Skip to content
worldfires
MG · Madagascar · –

Manjakandriana fire, October 2019 Moramanga, Manjakandriana

Out · last detection 12 Nov 2019, 10:45 UTC

The fire started on 20 October 2019 in Manjakandriana, Madagascar, and satellites saw it burning for 24 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,384 hectares from heat detections, spread across 2 municipalities.

It is the 10th largest in Analamanga since 2016 (of 18 with a page). Number 27 in Madagascar in 2019, of 38.

Burnt area
2,384ha
GWIS perimeter (Copernicus)
Duration
24days
20 Oct 2019 – 12 Nov 2019
Municipalities hit
2
districts
Started on
20 Oct
2019
Heat detections
122
in a single hotspot: 76 MW
Danger at start
8
Low · FWI index
Average daily power
67MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 20 Oct12 Nov
12 Nov 2019

How it evolved, day by day

20 Oct 2019 · 9 MW · 1 21 Oct 2019 · 165 MW · 6 22 Oct 2019 · 159 MW · 9 23 Oct 2019 · 49 MW · 2 24 Oct 2019 · 47 MW · 7 25 Oct 2019 · 236 MW · 19 26 Oct 2019 · 16 MW · 4 27 Oct 2019 · 48 MW · 4 28 Oct 2019 · 36 MW · 6 29 Oct 2019 · 72 MW · 7 30 Oct 2019 · 136 MW · 16 31 Oct 2019 · 7 MW · 1 1 Nov 2019 · 63 MW · 6 3 Nov 2019 · 3 MW · 1 4 Nov 2019 · 21 MW · 3 5 Nov 2019 · 30 MW · 5 6 Nov 2019 · 164 MW · 5 7 Nov 2019 · 38 MW · 5 8 Nov 2019 · 22 MW · 6 9 Nov 2019 · 20 MW · 4 10 Nov 2019 · 127 MW · 3 12 Nov 2019 · 11 MW · 2
20 Oct 25 Oct 30 Oct 5 Nov 10 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

31°high
44km/h · peak gust
25%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 11.3 mm on 13 Nov.

This area had burned before

84% of the perimeter overlaps earlier fires recorded since 2016: 1,868 ha in 2016, 1,239 ha in 2017, 1,262 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 1,996 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.5% of the area of London (24 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 1,529 ha reached on 21 Oct
    0.2 %
  2. Manjakandriana where it started
    868 ha reached on 20 Oct
    0.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.71 ha
Residents≈ 950

Inside the perimeter there were about 0.71 hectares of built-up land and about 950 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
20 Oct 23.6 °C 46 % 29 km/h 0.0 mm Low 8
21 Oct 26.3 °C 49 % 25 km/h 0.0 mm Low 8
22 Oct 28.4 °C 50 % 26 km/h 6.4 mm Low 9
23 Oct 27.3 °C 51 % 36 km/h 0.0 mm Very low 2
24 Oct 27.5 °C 46 % 32 km/h 0.0 mm Low 8
25 Oct 29.6 °C 32 % 33 km/h 0.0 mm Moderate 18
26 Oct 30.6 °C 25 % 32 km/h 0.0 mm High 24
27 Oct 28.6 °C 37 % 28 km/h 0.0 mm Moderate 21
28 Oct 29.6 °C 37 % 28 km/h 0.0 mm Moderate 19
29 Oct 30.7 °C 32 % 35 km/h 0.0 mm High 23
30 Oct 29.3 °C 34 % 39 km/h 0.0 mm High 28
31 Oct 28.6 °C 42 % 38 km/h 0.2 mm High 27
1 Nov 24.9 °C 50 % 44 km/h 8.3 mm High 24
2 Nov 19.1 °C 73 % 40 km/h 5.1 mm Very low 1
3 Nov 22.0 °C 53 % 34 km/h 0.1 mm Very low 4
4 Nov 24.7 °C 51 % 35 km/h 1.0 mm Low 10
5 Nov 27.7 °C 42 % 34 km/h 0.0 mm Moderate 13
6 Nov 26.0 °C 47 % 32 km/h 0.0 mm Moderate 13
7 Nov 25.2 °C 49 % 38 km/h 0.1 mm Moderate 16
8 Nov 25.2 °C 54 % 32 km/h 0.0 mm Moderate 14
9 Nov 28.4 °C 38 % 38 km/h 0.0 mm Moderate 17
10 Nov 27.2 °C 45 % 35 km/h 0.0 mm Moderate 19
11 Nov 28.5 °C 46 % 28 km/h 0.5 mm Moderate 20
12 Nov 29.4 °C 39 % 32 km/h 0.0 mm Moderate 20
13 Nov after 27.5 °C 49 % 31 km/h 11.3 mm Moderate 20

Its twins: fires that started in the same weather

It started with an FWI of 7.8, a minimum humidity of 46% and 1 day without rain. Fires in the area that started in weather like this since 2016: 21.

FWI at the start 7.8
Minimum humidity 46 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Anosibe-An'ala fire, November 2021
6,146 ha 24 days FWI 9.9 Min. humidity 46 % 57 km away, in 2021

First rain (1 mm or more) after it ended: 9.8 mm on 25 Nov.

What happened to them

14 days
median duration
2,530 ha
median area
100 %
went past 1,000 ha
3.6 mm
rain at the end (median; 21 of 21 had it)

It burned an area similar to its twins (2,384 ha against a median of 2,530 ha) and lasted 24 days, against 14 days.

All of them had rain in the ten days after the end: the first rainy day brought a median of 3.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

11.3 mmfirst rain
13 Novthe day after it ended
44km/h · max. gust

It was considered over on 12 Nov, and on 13 Nov 11.3 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 21 of 21, with a median of 3.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 13 Oct 2019
After · 19 Nov 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 122Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Madagascar

Frequently asked questions

How long did the Manjakandriana fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 20 October 2019 to 12 November 2019 (24 days). The perimeter dates it from 20 October 2019 to 9 November 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,384 hectares (23.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Moramanga (1,529 ha, 0.2 %); Manjakandriana (868 ha, 0.5 %).
What was the weather like?
During the fire the temperature reached 30.7 °C, humidity dropped to 25 % and gusts hit 44 km/h. The fire danger index (FWI) reached 28, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Madagascar (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 21. Their median duration was 14 days and their median area 2,530 ha; 100 % went past 1,000 ha. All of them had rain in the ten days after the end: the first rainy day brought a median of 3.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 9 November 2019 → 12 November 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 20 October 2019 to 9 November 2019. 122 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.