Skip to content
worldfires
AO · Angola · –

Lucapa fire, 30 June 2024 Lucapa

Out · last detection 11 Jul 2024, 12:23 UTC

The fire started on 30 June 2024 in Lucapa, Angola, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,488 hectares from heat detections, spread across a single municipality.

It is the 226th largest in Lunda Norte since 2016 (of 297 with a page). Number 110 in Angola in 2024, of 135.

Compare with…
Burnt area
5,488ha
GWIS perimeter (Copernicus)
Duration
12days
30 Jun 2024 – 11 Jul 2024
Municipalities hit
1
municipalities
Started on
30 Jun
2024
Heat detections
147
in a single hotspot: 256 MW
Danger at start
44
Very high · FWI index
Average daily power
1.3GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 30 Jun11 Jul
11 Jul 2024

How it evolved, day by day

30 Jun 2024 · 2,006 MW · 26 3 Jul 2024 · 1,805 MW · 49 4 Jul 2024 · 248 MW · 3 5 Jul 2024 · 3,718 MW · 57 8 Jul 2024 · 246 MW · 11 11 Jul 2024 · 8 MW · 1
30 Jun 5 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
41km/h · peak gust
14%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

78% of the perimeter overlaps earlier fires recorded since 2016: 1,851 ha in 2016, 1,779 ha in 2017, 878 ha in 2018, 575 ha in 2019, 1,414 ha in 2020, 1,399 ha in 2021, 20 ha in 2022, 381 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 4,271 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.5% of the area of London (55 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Lucapa where it started
    5,530 ha reached on 30 Jun
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 84 % of the area in Angola

Day High Min. humidity Peak gust Rain Danger (FWI)
30 Jun 30.4 °C 24 % 34 km/h 0.0 mm Very high 44
1 Jul 31.8 °C 22 % 31 km/h 0.0 mm Very high 44
2 Jul 31.3 °C 21 % 33 km/h 0.0 mm Very high 45
3 Jul 30.4 °C 21 % 39 km/h 0.0 mm Very high 47
4 Jul 31.2 °C 20 % 35 km/h 0.0 mm Very high 44
5 Jul 31.2 °C 20 % 37 km/h 0.0 mm Very high 48
6 Jul 31.5 °C 16 % 35 km/h 0.0 mm Very high 47
7 Jul 30.8 °C 19 % 32 km/h 0.0 mm Very high 50
8 Jul 30.6 °C 22 % 21 km/h 0.0 mm Very high 42
9 Jul 31.1 °C 16 % 28 km/h 0.0 mm Very high 47
10 Jul 30.7 °C 14 % 41 km/h 0.0 mm Extreme 62
11 Jul 30.5 °C 14 % 34 km/h 0.0 mm Extreme 57
12 Jul after 31.4 °C 14 % 30 km/h 0.0 mm Extreme 55
13 Jul after 31.8 °C 16 % 23 km/h 0.0 mm Very high 47
14 Jul after 33.1 °C 13 % 35 km/h 0.0 mm Extreme 52
15 Jul after 32.6 °C 13 % 37 km/h 0.0 mm Extreme 53
16 Jul after 31.6 °C 21 % 33 km/h 0.0 mm Very high 48
17 Jul after 32.4 °C 19 % 32 km/h 0.0 mm Very high 50
18 Jul after 31.2 °C 21 % 32 km/h 0.0 mm Extreme 53
19 Jul after 31.7 °C 17 % 30 km/h 0.0 mm Very high 46
20 Jul after 31.8 °C 15 % 31 km/h 0.0 mm Extreme 50
21 Jul after 31.5 °C 22 % 28 km/h 0.0 mm Extreme 51

Its twins: fires that started in the same weather

It started with an FWI of 44.2, a minimum humidity of 24% and more than two months without rain. Fires in the area that started in weather like this since 2016: 38.

FWI at the start 44.2
Minimum humidity 24 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Lucapa fire, July 2020
6,566 ha 11 days FWI 44.2 Min. humidity 25 % 70 km away, in 2020

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

12 days
median duration
6,274 ha
median area
8 %
went past 10,000 ha
12.7 mm
rain at the end (median; 1 of 38 had it)

It burned an area similar to its twins (5,488 ha against a median of 6,274 ha) and lasted 12 days, against 12 days.

In 37 of 38, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 12.7 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
41km/h · max. gust

It was considered over on 11 Jul, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 1 of 38, with a median of 12.7 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 23 Jun 2024
After · 18 Jul 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 8 July 2024 the air beside the fire reached 45 µg/m³ of PM2.5. That day averaged 38: 2.5 times the WHO daily guideline (15).

PM2.5 peak45 µg/m³
Days over the guideline7 days
PM1064 µg/m³
Optical depth0.76
1 Jul3 Jul5 Jul7 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 147Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Angola

Frequently asked questions

How long did the Lucapa fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 30 June 2024 to 11 July 2024 (12 days). The perimeter dates it from 3 July 2024 to 5 July 2024.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,488 hectares (54.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Lucapa (5,530 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 31.8 °C, humidity dropped to 14 % and gusts hit 41 km/h. The fire danger index (FWI) reached 62, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Angola (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 38. Their median duration was 12 days and their median area 6,274 ha; 8 % went past 10,000 ha. In 37 of 38, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 12.7 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 6 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 5 July 2024 → 11 July 2024.
  2. Start date: 3 July 2024 → 30 June 2024.
  3. Last day with fire: 8 July 2024 → 5 July 2024.
  4. Start date: 30 June 2024 → 3 July 2024.
  5. Last day with fire: 5 July 2024 → 8 July 2024.
  6. Start date: 3 July 2024 → 30 June 2024.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 3 July 2024 to 5 July 2024. 147 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.