Skip to content
worldfires
RU · Russia · –

Magdagachinsky District fire, 26 April 2018 Magdagachinsky District

Out · last detection 8 May 2018, 03:48 UTC

The fire started on 26 April 2018 in Magdagachinsky District, Russia, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 30,546 hectares from heat detections, spread across a single municipality.

It is the 39th largest in Amur Oblast since 2016 (of 491 with a page). Number 32 in Russia in 2018, of 540.

Burnt area
30,546ha
GWIS perimeter (Copernicus)
Duration
13days
26 Apr 2018 – 8 May 2018
Municipalities hit
1
districts
Started on
26 Apr
2018
Heat detections
1,548
in a single hotspot: 221 MW
Danger at start
19
Moderate · FWI index
Average daily power
2.5GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 26 Apr8 May
8 May 2018

How it evolved, day by day

26 Apr 2018 · 19 MW · 6 27 Apr 2018 · 724 MW · 35 28 Apr 2018 · 30 MW · 20 29 Apr 2018 · 2,548 MW · 254 30 Apr 2018 · 3,019 MW · 215 1 May 2018 · 685 MW · 93 2 May 2018 · 1,417 MW · 99 3 May 2018 · 8,205 MW · 428 4 May 2018 · 9,664 MW · 270 5 May 2018 · 3,240 MW · 125 7 May 2018 · 19 MW · 2 8 May 2018 · 16 MW · 1
26 Apr 29 Apr 4 May

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

23°high
63km/h · peak gust
12%lowest humidity

It had gone 14 days without rain (1 mm or more) when it started. Rain came after the fire: 18.3 mm on 10 May.

This area had burned before

3% of the perimeter overlaps earlier fires recorded since 2016: 993 ha in 2017.

How big is it?

10 km
It burned the equivalent of 19% of the area of London (305 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Magdagachinsky District where it started
    30,509 ha reached on 26 Apr
    1.8 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 10.0 % of the area in Russia

Day High Min. humidity Peak gust Rain Danger (FWI)
26 Apr 8.6 °C 15 % 53 km/h 0.0 mm Moderate 19
27 Apr 15.2 °C 15 % 31 km/h 0.0 mm Moderate 17
28 Apr 18.5 °C 18 % 63 km/h 0.2 mm High 27
29 Apr 12.1 °C 20 % 52 km/h 0.0 mm High 23
30 Apr 11.4 °C 14 % 41 km/h 0.0 mm High 22
1 May 13.6 °C 22 % 32 km/h 0.0 mm Moderate 18
2 May 16.2 °C 14 % 20 km/h 0.0 mm Moderate 20
3 May 20.8 °C 12 % 27 km/h 0.0 mm High 23
4 May 22.7 °C 13 % 26 km/h 0.0 mm High 27
5 May 18.8 °C 24 % 49 km/h 2.0 mm Low 11
6 May 10.1 °C 56 % 44 km/h 5.4 mm Very low 1
7 May 19.2 °C 22 % 21 km/h 0.0 mm Very low 4
8 May 22.8 °C 15 % 28 km/h 0.0 mm Moderate 16
9 May after 25.6 °C 12 % 58 km/h 0.0 mm High 32
10 May after 16.5 °C 40 % 29 km/h 18.3 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 19.4, a minimum humidity of 15% and 14 days without rain. Fires in the area that started in weather like this since 2016: 16.

FWI at the start 19.4
Minimum humidity 15 %
Days without rain 14
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Tyndinsky District fire, May 2024
6,045 ha 9 days FWI 18.9 Min. humidity 15 % 87 km away, in 2024

First rain (1 mm or more) after it ended: 1.6 mm on 26 May.

What happened to them

6 days
median duration
6,818 ha
median area
31 %
went past 10,000 ha
6.6 mm
rain at the end (median; 16 of 16 had it)

It was 4.5 times larger than the median of its twins and lasted 13 days, against 6 days.

Only 1 of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 6.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

18.3 mmfirst rain
10 May2 days after it ended
63km/h · max. gust

It was considered over on 8 May, and on 10 May 18.3 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 16 of 16, with a median of 6.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 19 Apr 2018
After · 15 May 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,548Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Magdagachinsky District fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 26 April 2018 to 8 May 2018 (13 days). The perimeter dates it from 26 April 2018 to 5 May 2018.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 30,546 hectares (305.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Magdagachinsky District (30,509 ha, 1.8 %).
What was the weather like?
During the fire the temperature reached 22.8 °C, humidity dropped to 12 % and gusts hit 63 km/h. The fire danger index (FWI) reached 27, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 16. Their median duration was 6 days and their median area 6,818 ha; 31 % went past 10,000 ha. Only 1 of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 6.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 5 May 2018 → 8 May 2018.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 26 April 2018 to 5 May 2018. 1,548 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.