Skip to content
worldfires
RU · Russia · →

Kyshtovsky District fire, 2 May 2023 Kyshtovsky District

Out · last detection 11 May 2023, 07:21 UTC

The fire started on 2 May 2023 in Kyshtovsky District, Russia, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,345 hectares from heat detections, spread across a single municipality.

It is the 91th largest in Novosibirsk Oblast since 2016 (of 161 with a page). Number 276 in Russia in 2023, of 450.

The power measured by the satellite is low (28.3 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Compare with…
Burnt area
4,345ha
GWIS perimeter (Copernicus)
Duration
10days
2 May 2023 – 11 May 2023
Municipalities hit
1
districts
Started on
2 May
2023
Heat detections
238
in a single hotspot: 28 MW
Danger at start
8
Low · FWI index
Average daily power
125MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 2 May11 May
11 May 2023

How it evolved, day by day

2 May 2023 · 77 MW · 12 3 May 2023 · 62 MW · 8 4 May 2023 · 124 MW · 46 5 May 2023 · 352 MW · 65 6 May 2023 · 314 MW · 49 7 May 2023 · 107 MW · 17 8 May 2023 · 73 MW · 15 9 May 2023 · 71 MW · 15 10 May 2023 · 38 MW · 6 11 May 2023 · 37 MW · 5
2 May 4 May 5 May 6 May 8 May 10 May

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

27°high
66km/h · peak gust
14%lowest humidity

It had gone one day without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 2.7% of the area of London (43 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Kyshtovsky District where it started
    4,328 ha reached on 2 May
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
26 Apr 20.6 °C 30 % 40 km/h 0.3 mm Low 8
27 Apr 21.3 °C 31 % 39 km/h 0.0 mm Low 10
28 Apr 23.1 °C 26 % 66 km/h 0.2 mm Moderate 18
29 Apr 9.4 °C 23 % 50 km/h 0.0 mm Moderate 14
30 Apr 2.8 °C 49 % 49 km/h 0.2 mm Low 10
1 May 1.9 °C 51 % 43 km/h 0.0 mm Low 8
2 May 10.1 °C 31 % 29 km/h 0.0 mm Low 7
3 May 15.0 °C 24 % 18 km/h 0.0 mm Low 8
4 May 20.7 °C 19 % 42 km/h 0.0 mm Moderate 16
5 May 23.8 °C 18 % 42 km/h 0.0 mm Moderate 19
6 May 25.5 °C 15 % 26 km/h 0.0 mm Moderate 18
7 May 26.6 °C 14 % 30 km/h 0.0 mm Moderate 21
8 May 23.5 °C 23 % 45 km/h 0.0 mm High 26
9 May 11.1 °C 28 % 46 km/h 0.0 mm Moderate 21
10 May 12.6 °C 25 % 18 km/h 0.0 mm Moderate 16
11 May 15.5 °C 24 % 31 km/h 0.0 mm Moderate 21
12 May after 9.5 °C 30 % 34 km/h 0.0 mm Moderate 18
13 May after 11.4 °C 28 % 30 km/h 0.0 mm Moderate 16
14 May after 14.1 °C 21 % 34 km/h 0.0 mm Moderate 17
15 May after 13.3 °C 25 % 35 km/h 0.0 mm Moderate 18
16 May after 16.4 °C 36 % 54 km/h 0.3 mm High 24
17 May after 7.5 °C 39 % 37 km/h 0.0 mm Moderate 16
18 May after 14.2 °C 30 % 24 km/h 0.0 mm Moderate 15
19 May after 19.6 °C 26 % 26 km/h 0.0 mm Moderate 16
20 May after 21.6 °C 23 % 33 km/h 0.0 mm Moderate 21
21 May after 23.0 °C 25 % 29 km/h 0.0 mm Moderate 20

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 25 Apr 2023
After · 18 May 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 6 May 2023 the air beside the fire reached 89 µg/m³ of PM2.5. That day averaged 67: 4.5 times the WHO daily guideline (15).

PM2.5 peak89 µg/m³
Days over the guideline9 days
PM10128 µg/m³
Optical depth1.11
301234567891011121314
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 238Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia ›

Frequently asked questions

How long did the Kyshtovsky District fire last?
GWIS (Copernicus) dates it between 2 May 2023 and 11 May 2023: 10 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,345 hectares (43.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Kyshtovsky District (4,328 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 26.6 °C, humidity dropped to 14 % and gusts hit 66 km/h. The fire danger index (FWI) reached 26, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings ›

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 238 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.