Konawe fire, 14 October 2026 Konawe
The fire started on 14 October 2026 in Konawe, Indonesia, and satellites saw it burning for 18 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,508 hectares from heat detections, spread across a single municipality.
It is the 10th largest in Southeast Sulawesi since 2016 (of 10 with a page). Number 1010 in Indonesia in 2026, of 1024.
Compare with…
Is it still active?
No detections since 31 Oct 2026, 17:02 UTC. That usually means no flame is visible from space any more, although hotspots may remain. Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.
- Burnt area
- 1,508ha
- GWIS perimeter (Copernicus)
- Duration
- 18days
- 14 Oct 2026 – 31 Oct 2026
- Municipalities hit
- 1
- regencies
- Started on
- 14 Oct
- 2026
- Heat detections
- 83
- in a single hotspot: 30 MW
- Danger at start
- 11
- Low · FWI index
- Average daily power
- 39MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 2 days without rain (1 mm or more) when it started. Rain came after the fire: 1.7 mm on 1 Nov.
This area had burned before
3% of the perimeter overlaps earlier fires recorded since 2016: 41 ha in 2019.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Jakarta boundary: geoBoundaries · Badan Pusat Statistik (BPS - Statistics Indonesia), World Food Programme, OCHA ROAP (CC BY 3.0 IGO).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Konawe where it started1,518 ha reached on 19 Oct0.3 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 14 Oct | 31.2 °C | 41 % | 27 km/h | 1.1 mm | Low 11 |
| 15 Oct | 32.1 °C | 32 % | 26 km/h | 0.2 mm | Moderate 16 |
| 16 Oct | 31.8 °C | 29 % | 31 km/h | 0.0 mm | Moderate 18 |
| 17 Oct | 30.4 °C | 45 % | 35 km/h | 0.8 mm | Moderate 15 |
| 18 Oct | 32.0 °C | 38 % | 22 km/h | 0.6 mm | Moderate 15 |
| 19 Oct | 33.3 °C | 26 % | 20 km/h | 0.1 mm | Moderate 21 |
| 20 Oct | 33.3 °C | 23 % | 24 km/h | 0.0 mm | High 24 |
| 21 Oct | 31.5 °C | 28 % | 24 km/h | 1.4 mm | Moderate 15 |
| 22 Oct | 31.3 °C | 41 % | 31 km/h | 2.3 mm | Low 9 |
| 23 Oct | 31.0 °C | 46 % | 23 km/h | 5.8 mm | Very low 3 |
| 24 Oct | 31.6 °C | 40 % | 25 km/h | 0.9 mm | Low 8 |
| 25 Oct | 31.4 °C | 44 % | 31 km/h | 1.2 mm | Low 10 |
| 26 Oct | 31.3 °C | 53 % | 24 km/h | 3.4 mm | Very low 3 |
| 27 Oct | 31.3 °C | 45 % | 23 km/h | 3.1 mm | Very low 3 |
| 28 Oct | 32.1 °C | 35 % | 22 km/h | 0.5 mm | Low 11 |
| 29 Oct | 32.5 °C | 33 % | 30 km/h | 0.0 mm | Moderate 17 |
| 30 Oct | 32.0 °C | 35 % | 28 km/h | 1.0 mm | Moderate 14 |
| 31 Oct | 30.6 °C | 47 % | 28 km/h | 13.5 mm | Very low 1 |
| 1 Nov after | 31.3 °C | 42 % | 25 km/h | 1.7 mm | Very low 3 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 25 October 2026 the air beside the fire reached 125 µg/m³ of PM2.5. That day averaged 98: 6.6 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 83Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 1,579 haLuwu Timur7 September 2026 · 17 days · 10 km away
- 14,993 haLuwu Timur 23 September 2026 · 40 days · 12 km away
- 2,494 haLuwu TimurOctober 2019 · 3 days · 16 km away
- 2,054 haKonawe 6 October 2026 · 25 days · 24 km away
- 1,961 haLuwu TimurSeptember 2019 · 13 days · 36 km away
- 10,615 haLuwu Timur 8 September 2026 · 54 days · 40 km away
Frequently asked questions
- How long did the Konawe fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 14 October 2026 to 31 October 2026 (18 days). The perimeter dates it from 19 October 2026 to 30 October 2026.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,508 hectares (15.1 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Konawe (1,518 ha, 0.3 %).
- Is the Konawe fire still active?
- No fire detections since 31 Oct 2026, 17:02 UTC. A lack of detections is not an official extinction.
- What was the weather like?
- During the fire the temperature reached 33.3 °C, humidity dropped to 23 % and gusts hit 35 km/h. The fire danger index (FWI) reached 24, class High.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Indonesia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 112 · Emergency number and official warnings ›
Satellite cross-check
History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 31 October 2026.
- Page published (1,508 ha).
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 19 October 2026 to 30 October 2026. 83 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.