Burned area
satellite only11,480ha
Perimeter published by GWIS (Copernicus).
- Source
- GWIS (Copernicus)
- Date
- 23 Jul 2026 – 8 Aug 2026
+− cross-check
No official record is matched to this page to compare it with.
AU · Australia · –
Mapoon fire, 23 July 2026 Cook, Mapoon, Napranum
Out · last detection 8 Aug 2026, 03:30 UTC
The fire started on 23 July 2026 in Mapoon, Australia, and satellites saw it burning for 17 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 11,480 hectares from heat detections, spread across 3 municipalities.
This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.
GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.
The power measured by the satellite is low (20.9 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.
Use this data
Compare with…
Suggestions: Cook · 2023Cook · 2018Cook · 2020Cook · 2019
Use this data
Fire page data · version 2026-10-26matches the official recordwith caveatssatellite onlymodel
When copying, the sentence is
Tick the figures you want: they make up the lede and the CSV.
Duration by satellite
satellite only17days
23 Jul 2026 to 8 Aug 2026: first and last day with fire on the page.
- Source
- GWIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- last detection: 8 Aug 2026, 03:30 UTC
+− cross-check
Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.
Start
satellite only23 Jul 2026
First day with fire seen by the satellites or the perimeter.
- Source
- GWIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- 23 Jul 2026
+− cross-check
No official record is matched to this page, so the alert time and the cause are not known here.
Hotspots
satellite only287
VIIRS detections at 375 m. Most intense hotspot: 21 MW.
- Source
- NASA FIRMS · VIIRS (Suomi NPP + NOAA-20)
- Date
- 23 Jul 2026 – 8 Aug 2026
+− cross-check
There is no official record to compare with. Each hotspot is a pixel detected in one satellite pass, not a separate fire.
The worst day
satellite only489MW
Total radiative power on 25 July 2026; hotspots that day: 74.
- Source
- NASA FIRMS · VIIRS (FRP)
- Date
- 25 Jul 2026
+− cross-check
Fire radiative power (FRP) measures the energy the fire gives off when the satellite passes. Added up by day, it compares intensity, not area.
Danger at the start
model40.4FWI · very high
Fire Weather Index (Canadian system) computed by WorldFires for the day the fire started. Consecutive days without rain before: 60.
- Source
- WorldFires calculation (Canadian FWI system)
- Date
- 23 Jul 2026, local noon
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings
Weather during the fire
model32.2°C · 36% RH
High of 32.2 °C and minimum humidity of 36% on 27 July 2026; gusts of 52 km/h on 2 August 2026.
- Source
- weather model at the fire’s grid cell
- Date
- 23 Jul 2026 – 8 Aug 2026
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
This page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
-
· reconstructed weatherWeather and FWI computed from the ERA5 reanalysis
-
logLast day with fire: 4 August 2026 → 8 August 2026.
What was saved on 26 October 2026
Every night a snapshot of what the page shows is saved. If anything changes, it appears in the list as a log entry.
- Area
- 11,480 ha
- Dates
- 23 Jul 2026 – 8 Aug 2026
- Name
- Cook
- Official record
- —
Versioned permanent link
https://worldfires.org/en/fire/mapoon-2026-07?v=2026-10-26A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
CSV for this fire mapoon-2026-07.csv · daily, no individual hotspots
| fecha | focos_viirs | frp_mw | tmax_c | tmin_c | hr_min_pct | viento_max_kmh | racha_max_kmh | precip_mm | fwi | clase_fwi | dentro_del_incendio |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2026-07-23 | 35 | 69 | 31.3 | 19.5 | 41 | 17.5 | 40 | 0 | 40.4 | muy_alto | 1 |
