Skip to content
worldfires
ZA · South Africa · –

Lepele-Nkumpi fire, 27 August 2022 Mogalakwena, Lepele-Nkumpi

Out · last detection

The fire started on in Lepele-Nkumpi, South Africa, and satellites saw it burning for 3 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,560 hectares from heat detections, spread across 2 municipalities.

It is number 104 by size of the 161 fires with a page that started in Limpopo since 2016. Number 88 in South Africa in 2022, of 143.

Burnt area
2,560ha
GWIS perimeter (Copernicus)
Duration
3days
27 Aug 2022 – 29 Aug 2022
Municipalities hit
2
municipalities
Started on
27 Aug
2022
Heat detections
142
in a single hotspot: 162 MW
Danger at start
44
Very high · FWI index
Average daily power
474MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 27 Aug29 Aug
29 Aug 2022

How it evolved, day by day

27 Aug 2022 · 291 MW · 51 28 Aug 2022 · 726 MW · 42 29 Aug 2022 · 406 MW · 49
27 Aug 28 Aug 29 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

30°high
27km/h · peak gust
12%lowest humidity

It had gone 36 days without rain (1 mm or more) when it started.

This area had burned before

0% of the perimeter overlaps earlier fires recorded since 2016: 7 ha in 2018, 1 ha in 2021. Part of it burned more than once, so the yearly figures add up to more than the 7 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.6% of the area of London (26 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 1,782 ha reached on 27 Aug
    0.3 %
  2. Lepele-Nkumpi where it started
    796 ha reached on 27 Aug
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.23 ha
Residents< 20

Inside the perimeter there were about 0.23 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Very dry air: 37 % of the area in South Africa

Day High Min. humidity Peak gust Rain Danger (FWI)
27 Aug 28.6 °C 12 % 26 km/h 0.0 mm Very high 44
28 Aug 29.2 °C 18 % 27 km/h 0.0 mm Very high 50
29 Aug 30.2 °C 14 % 22 km/h 0.0 mm Very high 44
30 Aug after 23.4 °C 32 % 47 km/h 0.0 mm Very high 46
31 Aug after 20.3 °C 38 % 34 km/h 0.0 mm High 35
1 Sept after 22.8 °C 14 % 24 km/h 0.0 mm High 36
2 Sept after 25.2 °C 11 % 21 km/h 0.0 mm High 37
3 Sept after 29.9 °C 6 % 24 km/h 0.0 mm Very high 49
4 Sept after 30.6 °C 7 % 22 km/h 0.0 mm Very high 45
5 Sept after 32.7 °C 5 % 30 km/h 0.0 mm Extreme 59
6 Sept after 28.4 °C 20 % 40 km/h 0.0 mm Extreme 56
7 Sept after 24.2 °C 36 % 31 km/h 0.0 mm Very high 42
8 Sept after 27.7 °C 20 % 20 km/h 0.0 mm High 32

Its twins: fires that started in the same weather

It started with an FWI of 43.8, a minimum humidity of 12% and 36 days without rain. Fires in the area that started in weather like this since 2016: 22.

FWI at the start 43.8
Minimum humidity 12 %
Days without rain 36
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Mogalakwena fire, June 2023
2,650 ha 6 days FWI 41.5 Min. humidity 13 % 31 km away, in 2023

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

4 days
median duration
3,026 ha
median area
100 %
went past 1,000 ha
4.3 mm
rain at the end (median; 13 of 22 had it)

It burned an area similar to its twins (2,560 ha against a median of 3,026 ha) and lasted 3 days, against 4 days.

In 9 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
27km/h · max. gust

It was considered over on 29 Aug, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 13 of 22, with a median of 4.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 20 Aug 2022
After · 5 Sept 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 29 August 2022 the air beside the fire reached 49 µg/m³ of PM2.5. That day averaged 28: 1.9 times the WHO daily guideline (15).

PM2.5 peak49 µg/m³
Days over the guideline4 days
PM1071 µg/m³
Optical depth0.46
25 Aug27 Aug29 Aug31 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 142Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in South Africa

Frequently asked questions

How long did the Lepele-Nkumpi fire last?
GWIS (Copernicus) dates it between 27 August 2022 and 29 August 2022: 3 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,560 hectares (25.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Mogalakwena (1,782 ha, 0.3 %); Lepele-Nkumpi (796 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 30.2 °C, humidity dropped to 12 % and gusts hit 27 km/h. The fire danger index (FWI) reached 50, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of South Africa (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 22. Their median duration was 4 days and their median area 3,026 ha; 100 % went past 1,000 ha. In 9 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 10177 · 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 10177 · 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 142 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.