Kokofata fire, 23 February 2026 Kokofata
The fire started on 23 February 2026 in Kokofata, Mali, and satellites saw it burning for 5 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,197 hectares from heat detections, spread across a single municipality.
It is the 106th largest in Kayes since 2016 (of 362 with a page). Number 59 in Mali in 2026, of 165.
Compare with…
- Burnt area
- 3,197ha
- GWIS perimeter (Copernicus)
- Duration
- 5days
- 23 Feb 2026 – 27 Feb 2026
- Municipalities hit
- 1
- communes
- Started on
- 23 Feb
- 2026
- Heat detections
- 101
- in a single hotspot: 62 MW
- Danger at start
- 53
- Extreme · FWI index
- Average daily power
- 371MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone more than two months without rain (1 mm or more) when it started.
This area had burned before
95% of the perimeter overlaps earlier fires recorded since 2016: 1,507 ha in 2017, 38 ha in 2018, 1,419 ha in 2019, 646 ha in 2020, 2,361 ha in 2021, 1,145 ha in 2022, 117 ha in 2024, 135 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 3,040 ha that had burned before.
- 1,419 ha Kokofata fire, May 2019 2,829 ha in total; the hectares shown are those it shares with this fire
- 1,334 ha Kokofata fire, April 2021 2,035 ha in total; the hectares shown are those it shares with this fire
- 135 ha Kokofata fire, January 2025 3,740 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Kokofata where it started3,215 ha reached on 25 Feb1.8 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2025Inside the perimeter there were about 0.78 hectares of built-up land and about 100 residents (GHSL 2025, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 25 Feb | 38.3 °C | 12 % | 28 km/h | 0.0 mm | Extreme 53 |
| 26 Feb | 37.8 °C | 16 % | 31 km/h | 0.0 mm | Extreme 54 |
| 27 Feb | 37.2 °C | 16 % | 34 km/h | 0.0 mm | Extreme 55 |
| 28 Feb after | 32.5 °C | 16 % | 32 km/h | 0.0 mm | Very high 50 |
| 1 Mar after | 32.4 °C | 17 % | 23 km/h | 0.0 mm | Very high 45 |
| 2 Mar after | 32.9 °C | 20 % | 28 km/h | 0.0 mm | Very high 47 |
| 3 Mar after | 35.0 °C | 22 % | 27 km/h | 0.0 mm | Very high 45 |
| 4 Mar after | 35.6 °C | 19 % | 27 km/h | 0.0 mm | Very high 44 |
| 5 Mar after | 37.0 °C | 17 % | 30 km/h | 0.0 mm | Very high 46 |
| 6 Mar after | 37.9 °C | 16 % | 26 km/h | 0.0 mm | Very high 46 |
| 7 Mar after | 38.0 °C | 19 % | 25 km/h | 0.0 mm | Very high 45 |
| 8 Mar after | 38.6 °C | 25 % | 22 km/h | 0.0 mm | Very high 42 |
| 9 Mar after | 39.8 °C | 16 % | 26 km/h | 0.0 mm | Very high 46 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 25 February 2026 the air beside the fire reached 69 µg/m³ of PM2.5. That day averaged 52: 3.5 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 101Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 3,740 haKokofataJanuary 2025 · 5 days · 6 km away
- 7,345 haGadougou 11 February 2026 · 14 days · 18 km away
- 3,440 haGadougou 1January 2021 · 7 days · 27 km away
- 3,780 haGadougou 121 February 2025 · 7 days · 30 km away
- 3,459 haKoulouJanuary 2026 · 5 days · 30 km away
- 3,104 haGadougou 113 February 2026 · 8 days · 30 km away
Frequently asked questions
- How long did the Kokofata fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 23 February 2026 to 27 February 2026 (5 days). The perimeter dates it from 25 February 2026 to 27 February 2026.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,197 hectares (32.0 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Kokofata (3,215 ha, 1.8 %).
- What was the weather like?
- During the fire the temperature reached 38.3 °C, humidity dropped to 12 % and gusts hit 34 km/h. The fire danger index (FWI) reached 55, class Extreme.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mali (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
- Start date: 25 February 2026 → 23 February 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 25 February 2026 to 27 February 2026. 101 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.