Mbire fire, 17 September 2019 Hurungwe, Mbire
The fire started on 17 September 2019 in Mbire, Zimbabwe, and satellites saw it burning for 15 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,308 hectares from heat detections, spread across 2 municipalities.
It is the 2th largest in Mashonaland Central since 2016 (of 334 with a page). Number 10 in Zimbabwe in 2019, of 282.
The power measured by the satellite is low (24.3 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.
Compare with…
- Burnt area
- 8,308ha
- GWIS perimeter (Copernicus)
- Duration
- 15days
- 17 Sept 2019 – 1 Oct 2019
- Municipalities hit
- 2
- districts
- Started on
- 17 Sept
- 2019
- Heat detections
- 252
- in a single hotspot: 24 MW
- Danger at start
- 48
- Very high · FWI index
- Average daily power
- 91MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone more than two months without rain (1 mm or more) when it started.
This area had burned before
70% of the perimeter overlaps earlier fires recorded since 2016: 5,764 ha in 2016, 3,060 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 5,855 ha that had burned before.
- 3,785 ha Hurungwe fire, July 2016 6,176 ha in total; the hectares shown are those it shares with this fire
- 1,978 ha Hurungwe fire, September 2016 4,460 ha in total; the hectares shown are those it shares with this fire
- 1,417 ha Hurungwe fire, September 2018 33,869 ha in total; the hectares shown are those it shares with this fire
- 909 ha Hurungwe fire, August 2018 1,206 ha in total; the hectares shown are those it shares with this fire
- 734 ha Hurungwe fire, August 2018 2,703 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
7,054 ha reached on 20 Sept0.4 %
-
Mbire where it started1,272 ha reached on 17 Sept0.3 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2020Inside the perimeter there were about 0.97 hectares of built-up land and about 150 residents (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 17 Sept | 31.1 °C | 28 % | 51 km/h | 0.0 mm | Very high 48 |
| 18 Sept | 31.0 °C | 22 % | 48 km/h | 0.0 mm | Very high 46 |
| 19 Sept | 32.0 °C | 15 % | 49 km/h | 0.0 mm | Extreme 53 |
| 20 Sept | 30.2 °C | 26 % | 50 km/h | 0.0 mm | Very high 49 |
| 21 Sept | 31.7 °C | 26 % | 44 km/h | 0.0 mm | Very high 47 |
| 22 Sept | 33.6 °C | 26 % | 38 km/h | 0.0 mm | Very high 44 |
| 23 Sept | 34.9 °C | 22 % | 35 km/h | 0.0 mm | Very high 42 |
| 24 Sept | 33.7 °C | 26 % | 53 km/h | 0.0 mm | Extreme 53 |
| 25 Sept | 29.8 °C | 30 % | 62 km/h | 0.2 mm | Extreme 54 |
| 26 Sept | 24.7 °C | 29 % | 44 km/h | 0.0 mm | Very high 42 |
| 27 Sept | 26.8 °C | 26 % | 50 km/h | 0.0 mm | Very high 45 |
| 28 Sept | 29.9 °C | 18 % | 35 km/h | 0.0 mm | Very high 42 |
| 29 Sept | 33.5 °C | 15 % | 34 km/h | 0.0 mm | Very high 45 |
| 30 Sept | 36.0 °C | 19 % | 30 km/h | 0.0 mm | Very high 45 |
| 1 Oct | 37.5 °C | 21 % | 23 km/h | 0.0 mm | Very high 41 |
| 2 Oct after | 27.1 °C | 49 % | 53 km/h | 0.4 mm | High 36 |
| 3 Oct after | 25.1 °C | 56 % | 48 km/h | 0.0 mm | High 30 |
| 4 Oct after | 31.3 °C | 38 % | 44 km/h | 0.1 mm | High 34 |
| 5 Oct after | 33.4 °C | 30 % | 42 km/h | 0.0 mm | High 37 |
| 6 Oct after | 33.3 °C | 27 % | 48 km/h | 0.0 mm | Very high 44 |
| 7 Oct after | 34.6 °C | 29 % | 42 km/h | 0.0 mm | Very high 41 |
| 8 Oct after | 36.8 °C | 22 % | 34 km/h | 0.0 mm | Very high 42 |
| 9 Oct after | 37.5 °C | 19 % | 33 km/h | 0.0 mm | Very high 44 |
| 10 Oct after | 35.9 °C | 21 % | 38 km/h | 0.0 mm | Very high 48 |
| 11 Oct after | 31.9 °C | 33 % | 68 km/h | 0.0 mm | Extreme 56 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 252Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Mbire fire last?
- GWIS (Copernicus) dates it between 17 September 2019 and 1 October 2019: 15 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,308 hectares (83.1 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 2 municipalities: Hurungwe (7,054 ha, 0.4 %); Mbire (1,272 ha, 0.3 %).
- What was the weather like?
- During the fire the temperature reached 37.5 °C, humidity dropped to 15 % and gusts hit 62 km/h. The fire danger index (FWI) reached 54, class Extreme.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Zimbabwe (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 252 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.