Skip to content
worldfires
AU · Australia · –

Maralinga Tjarutja fire, December 2023 Maralinga Tjarutja

Out · last detection 2 Jan 2024, 04:48 UTC

The fire started on 28 December 2023 in Maralinga Tjarutja, Australia, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,552 hectares from heat detections, spread across a single municipality.

It is the 51th largest in South Australia since 2016 (of 69 with a page). Number 115 in Australia in 2023, of 157.

Compare with…
Burnt area
6,552ha
GWIS perimeter (Copernicus)
Duration
6days
28 Dec 2023 – 2 Jan 2024
Municipalities hit
1
local government areas
Started on
28 Dec
2023
Heat detections
283
in a single hotspot: 152 MW
Danger at start
60
Extreme · FWI index
Average daily power
723MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 28 Dec2 Jan
2 Jan 2024

How it evolved, day by day

28 Dec 2023 · 952 MW · 41 29 Dec 2023 · 1,386 MW · 100 30 Dec 2023 · 952 MW · 127 1 Jan 2024 · 62 MW · 12 2 Jan 2024 · 262 MW · 3
28 Dec 29 Dec 30 Dec 1 Jan 2 Jan

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
58km/h · peak gust
13%lowest humidity

It had gone 16 days without rain (1 mm or more) when it started. Rain came after the fire: 4.6 mm on 5 Jan.

This area had burned before

3% of the perimeter overlaps earlier fires recorded since 2016: 174 ha in 2022.

How big is it?

10 km
It burned the equivalent of 4.1% of the area of London (66 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Maralinga Tjarutja where it started
    6,613 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Strong wind: 39 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
28 Dec 38.6 °C 16 % 58 km/h 0.0 mm Extreme 60
29 Dec 31.4 °C 28 % 56 km/h 0.0 mm Very extreme 74
30 Dec 31.2 °C 16 % 42 km/h 0.0 mm Extreme 61
31 Dec 32.9 °C 16 % 44 km/h 0.0 mm Very high 42
1 Jan 34.1 °C 22 % 45 km/h 0.3 mm Very high 45
2 Jan 40.4 °C 13 % 49 km/h 0.3 mm Very extreme 92
3 Jan after 30.9 °C 36 % 41 km/h 0.1 mm Very high 41
4 Jan after 29.6 °C 41 % 36 km/h 0.3 mm High 26
5 Jan after 28.9 °C 51 % 34 km/h 4.6 mm Low 6

Its twins: fires that started in the same weather

It started with an FWI of 60.2, a minimum humidity of 16% and 16 days without rain. Fires in the area that started in weather like this since 2017: 5.

FWI at the start 60.2
Minimum humidity 16 %
Days without rain 16
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Maralinga Tjarutja fire, December 2021
20,961 ha 6 days FWI 61.7 Min. humidity 17 % 191 km away, in 2021

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

Fires in the area that started in similar weather: 5. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

4.6 mmfirst rain
5 Jan3 days after it ended
58km/h · max. gust

It was considered over on 2 Jan, and on 5 Jan 4.6 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2017.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 21 Dec 2023
After · 9 Jan 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 30 December 2023 the air beside the fire reached 14 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak14 µg/m³
Days over the guideline0 days
PM1021 µg/m³
Optical depth0.33
26 Dec28 Dec30 Dec1 Jan3 Jan
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 283Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Frequently asked questions

How long did the Maralinga Tjarutja fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 28 December 2023 to 2 January 2024 (6 days). The perimeter dates it from 28 December 2023 to 1 January 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,552 hectares (65.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Maralinga Tjarutja (6,613 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 40.4 °C, humidity dropped to 13 % and gusts hit 58 km/h. The fire danger index (FWI) reached 92, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 1 January 2024 → 2 January 2024.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 28 December 2023 to 1 January 2024. 283 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.