| 2026-07-24 | 32 | 29 | 30.5 | 19.4 | 41 | 17.9 | 41.8 | 0.1 | 40.7 | muy_alto | 1 |
| 2026-07-25 | 74 | 489 | 30.9 | 19.4 | 35 | 17.3 | 39.2 | 0 | 41.6 | muy_alto | 1 |
| 2026-07-26 | 90 | 451 | 32 | 16.9 | 30 | 13.4 | 34.6 | 0.1 | 38.2 | muy_alto | 1 |
| 2026-07-27 | 16 | 76 | 32.2 | 18.9 | 36 | 11.7 | 34.6 | 0.4 | 32.8 | alto | 1 |
| 2026-07-28 | 3 | 20 | 31.4 | 19.8 | 42 | 14.1 | 31.7 | 0.7 | 35.3 | alto | 1 |
| 2026-07-29 | 0 | 0 | 29.3 | 21.6 | 52 | 19.4 | 44.3 | 0.8 | 30 | alto | 1 |
| 2026-07-30 | 6 | 20 | 32 | 22.4 | 40 | 21 | 45.4 | 0 | 37.8 | alto | 1 |
| 2026-07-31 | 13 | 52 | 31.5 | 19.3 | 33 | 20.5 | 45 | 0 | 42.9 | muy_alto | 1 |
| 2026-08-01 | 0 | 0 | 30.2 | 18.1 | 46 | 22.7 | 46.1 | 0.1 | 46.8 | muy_alto | 1 |
| 2026-08-02 | 0 | 0 | 29.2 | 22.5 | 51 | 26.6 | 52.2 | 0.3 | 47.8 | muy_alto | 1 |
| 2026-08-03 | 10 | 64 | 31.1 | 20.2 | 36 | 23.1 | 49.3 | 0 | 42.4 | muy_alto | 1 |
| 2026-08-04 | 1 | 1 | 28.9 | 20.6 | 45 | 22.4 | 46.1 | 0 | 42.2 | muy_alto | 1 |
| 2026-08-05 | 0 | 0 | 29.2 | 19.3 | 46 | 20.8 | 45.7 | 0 | 40.8 | muy_alto | 1 |
| 2026-08-06 | 0 | 0 | 30.5 | 19.1 | 40 | 21 | 47.2 | 0 | 40.1 | muy_alto | 1 |
| 2026-08-07 | 4 | 29 | 31.8 | 18.1 | 35 | 13.1 | 34.6 | 0 | 30.6 | alto | 1 |
| 2026-08-08 | 3 | 30 | 32.1 | 18.8 | 41 | 18.3 | 38.2 | 0 | 36.6 | alto | 1 |
| 2026-08-09 | 0 | 0 | 32.8 | 19.7 | 39 | 11.7 | 29.2 | 0 | 29.4 | alto | 0 |
| 2026-08-10 | 0 | 0 | 34.1 | 20.4 | 36 | 7.3 | 22.7 | 0 | 26.7 | alto | 0 |
| 2026-08-11 | 0 | 0 | 33.7 | 20.4 | 38 | 9.8 | 25.6 | 0 | 29.6 | alto | 0 |
| 2026-08-12 | 0 | 0 | 33.7 | 20.3 | 36 | 13.1 | 28.8 | 0 | 31.4 | alto | 0 |
| 2026-08-13 | 0 | 0 | 34.3 | 18.3 | 34 | 15.9 | 34.9 | 0 | 32.8 | alto | 0 |
| 2026-08-14 | 0 | 0 | 33 | 20.6 | 37 | 20 | 44.6 | 0 | 42.8 | muy_alto | 0 |
| 2026-08-15 | 0 | 0 | 31.9 | 21.6 | 38 | 18.2 | 42.1 | 0 | 40.8 | muy_alto | 0 |
| 2026-08-16 | 0 | 0 | 29.4 | 20.7 | 42 | 21.2 | 48.2 | 0.1 | 46.3 | muy_alto | 0 |
| 2026-08-17 | 0 | 0 | 31.9 | 20.3 | 30 | 23.1 | 52.9 | 0 | 55.6 | extremo | 0 |
| 2026-08-18 | 0 | 0 | 32.4 | 19 | 30 | 18.6 | 43.6 | 0 | 48.8 | muy_alto | 0 |
It is generated in your browser from this page’s data: one file per fire, aggregated by day and without individual hotspots.
Live widget for your story
It updates itself while the fire is still active and links to this page. Free, with the attribution shown at the bottom.
Sources for this page: GWIS (Copernicus), NASA FIRMS (VIIRS), ERA5 (ECMWF/Copernicus C3S) · Open-Meteo.com (CC BY 4.0). Open-Meteo.com · How we build fire pages: methodology
- Burnt area
- 11,480ha
- GWIS perimeter (Copernicus)
- Duration
- 17days
- 23 Jul 2026 – 8 Aug 2026
- Municipalities hit
- 3
- local government areas
- Started on
- 23 Jul
- 2026
- Heat detections
- 287
- in a single hotspot: 21 MW
- Danger at start
- 40
- Very high · FWI index
- Average daily power
- 111MW
- detected power per day, on average
Where it burned
HOTSPOTS BY DAY
23 Jul8 Aug
8 Aug 2026
How it evolved, day by day
25 Jul
30 Jul
4 Aug
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
32°high
52km/h · peak gust
30%lowest humidity
It had gone more than two months without rain (1 mm or more) when it started.
This area had burned before
100% of the perimeter overlaps earlier fires recorded since 2016: 2,173 ha in 2016, 1,803 ha in 2017, 6,625 ha in 2018, 217 ha in 2019, 2,393 ha in 2020, 4,934 ha in 2021, 492 ha in 2022, 10,775 ha in 2023, 840 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 11,477 ha that had burned before.
