Linko fire, 7 February 2026 Linko
The fire started on 7 February 2026 in Linko, Guinea, and satellites saw it burning for 7 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,644 hectares from heat detections, spread across a single municipality.
It is the 202th largest in Kankan since 2016 (of 388 with a page). Number 148 in Guinea in 2026, of 269.
The power measured by the satellite is low (28.1 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.
Compare with…
Suggestions: Linko · 2020Linko · 2021Linko · 2019Linko · 2022
- Burnt area
- 2,644ha
- GWIS perimeter (Copernicus)
- Duration
- 7days
- 7 Feb 2026 – 13 Feb 2026
- Municipalities hit
- 1
- sub-prefectures
- Started on
- 7 Feb
- 2026
- Heat detections
- 64
- in a single hotspot: 28 MW
- Danger at start
- 38
- High · FWI index
- Average daily power
- 56MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 31 days without rain (1 mm or more) when it started.
This area had burned before
95% of the perimeter overlaps earlier fires recorded since 2016: 843 ha in 2016, 655 ha in 2017, 377 ha in 2018, 1,267 ha in 2019, 1,676 ha in 2020, 1,092 ha in 2021, 452 ha in 2022, 346 ha in 2023, 501 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 2,507 ha that had burned before.
- 1,361 ha Linko fire, February 2020 3,597 ha in total; the hectares shown are those it shares with this fire
- 1,092 ha Linko fire, February 2021 2,876 ha in total; the hectares shown are those it shares with this fire
- 900 ha Linko fire, February 2019 2,874 ha in total; the hectares shown are those it shares with this fire
- 452 ha Linko fire, March 2022 3,071 ha in total; the hectares shown are those it shares with this fire
- 377 ha Linko fire, January 2018 3,283 ha in total; the hectares shown are those it shares with this fire
- 345 ha Linko fire, March 2019 3,199 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Linko where it started2,662 ha reached on 7 Feb1.7 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 7 Feb | 35.8 °C | 13 % | 30 km/h | 0.0 mm | High 38 |
| 8 Feb | 36.2 °C | 12 % | 24 km/h | 0.0 mm | Very high 40 |
| 9 Feb | 34.8 °C | 15 % | 27 km/h | 0.0 mm | Very high 40 |
| 10 Feb | 35.1 °C | 17 % | 24 km/h | 0.0 mm | Very high 40 |
| 11 Feb | 34.8 °C | 21 % | 19 km/h | 0.0 mm | High 38 |
| 12 Feb | 36.4 °C | 16 % | 27 km/h | 0.0 mm | Very high 40 |
| 13 Feb | 35.8 °C | 18 % | 26 km/h | 0.0 mm | Very high 41 |
| 14 Feb after | 34.7 °C | 23 % | 28 km/h | 0.0 mm | Very high 40 |
| 15 Feb after | 34.9 °C | 25 % | 23 km/h | 0.0 mm | High 37 |
| 16 Feb after | 34.7 °C | 16 % | 38 km/h | 0.0 mm | Very high 42 |
| 17 Feb after | 34.7 °C | 12 % | 28 km/h | 0.0 mm | Very high 42 |
| 18 Feb after | 35.1 °C | 11 % | 23 km/h | 0.0 mm | Very high 43 |
| 19 Feb after | 34.4 °C | 12 % | 31 km/h | 0.0 mm | Very high 44 |
| 20 Feb after | 36.2 °C | 11 % | 37 km/h | 0.0 mm | Very high 46 |
| 21 Feb after | 35.9 °C | 11 % | 29 km/h | 0.0 mm | Very high 45 |
| 22 Feb after | 36.0 °C | 11 % | 32 km/h | 0.0 mm | Very high 47 |
| 23 Feb after | 35.6 °C | 12 % | 23 km/h | 0.0 mm | Very high 44 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 11 February 2026 the air beside the fire reached 70 µg/m³ of PM2.5. That day averaged 41: 2.7 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 64Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 6,385 haLinko25 January 2026 · 8 days · 9 km away
- 6,872 haKomodouFebruary 2026 · 19 days · 26 km away
- 12,507 haKerouane Ctre7 February 2026 · 15 days · 32 km away
- 12,219 haKerouane Ctre23 January 2016 · 11 days · 34 km away
- 9,157 haKerouane CtreJanuary 2020 · 18 days · 34 km away
- 9,760 haKarala23 January 2026 · 10 days · 39 km away
Frequently asked questions
- How long did the Linko fire last?
- GWIS (Copernicus) dates it between 7 February 2026 and 13 February 2026: 7 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,644 hectares (26.4 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Linko (2,662 ha, 1.7 %).
- What was the weather like?
- During the fire the temperature reached 36.4 °C, humidity dropped to 12 % and gusts hit 30 km/h. The fire danger index (FWI) reached 41, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Guinea (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 64 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.