Luchazes fire, 6 September 2021 Luchazes
The fire started on 6 September 2021 in Luchazes, Angola, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,139 hectares from heat detections, spread across a single municipality.
It is the 102th largest in Moxico since 2016 (of 108 with a page). Number 122 in Angola in 2021, of 126.
Compare with…
- Burnt area
- 5,139ha
- GWIS perimeter (Copernicus)
- Duration
- 10days
- 6 Sept 2021 – 15 Sept 2021
- Municipalities hit
- 1
- municipalities
- Started on
- 6 Sept
- 2021
- Heat detections
- 165
- in a single hotspot: 209 MW
- Danger at start
- 51
- Extreme · FWI index
- Average daily power
- 317MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone more than two months without rain (1 mm or more) when it started.
This area had burned before
88% of the perimeter overlaps earlier fires recorded since 2016: 56 ha in 2016, 3,635 ha in 2017, 17 ha in 2018, 2,506 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 4,530 ha that had burned before.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Luchazes where it started5,183 ha reached on 6 Sept0.1 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2020Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 6 Sept | 34.5 °C | 17 % | 43 km/h | 0.0 mm | Extreme 51 |
| 7 Sept | 34.8 °C | 15 % | 32 km/h | 0.0 mm | Very high 45 |
| 8 Sept | 35.3 °C | 15 % | 41 km/h | 0.0 mm | Very high 50 |
| 9 Sept | 34.2 °C | 20 % | 34 km/h | 0.0 mm | Very high 48 |
| 10 Sept | 31.6 °C | 20 % | 53 km/h | 0.0 mm | Extreme 56 |
| 11 Sept | 30.1 °C | 20 % | 45 km/h | 0.0 mm | Extreme 50 |
| 12 Sept | 30.7 °C | 24 % | 36 km/h | 0.0 mm | Very high 43 |
| 13 Sept | 32.0 °C | 19 % | 29 km/h | 0.0 mm | Very high 41 |
| 14 Sept | 33.4 °C | 21 % | 29 km/h | 0.0 mm | Very high 42 |
| 15 Sept | 35.2 °C | 16 % | 34 km/h | 0.0 mm | Very high 45 |
| 16 Sept after | 35.1 °C | 19 % | 23 km/h | 0.0 mm | Very high 42 |
| 17 Sept after | 34.7 °C | 16 % | 29 km/h | 0.0 mm | Very high 43 |
| 18 Sept after | 34.3 °C | 20 % | 50 km/h | 0.0 mm | Extreme 54 |
| 19 Sept after | 32.5 °C | 21 % | 49 km/h | 0.0 mm | Extreme 54 |
| 20 Sept after | 33.7 °C | 21 % | 37 km/h | 0.0 mm | Very high 46 |
| 21 Sept after | 34.5 °C | 14 % | 43 km/h | 0.0 mm | Very high 49 |
| 22 Sept after | 35.0 °C | 13 % | 46 km/h | 0.0 mm | Extreme 55 |
| 23 Sept after | 33.6 °C | 15 % | 40 km/h | 0.0 mm | Extreme 51 |
| 24 Sept after | 34.7 °C | 17 % | 39 km/h | 0.0 mm | Extreme 50 |
| 25 Sept after | 33.3 °C | 16 % | 46 km/h | 0.0 mm | Extreme 55 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 165Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Luchazes fire last?
- GWIS (Copernicus) dates it between 6 September 2021 and 15 September 2021: 10 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,139 hectares (51.4 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Luchazes (5,183 ha, 0.1 %).
- What was the weather like?
- During the fire the temperature reached 35.3 °C, humidity dropped to 15 % and gusts hit 53 km/h. The fire danger index (FWI) reached 56, class Extreme.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Angola (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 165 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.