Skip to content
worldfires
PY · Paraguay · –

Mariscal Estigarribia fire, 12 November 2017 Mariscal Estigarribia

Out · last detection 20 Nov 2017, 18:09 UTC

The fire started on 12 November 2017 in Mariscal Estigarribia, Paraguay, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,660 hectares from heat detections, spread across a single municipality.

It is the 60th largest in Boquerón since 2016 (of 262 with a page). Number 58 in Paraguay in 2017, of 261.

Burnt area
2,660ha
GWIS perimeter (Copernicus)
Duration
9days
12 Nov 2017 – 20 Nov 2017
Municipalities hit
1
districts
Started on
12 Nov
2017
Heat detections
129
in a single hotspot: 54 MW
Danger at start
15
Moderate · FWI index
Average daily power
176MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Nov20 Nov
20 Nov 2017

How it evolved, day by day

12 Nov 2017 · 13 MW · 5 13 Nov 2017 · 249 MW · 8 14 Nov 2017 · 584 MW · 45 15 Nov 2017 · 131 MW · 22 16 Nov 2017 · 26 MW · 15 17 Nov 2017 · 283 MW · 26 18 Nov 2017 · 9 MW · 3 20 Nov 2017 · 108 MW · 5
12 Nov 14 Nov 16 Nov 18 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

41°high
55km/h · peak gust
19%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 3.0 mm on 21 Nov.

This area had burned before

24% of the perimeter overlaps earlier fires recorded since 2016: 627 ha in 2016.

How big is it?

10 km
It burned the equivalent of 1.7% of the area of London (27 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Mariscal Estigarribia where it started
    2,658 ha reached on 12 Nov
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Nov 34.9 °C 24 % 30 km/h 0.0 mm Moderate 15
13 Nov 36.7 °C 24 % 26 km/h 0.0 mm Moderate 17
14 Nov 39.0 °C 19 % 35 km/h 0.0 mm High 27
15 Nov 40.8 °C 21 % 55 km/h 0.0 mm Very high 39
16 Nov 39.1 °C 31 % 52 km/h 14.5 mm High 31
17 Nov 32.8 °C 57 % 49 km/h 9.3 mm Very low 2
18 Nov 32.3 °C 45 % 46 km/h 13.6 mm Very low 1
19 Nov 32.1 °C 36 % 33 km/h 0.0 mm Low 6
20 Nov 35.0 °C 38 % 31 km/h 0.0 mm Moderate 13
21 Nov after 36.3 °C 46 % 45 km/h 3.0 mm Moderate 12

Its twins: fires that started in the same weather

It started with an FWI of 14.7, a minimum humidity of 24% and 1 day without rain. Fires in the area that started in weather like this since 2016: 26.

FWI at the start 14.7
Minimum humidity 24 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Puerto Casado fire, November 2020
18,216 ha 8 days FWI 14.4 Min. humidity 24 % 191 km away, in 2020

First rain (1 mm or more) after it ended: 4.5 mm on 10 Nov.

What happened to them

7 days
median duration
2,018 ha
median area
100 %
went past 1,000 ha
5.8 mm
rain at the end (median; 25 of 26 had it)

It burned an area similar to its twins (2,660 ha against a median of 2,018 ha) and lasted 9 days, against 7 days.

In 1 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

3.0 mmfirst rain
21 Novthe day after it ended
55km/h · max. gust

It was considered over on 20 Nov, and on 21 Nov 3.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 25 of 26, with a median of 5.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Nov 2017
After · 27 Nov 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 129Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Paraguay

Frequently asked questions

How long did the Mariscal Estigarribia fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 12 November 2017 to 20 November 2017 (9 days). The perimeter dates it from 12 November 2017 to 18 November 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,660 hectares (26.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Mariscal Estigarribia (2,658 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 40.8 °C, humidity dropped to 19 % and gusts hit 55 km/h. The fire danger index (FWI) reached 39, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Paraguay (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 26. Their median duration was 7 days and their median area 2,018 ha; 100 % went past 1,000 ha. In 1 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 132 · 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 18 November 2017 → 20 November 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 132 · 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 12 November 2017 to 18 November 2017. 129 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.