Skip to content
worldfires
SS · South Sudan · –

Luakpiny/Nasir fire, December 2025 Luakpiny/Nasir

Out · last detection 31 Dec 2025, 10:40 UTC

The fire started on 7 December 2025 in Luakpiny/Nasir, South Sudan, and satellites saw it burning for 25 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 10,546 hectares from heat detections, spread across a single municipality.

Number 89 in South Sudan in 2025, of 235.

GWIS near-real-time perimeter, from the layer that changed in August 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Compare with…
Burnt area
10,546ha
GWIS perimeter (Copernicus)
Duration
25days
7 Dec 2025 – 31 Dec 2025
Municipalities hit
1
counties
Started on
7 Dec
2025
Heat detections
378
in a single hotspot: 61 MW
Danger at start
40
Very high · FWI index
Average daily power
181MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 7 Dec31 Dec
31 Dec 2025

How it evolved, day by day

8 Dec 2025 · 12 MW · 3 9 Dec 2025 · 30 MW · 5 10 Dec 2025 · 255 MW · 36 11 Dec 2025 · 178 MW · 25 12 Dec 2025 · 1,198 MW · 94 13 Dec 2025 · 463 MW · 47 14 Dec 2025 · 275 MW · 23 15 Dec 2025 · 210 MW · 27 16 Dec 2025 · 114 MW · 14 17 Dec 2025 · 112 MW · 12 18 Dec 2025 · 239 MW · 16 19 Dec 2025 · 86 MW · 9 20 Dec 2025 · 39 MW · 7 21 Dec 2025 · 13 MW · 2 22 Dec 2025 · 490 MW · 23 23 Dec 2025 · 75 MW · 10 24 Dec 2025 · 3 MW · 1 25 Dec 2025 · 76 MW · 5 26 Dec 2025 · 29 MW · 6 27 Dec 2025 · 61 MW · 10 29 Dec 2025 · 8 MW · 1 31 Dec 2025 · 15 MW · 2
8 Dec 12 Dec 18 Dec 23 Dec 29 Dec

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (30 passes) and with what wind. Watch the film

The weather it burned in

38°high
44km/h · peak gust
12%lowest humidity

It had gone 32 days without rain (1 mm or more) when it started.

This area had burned before

33% of the perimeter overlaps earlier fires recorded since 2016: 203 ha in 2016, 2,117 ha in 2017, 1,014 ha in 2018, 278 ha in 2024.

How big is it?

10 km
It burned the equivalent of 6.7% of the area of London (105 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Luakpiny/Nasir where it started
    10,619 ha reached on 8 Dec
    2.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
7 Dec 36.2 °C 24 % 20 km/h 0.0 mm Very high 40
8 Dec 36.3 °C 27 % 23 km/h 0.0 mm Very high 45
9 Dec 36.3 °C 23 % 21 km/h 0.0 mm Very high 40
10 Dec 36.4 °C 19 % 40 km/h 0.0 mm Extreme 58
11 Dec 35.9 °C 21 % 37 km/h 0.0 mm Extreme 63
12 Dec 36.5 °C 19 % 40 km/h 0.0 mm Extreme 61
13 Dec 36.0 °C 21 % 37 km/h 0.0 mm Extreme 56
14 Dec 34.6 °C 23 % 22 km/h 0.0 mm Very high 41
15 Dec 35.3 °C 19 % 44 km/h 0.0 mm Extreme 58
16 Dec 34.1 °C 13 % 44 km/h 0.0 mm Extreme 68
17 Dec 34.5 °C 16 % 36 km/h 0.0 mm Extreme 60
18 Dec 33.6 °C 14 % 44 km/h 0.0 mm Very extreme 74
19 Dec 36.2 °C 17 % 38 km/h 0.0 mm Extreme 60
20 Dec 35.4 °C 17 % 33 km/h 0.0 mm Very high 50
21 Dec 35.4 °C 14 % 32 km/h 0.0 mm Extreme 53
22 Dec 35.7 °C 14 % 32 km/h 0.0 mm Extreme 52
23 Dec 36.2 °C 14 % 27 km/h 0.0 mm Very high 50
24 Dec 37.6 °C 17 % 28 km/h 0.0 mm Extreme 58
25 Dec 38.1 °C 16 % 34 km/h 0.0 mm Extreme 65
26 Dec 37.2 °C 16 % 32 km/h 0.0 mm Extreme 63
27 Dec 37.2 °C 19 % 38 km/h 0.0 mm Extreme 69
28 Dec 36.7 °C 17 % 43 km/h 0.0 mm Very extreme 74
29 Dec 36.0 °C 14 % 35 km/h 0.0 mm Extreme 66
30 Dec 34.8 °C 15 % 42 km/h 0.0 mm Very extreme 72
31 Dec 35.7 °C 12 % 35 km/h 0.0 mm Extreme 62
1 Jan after 36.0 °C 13 % 32 km/h 0.0 mm Extreme 59
2 Jan after 36.2 °C 13 % 27 km/h 0.0 mm Extreme 52
3 Jan after 37.6 °C 15 % 32 km/h 0.0 mm Extreme 64
4 Jan after 37.1 °C 16 % 37 km/h 0.0 mm Very extreme 72
5 Jan after 37.1 °C 16 % 41 km/h 0.0 mm Very extreme 77
6 Jan after 38.0 °C 16 % 38 km/h 0.0 mm Extreme 66
7 Jan after 37.6 °C 17 % 33 km/h 0.0 mm Extreme 63
8 Jan after 38.4 °C 14 % 38 km/h 0.0 mm Very extreme 73
9 Jan after 39.0 °C 15 % 39 km/h 0.0 mm Very extreme 75
10 Jan after 37.0 °C 13 % 42 km/h 0.0 mm Very extreme 78

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 30 Nov 2025
After · 7 Jan 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 23 December 2025 the air beside the fire reached 73 µg/m³ of PM2.5. That day averaged 45: 3.0 times the WHO daily guideline (15).

PM2.5 peak73 µg/m³
Days over the guideline23 days
PM1082 µg/m³
Optical depth0.60
5 Dec11 Dec17 Dec23 Dec29 Dec
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 378Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in South Sudan

Frequently asked questions

How long did the Luakpiny/Nasir fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 7 December 2025 to 31 December 2025 (25 days). The perimeter dates it from 7 December 2025 to 27 December 2025.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 10,546 hectares (105.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Luakpiny/Nasir (10,619 ha, 2.0 %).
What was the weather like?
During the fire the temperature reached 38.1 °C, humidity dropped to 12 % and gusts hit 44 km/h. The fire danger index (FWI) reached 74, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of South Sudan (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 27 December 2025 → 31 December 2025.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 7 December 2025 to 27 December 2025. 378 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.