Skip to content
worldfires
TD · Chad · –

La Pendé fire, December 2016 La Pendé, Mandoul Oriental, Tandjilé Est

Out · last detection 10 Jan 2017, 11:20 UTC

The fire started on 23 December 2016 in La Pendé, Chad, and satellites saw it burning for 19 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,843 hectares from heat detections, spread across 3 municipalities.

It is the 6th largest in Logone Oriental since 2016 (of 41 with a page). Number 20 in Chad in 2016, of 220.

Burnt area
5,843ha
GWIS perimeter (Copernicus)
Duration
19days
23 Dec 2016 – 10 Jan 2017
Municipalities hit
3
departments
Started on
23 Dec
2016
Heat detections
177
in a single hotspot: 64 MW
Danger at start
63
Extreme · FWI index
Average daily power
86MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 23 Dec10 Jan
10 Jan 2017

How it evolved, day by day

25 Dec 2016 · 7 MW · 1 27 Dec 2016 · 33 MW · 3 28 Dec 2016 · 25 MW · 8 29 Dec 2016 · 28 MW · 7 30 Dec 2016 · 64 MW · 6 31 Dec 2016 · 104 MW · 41 1 Jan 2017 · 134 MW · 18 2 Jan 2017 · 674 MW · 51 3 Jan 2017 · 37 MW · 11 4 Jan 2017 · 68 MW · 15 5 Jan 2017 · 6 MW · 1 7 Jan 2017 · 40 MW · 6 8 Jan 2017 · 2 MW · 2 9 Jan 2017 · 33 MW · 2 10 Jan 2017 · 43 MW · 5
25 Dec 29 Dec 2 Jan 8 Jan

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
34km/h · peak gust
13%lowest humidity

It had gone 54 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 3.7% of the area of London (58 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. La Pendé where it started
    3,843 ha
    1.5 %
  2. 1,290 ha
    0.2 %
  3. 748 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
23 Dec 36.4 °C 19 % 28 km/h 0.0 mm Extreme 63
24 Dec 36.4 °C 13 % 34 km/h 0.0 mm Extreme 66
25 Dec 32.3 °C 16 % 30 km/h 0.0 mm Extreme 57
26 Dec 29.9 °C 18 % 29 km/h 0.0 mm Extreme 56
27 Dec 31.2 °C 17 % 30 km/h 0.0 mm Extreme 58
28 Dec 32.5 °C 18 % 27 km/h 0.0 mm Extreme 53
29 Dec 32.8 °C 18 % 23 km/h 0.0 mm Very high 50
30 Dec 34.2 °C 16 % 25 km/h 0.0 mm Extreme 52
31 Dec 33.3 °C 18 % 26 km/h 0.0 mm Extreme 51
1 Jan 33.2 °C 18 % 31 km/h 0.0 mm Extreme 58
2 Jan 33.8 °C 20 % 27 km/h 0.0 mm Extreme 52
3 Jan 34.3 °C 18 % 29 km/h 0.0 mm Extreme 58
4 Jan 34.8 °C 16 % 30 km/h 0.0 mm Extreme 60
5 Jan 34.8 °C 15 % 24 km/h 0.0 mm Very high 50
6 Jan 35.9 °C 13 % 31 km/h 0.0 mm Extreme 66
7 Jan 35.8 °C 15 % 29 km/h 0.0 mm Extreme 60
8 Jan 34.8 °C 15 % 31 km/h 0.0 mm Extreme 59
9 Jan 32.1 °C 15 % 32 km/h 0.0 mm Extreme 52
10 Jan 32.0 °C 16 % 29 km/h 0.0 mm Extreme 60
11 Jan after 33.7 °C 15 % 20 km/h 0.0 mm Very high 50
12 Jan after 35.9 °C 12 % 34 km/h 0.0 mm Very extreme 74
13 Jan after 36.3 °C 15 % 30 km/h 0.0 mm Extreme 58
14 Jan after 33.8 °C 14 % 37 km/h 0.0 mm Very extreme 75
15 Jan after 34.5 °C 12 % 31 km/h 0.0 mm Extreme 60
16 Jan after 36.0 °C 11 % 30 km/h 0.0 mm Extreme 65
17 Jan after 37.7 °C 11 % 30 km/h 0.0 mm Extreme 60
18 Jan after 37.6 °C 13 % 29 km/h 0.0 mm Extreme 65
19 Jan after 38.5 °C 12 % 28 km/h 0.0 mm Extreme 62
20 Jan after 37.7 °C 12 % 31 km/h 0.0 mm Extreme 66

Its twins: fires that started in the same weather

It started with an FWI of 63.0, a minimum humidity of 19% and 54 days without rain. Fires in the area that started in weather like this since 2016: 58.

FWI at the start 63.0
Minimum humidity 19 %
Days without rain 54
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Mandoul Oriental fire, January 2022
2,652 ha 15 days FWI 63.9 Min. humidity 17 % 59 km away, in 2022

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

10 days
median duration
2,772 ha
median area
100 %
went past 1,000 ha
—
rain at the end (median; 0 of 58 had it)

It was 2.1 times larger than the median of its twins and lasted 19 days, against 10 days.

Only 8 of its 58 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
34km/h · max. gust

It was considered over on 10 Jan, and not even 1 mm fell in the following ten days: it went out without rain. None of its 58 twins had rain when they ended.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 16 Dec 2016
After · 17 Jan 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 177Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Chad

Frequently asked questions

How long did the La Pendé fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 23 December 2016 to 10 January 2017 (19 days). The perimeter dates it from 28 December 2016 to 4 January 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,843 hectares (58.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: La Pendé (3,843 ha, 1.5 %); Mandoul Oriental (1,290 ha, 0.2 %); Tandjilé Est (748 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 36.4 °C, humidity dropped to 13 % and gusts hit 34 km/h. The fire danger index (FWI) reached 66, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Chad (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 58. Their median duration was 10 days and their median area 2,772 ha; 100 % went past 1,000 ha. Only 8 of its 58 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 3 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Name: Tandjilé Est → La Pendé.
  2. Last day with fire: 4 January 2017 → 10 January 2017.
  3. Start date: 28 December 2016 → 23 December 2016.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 28 December 2016 to 4 January 2017. 177 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.