Skip to content
worldfires
PY · Paraguay · –

Mariscal Estigarribia fire, 20 August 2017 Mariscal Estigarribia

Out · last detection 29 Aug 2017, 17:24 UTC

The fire started on 20 August 2017 in Mariscal Estigarribia, Paraguay, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 13,813 hectares from heat detections, spread across a single municipality.

It is the 2th largest in Boquerón since 2016 (of 262 with a page). Number 2 in Paraguay in 2017, of 261.

Burnt area
13,813ha
GWIS perimeter (Copernicus)
Duration
10days
20 Aug 2017 – 29 Aug 2017
Municipalities hit
1
districts
Started on
20 Aug
2017
Heat detections
625
in a single hotspot: 331 MW
Danger at start
27
High · FWI index
Average daily power
1.7GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 20 Aug29 Aug
29 Aug 2017

How it evolved, day by day

20 Aug 2017 · 82 MW · 10 21 Aug 2017 · 94 MW · 6 22 Aug 2017 · 690 MW · 14 23 Aug 2017 · 1,940 MW · 102 24 Aug 2017 · 4,366 MW · 101 25 Aug 2017 · 8,069 MW · 302 26 Aug 2017 · 296 MW · 46 27 Aug 2017 · 423 MW · 15 28 Aug 2017 · 433 MW · 18 29 Aug 2017 · 170 MW · 11
20 Aug 22 Aug 25 Aug 28 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
67km/h · peak gust
24%lowest humidity

It had gone 6 days without rain (1 mm or more) when it started. Rain came after the fire: 13.8 mm on 5 Sept.

This area had burned before

31% of the perimeter overlaps earlier fires recorded since 2016: 5,336 ha in 2016. Part of it burned more than once, so the yearly figures add up to more than the 4,299 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 8.7% of the area of London (138 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Mariscal Estigarribia where it started
    14,033 ha reached on 20 Aug
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area0.40 ha
Residents< 20

Inside the perimeter there were about 0.40 hectares of built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 23 % of the area in Paraguay

Day High Min. humidity Peak gust Rain Danger (FWI)
20 Aug 22.6 °C 26 % 54 km/h 0.0 mm High 27
21 Aug 22.8 °C 24 % 36 km/h 0.0 mm High 24
22 Aug 27.3 °C 33 % 43 km/h 0.0 mm High 29
23 Aug 35.2 °C 32 % 59 km/h 0.0 mm Very high 43
24 Aug 36.4 °C 28 % 67 km/h 0.0 mm Very high 48
25 Aug 35.9 °C 33 % 66 km/h 0.0 mm Extreme 51
26 Aug 33.5 °C 46 % 55 km/h 0.3 mm High 36
27 Aug 32.2 °C 52 % 48 km/h 0.8 mm Moderate 12
28 Aug 37.6 °C 29 % 58 km/h 0.0 mm Very high 41
29 Aug 38.4 °C 28 % 51 km/h 0.0 mm Very high 46
30 Aug after 28.3 °C 35 % 56 km/h 0.0 mm High 35
31 Aug after 23.7 °C 38 % 30 km/h 0.0 mm Moderate 16
1 Sept after 35.3 °C 31 % 48 km/h 0.0 mm High 36
2 Sept after 37.8 °C 28 % 59 km/h 0.0 mm Very high 47
3 Sept after 38.3 °C 27 % 65 km/h 0.0 mm Extreme 60
4 Sept after 32.9 °C 39 % 50 km/h 0.5 mm High 25
5 Sept after 17.6 °C 71 % 44 km/h 13.8 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 27.1, a minimum humidity of 26% and 6 days without rain. Fires in the area that started in weather like this since 2016: 26.

FWI at the start 27.1
Minimum humidity 26 %
Days without rain 6
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Bermejo fire, July 2022
2,301 ha 2 days FWI 26.7 Min. humidity 28 % 51 km away, in 2022

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

6 days
median duration
2,062 ha
median area
100 %
went past 1,000 ha
4.8 mm
rain at the end (median; 22 of 26 had it)

It was 6.7 times larger than the median of its twins and lasted 10 days, against 6 days.

None of its 26 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 4 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

13.8 mmfirst rain
5 Sept7 days after it ended
67km/h · max. gust

It was considered over on 29 Aug, and on 5 Sept 13.8 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 22 of 26, with a median of 4.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 13 Aug 2017
After · 5 Sept 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 625Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Paraguay

Frequently asked questions

How long did the Mariscal Estigarribia fire last?
GWIS (Copernicus) dates it between 20 August 2017 and 29 August 2017: 10 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 13,813 hectares (138.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Mariscal Estigarribia (14,033 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 38.4 °C, humidity dropped to 24 % and gusts hit 67 km/h. The fire danger index (FWI) reached 51, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Paraguay (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 26. Their median duration was 6 days and their median area 2,062 ha; 100 % went past 1,000 ha. None of its 26 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 4 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 132 · 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 132 · 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 625 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.