.8 °C	37 %	30 km/h	0.1 mm	High 30
11 Sept after	32.7 °C	35 %	31 km/h	0.0 mm	High 32
12 Sept after	32.0 °C	34 %	28 km/h	0.0 mm	High 32
13 Sept after	32.6 °C	33 %	30 km/h	0.0 mm	High 33

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

↔

Before · 17 Aug 2026

After · 10 Sept 2026

Before After

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 24 August 2026 the air beside the fire reached 69 µg/m³ of PM2.5. That day averaged 34: 2.2 times the WHO daily guideline (15).

PM2.5 peak69 µg/m³

Days over the guideline5 days

PM1072 µg/m³

Optical depth1.36

WHO 15

22232425262728293031123456

Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 35Every satellite heat detection, one by one, with time, satellite, power and coordinates.

⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.

Date and time	Satellite	FRP (MW)	Lat	Lon

Other fires nearby

All fires in Mozambique ›

Frequently asked questions

How long did the Mecula fire last?: According to the heat detections seen by satellite inside the perimeter, it burned from 24 August 2026 to 3 September 2026 (11 days). The perimeter dates it from 24 August 2026 to 2 September 2026.
How much area did it burn?: The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,573 hectares (45.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?: The fire entered 2 municipalities: Mecula (4,543 ha, 0.2 %); Marrupa (65 ha, 0.0 %).
What was the weather like?: During the fire the temperature reached 32.0 °C, humidity dropped to 28 % and gusts hit 42 km/h. The fire danger index (FWI) reached 34, class High.
Where does this data come from?: From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mozambique (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

NASA FIRMS ↗
GWIS · Copernicus ↗

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error

What do you think is wrong?

Dates or duration Place or towns Burned area Name It was not a wildfire Same fire as another page Something else

What really happened?

Your connection to the fire (optional) Email (optional)

We will only use your email to reply about this report. Privacy.

How we know this

Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
Dates adjusted with the VIIRS detections inside the perimeter, which said 24 August 2026 to 2 September 2026. 35 Suomi-NPP VIIRS detections on those dates.
We have not matched this page with any official record.
Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.

Where it burned