- 9,750 ha Cook fire, September 2023 39,189 ha in total; the hectares shown are those it shares with this fire
- 2,115 ha Cook fire, September 2018 47,307 ha in total; the hectares shown are those it shares with this fire
- 1,683 ha Cook fire, July 2020 11,988 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
7,961 ha0.1 %
-
Mapoon where it started3,532 ha6.5 %
-
14 ha0.0 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
Started with 60 days without rain: 8.2 % of the area in Australia
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 23 Jul | 31.3 °C | 41 % | 40 km/h | 0.0 mm | Very high 40 |
| 24 Jul | 30.5 °C | 41 % | 42 km/h | 0.1 mm | Very high 41 |
| 25 Jul | 30.9 °C | 35 % | 39 km/h | 0.0 mm | Very high 42 |
| 26 Jul | 32.0 °C | 30 % | 35 km/h | 0.1 mm | Very high 38 |
| 27 Jul | 32.2 °C | 36 % | 35 km/h | 0.4 mm | High 33 |
| 28 Jul | 31.4 °C | 42 % | 32 km/h | 0.7 mm | High 35 |
| 29 Jul | 29.3 °C | 52 % | 44 km/h | 0.8 mm | High 30 |
| 30 Jul | 32.0 °C | 40 % | 45 km/h | 0.0 mm | High 38 |
| 31 Jul | 31.5 °C | 33 % | 45 km/h | 0.0 mm | Very high 43 |
| 1 Aug | 30.2 °C | 46 % | 46 km/h | 0.1 mm | Very high 47 |
| 2 Aug | 29.2 °C | 51 % | 52 km/h | 0.3 mm | Very high 48 |
| 3 Aug | 31.1 °C | 36 % | 49 km/h | 0.0 mm | Very high 42 |
| 4 Aug | 28.9 °C | 45 % | 46 km/h | 0.0 mm | Very high 42 |
| 5 Aug | 29.2 °C | 46 % | 46 km/h | 0.0 mm | Very high 41 |
| 6 Aug | 30.5 °C | 40 % | 47 km/h | 0.0 mm | Very high 40 |
| 7 Aug | 31.8 °C | 35 % | 35 km/h | 0.0 mm | High 31 |
| 8 Aug | 32.1 °C | 41 % | 38 km/h | 0.0 mm | High 37 |
| 9 Aug after | 32.8 °C | 39 % | 29 km/h | 0.0 mm | High 29 |
| 10 Aug after | 34.1 °C | 36 % | 23 km/h | 0.0 mm | High 27 |
| 11 Aug after | 33.7 °C | 38 % | 26 km/h | 0.0 mm | High 30 |
| 12 Aug after | 33.7 °C | 36 % | 29 km/h | 0.0 mm | High 31 |
| 13 Aug after | 34.3 °C | 34 % | 35 km/h | 0.0 mm | High 33 |
| 14 Aug after | 33.0 °C | 37 % | 45 km/h | 0.0 mm | Very high 43 |
| 15 Aug after | 31.9 °C | 38 % | 42 km/h | 0.0 mm | Very high 41 |
| 16 Aug after | 29.4 °C | 42 % | 48 km/h | 0.1 mm | Very high 46 |
| 17 Aug after | 31.9 °C | 30 % | 53 km/h | 0.0 mm | Extreme 56 |
| 18 Aug after | 32.4 °C | 30 % | 44 km/h | 0.0 mm | Very high 49 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
↔
Before · 16 Jul 2026
After · 15 Aug 2026
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 27 July 2026 the air beside the fire reached 116 µg/m³ of PM2.5. That day averaged 43: 2.9 times the WHO daily guideline (15).
PM2.5 peak116 µg/m³
Days over the guideline7 days
PM10119 µg/m³
Optical depth1.07
WHO 15
15 Jul21 Jul27 Jul2 Aug8 Aug
Good
Fair
Moderate
Poor
Very poor
Extremely poor
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 287Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV
Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 39,189 haCook9 September 2023 · 49 days · 9 km away
- 47,307 haCook20 September 2018 · 52 days · 16 km away
- 13,775 haCook11 November 2019 · 14 days · 27 km away
- 36,776 haCook23 August 2018 · 53 days · 36 km away
- 28,535 haCook16 July 2026 · 16 days · 38 km away
- 18,042 haCook2 November 2024 · 26 days · 39 km away
Frequently asked questions
- How long did the Mapoon fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 23 July 2026 to 8 August 2026 (17 days). The perimeter dates it from 23 July 2026 to 4 August 2026.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 11,480 hectares (114.8 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 3 municipalities: Cook (7,961 ha, 0.1 %); Mapoon (3,532 ha, 6.5 %); Napranum (14 ha, 0.0 %).
- What was the weather like?
- During the fire the temperature reached 32.2 °C, humidity dropped to 30 % and gusts hit 52 km/h. The fire danger index (FWI) reached 48, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 000 · Emergency number and official warnings
Satellite cross-check
History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
- Last day with fire: 4 August 2026 → 8 August 2026.
RSS Changes to this page With cross-checks and a citable version
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 23 July 2026 to 4 August 2026. 287 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Probably a vegetation burn: not counted in the totals.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.