Skip to content
worldfires
RU · Russia · –

Lyubinsky District fire, 20 April 2021 Tyukalinsky District, Lyubinsky District, Nazyvayevsky District

Out · last detection 23 Apr 2021, 07:43 UTC

The fire started on 20 April 2021 in Lyubinsky District, Russia, and satellites saw it burning for 4 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,253 hectares from heat detections, spread across 3 municipalities.

It is the 138th largest in Omsk Oblast since 2016 (of 148 with a page). Number 539 in Russia in 2021, of 581.

Burnt area
3,253ha
GWIS perimeter (Copernicus)
Duration
4days
20 Apr 2021 – 23 Apr 2021
Municipalities hit
3
districts
Started on
20 Apr
2021
Heat detections
140
in a single hotspot: 78 MW
Danger at start
6
Low · FWI index
Average daily power
542MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 20 Apr23 Apr
23 Apr 2021

How it evolved, day by day

20 Apr 2021 · 10 MW · 2 21 Apr 2021 · 1,017 MW · 56 22 Apr 2021 · 1,115 MW · 81 23 Apr 2021 · 27 MW · 1
20 Apr 21 Apr 22 Apr 23 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

11°high
64km/h · peak gust
23%lowest humidity

It had gone 7 days without rain (1 mm or more) when it started. Rain came after the fire: 3.4 mm on 28 Apr.

This area had burned before

10% of the perimeter overlaps earlier fires recorded since 2016: 283 ha in 2017, 18 ha in 2019, 22 ha in 2020.

How big is it?

10 km
It burned the equivalent of 2.1% of the area of London (33 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 1,352 ha reached on 21 Apr
    0.2 %
  2. Lyubinsky District where it started
    969 ha reached on 20 Apr
    0.3 %
  3. 908 ha reached on 21 Apr
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
17 Apr 9.2 °C 30 % 30 km/h 0.0 mm Low 6
18 Apr 9.9 °C 38 % 64 km/h 0.3 mm Moderate 12
19 Apr -2.2 °C 34 % 42 km/h 0.0 mm Low 7
20 Apr 2.8 °C 28 % 40 km/h 0.0 mm Low 7
21 Apr 7.4 °C 34 % 50 km/h 0.0 mm Low 8
22 Apr 8.0 °C 26 % 28 km/h 0.0 mm Low 6
23 Apr 10.9 °C 23 % 42 km/h 0.0 mm Low 9
24 Apr after 12.3 °C 16 % 41 km/h 0.0 mm Moderate 11
25 Apr after 15.5 °C 16 % 48 km/h 0.0 mm Moderate 16
26 Apr after 15.1 °C 27 % 56 km/h 0.0 mm Moderate 17
27 Apr after 15.1 °C 42 % 46 km/h 0.3 mm Moderate 13
28 Apr after 17.8 °C 28 % 42 km/h 3.4 mm Very low 2

Its twins: fires that started in the same weather

It started with an FWI of 6.3, a minimum humidity of 28% and 7 days without rain. Fires in the area that started in weather like this since 2017: 27.

FWI at the start 6.3
Minimum humidity 28 %
Days without rain 7
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Krutinsky District fire, April 2020
3,061 ha 3 days FWI 7.6 Min. humidity 27 % 96 km away, in 2020

First rain (1 mm or more) after it ended: 7.8 mm on 23 Apr.

What happened to them

6 days
median duration
4,612 ha
median area
15 %
went past 10,000 ha
2.0 mm
rain at the end (median; 24 of 27 had it)

It burned an area similar to its twins (3,253 ha against a median of 4,612 ha) and lasted 4 days, against 6 days.

In 3 of 27, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

3.4 mmfirst rain
28 Apr5 days after it ended
64km/h · max. gust

It was considered over on 23 Apr, and on 28 Apr 3.4 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 24 of 27, with a median of 2.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2017.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 13 Apr 2021
After · 30 Apr 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 140Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Lyubinsky District fire last?
GWIS (Copernicus) dates it between 20 April 2021 and 23 April 2021: 4 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,253 hectares (32.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Tyukalinsky District (1,352 ha, 0.2 %); Lyubinsky District (969 ha, 0.3 %); Nazyvayevsky District (908 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 10.9 °C, humidity dropped to 23 % and gusts hit 64 km/h. The fire danger index (FWI) reached 12, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2017 with a similar FWI, humidity and dry spell: 27. Their median duration was 6 days and their median area 4,612 ha; 15 % went past 10,000 ha. In 3 of 27, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 140 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.