Lofer Fire, August 2020 Apache
The fire started on 18 August 2020 in Apache, United States, and satellites saw it burning for 1 day. United States agencies (MTBS / NIFC) mapped an official burnt perimeter of 618 hectares, spread across a single county.
It is the 306th largest in Arizona since 2016 (of 380 with a page). Number 364 in United States in 2020, of 441.
- Burnt area
- 618ha
- official perimeter (MTBS / NIFC)
- Duration
- 1day
- 18 Aug 2020 – 18 Aug 2020
- Municipalities hit
- 1
- counties
- Started on
- 18 Aug
- 2020
- Heat detections
- 61
- in a single hotspot: 21 MW
- Danger at start
- 6
- Low · FWI index
Where it burned
The weather it burned in
It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 2.3 mm on 9 Sept.
This area had burned before
2% of the perimeter overlaps earlier fires recorded since 2016: 13 ha in 2017.
What happened to each town
-
Apache where it started608 ha reached on 28 Aug0.0 %
Burnt area inside each county, from crossing the official perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 18 Aug | 28.7 °C | 22 % | 43 km/h | 4.3 mm | Low 6 |
| 19 Aug after | 29.3 °C | 21 % | 33 km/h | 0.9 mm | Moderate 18 |
| 20 Aug after | 30.8 °C | 18 % | 37 km/h | 0.3 mm | High 31 |
| 21 Aug after | 27.8 °C | 23 % | 53 km/h | 1.0 mm | High 23 |
| 22 Aug after | 29.3 °C | 24 % | 36 km/h | 2.5 mm | Low 10 |
| 23 Aug after | 28.1 °C | 22 % | 27 km/h | 1.2 mm | Moderate 16 |
| 24 Aug after | 26.9 °C | 24 % | 34 km/h | 0.2 mm | High 25 |
| 25 Aug after | 26.7 °C | 25 % | 25 km/h | 0.5 mm | High 24 |
| 26 Aug after | 27.2 °C | 22 % | 32 km/h | 0.5 mm | High 28 |
| 27 Aug after | 28.0 °C | 24 % | 31 km/h | 0.3 mm | High 27 |
| 28 Aug after | 27.0 °C | 23 % | 38 km/h | 0.0 mm | High 30 |
| 29 Aug after | 25.8 °C | 26 % | 38 km/h | 0.6 mm | High 26 |
| 30 Aug after | 25.6 °C | 23 % | 43 km/h | 0.0 mm | High 30 |
| 31 Aug after | 22.3 °C | 36 % | 50 km/h | 0.9 mm | Moderate 21 |
| 1 Sept after | 20.6 °C | 42 % | 53 km/h | 4.8 mm | Very low 5 |
| 2 Sept after | 26.8 °C | 14 % | 36 km/h | 0.0 mm | Moderate 21 |
| 3 Sept after | 29.3 °C | 14 % | 27 km/h | 0.0 mm | High 30 |
| 4 Sept after | 29.4 °C | 15 % | 30 km/h | 0.0 mm | High 31 |
| 5 Sept after | 28.8 °C | 18 % | 29 km/h | 0.0 mm | High 34 |
| 6 Sept after | 30.5 °C | 9 % | 35 km/h | 0.0 mm | High 36 |
| 7 Sept after | 30.2 °C | 9 % | 45 km/h | 0.0 mm | Very high 43 |
| 8 Sept after | 21.1 °C | 32 % | 77 km/h | 8.6 mm | Low 7 |
| 9 Sept after | 16.0 °C | 31 % | 63 km/h | 2.3 mm | Low 6 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 61Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Lofer fire last?
- It burned between 18 August 2020 and 18 August 2020: 1 day, according to the start date recorded by United States agencies (MTBS / NIFC) and the heat detections seen by satellite.
- How much area did it burn?
- The official perimeter published by United States agencies (MTBS / NIFC) is 618 hectares (6.2 km²). Other tallies, such as daily incident reports, may give slightly different figures.
- Which counties burned?
- The fire only entered Apache (608 ha, 0.0 %).
- What was the weather like?
- During the fire the temperature reached 30.8 °C, humidity dropped to 9 % and gusts hit 77 km/h. The fire danger index (FWI) reached 43, class Very high.
- Where does this data come from?
- From the official burnt perimeter of United States agencies (MTBS / NIFC, public domain), NASA FIRMS VIIRS hotspots and the administrative boundaries of United States. It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 911
- NIFC · National Interagency Fire Center ↗
- InciWeb · Incident Information System ↗
- MTBS · Monitoring Trends in Burn Severity ↗
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter is official and in the public domain. For past years it comes from MTBS (Monitoring Trends in Burn Severity), run by the U.S. Geological Survey and the USDA Forest Service, which map it on Landsat and Sentinel-2 imagery. For the current and last year it comes from WFIGS at the National Interagency Fire Center (NIFC): incident perimeters mapped by fire crews, aircraft and imagery. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. County boundaries come from geoBoundaries ADM2 (Public Domain). The area per county is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.