Skip to content
worldfires
TZ · Tanzania · –

Kilombero fire, 14 October 2026 Kilombero

Out · last detection 15 Nov 2026, 11:21 UTC

The fire started on 14 October 2026 in Kilombero, Tanzania, and satellites saw it burning for 33 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 15,856 hectares from heat detections, spread across a single municipality.

Number 12 in Tanzania in 2026, of 231.

GWIS near-real-time perimeter, from the layer that changed in August 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
15,856ha
GWIS perimeter (Copernicus)
Duration
33days
14 Oct 2026 – 15 Nov 2026
Municipalities hit
1
districts
Started on
14 Oct
2026
Heat detections
574
in a single hotspot: 138 MW
Danger at start
12
Moderate · FWI index
Average daily power
286MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Oct15 Nov
15 Nov 2026

How it evolved, day by day

14 Oct 2026 · 31 MW · 2 15 Oct 2026 · 310 MW · 7 16 Oct 2026 · 62 MW · 8 17 Oct 2026 · 79 MW · 9 19 Oct 2026 · 126 MW · 5 20 Oct 2026 · 30 MW · 6 21 Oct 2026 · 148 MW · 11 22 Oct 2026 · 244 MW · 27 23 Oct 2026 · 313 MW · 31 24 Oct 2026 · 797 MW · 43 25 Oct 2026 · 188 MW · 10 26 Oct 2026 · 26 MW · 3 27 Oct 2026 · 89 MW · 18 28 Oct 2026 · 598 MW · 56 29 Oct 2026 · 354 MW · 42 30 Oct 2026 · 1,454 MW · 27 31 Oct 2026 · 259 MW · 24 1 Nov 2026 · 106 MW · 10 2 Nov 2026 · 573 MW · 29 3 Nov 2026 · 253 MW · 27 4 Nov 2026 · 250 MW · 28 5 Nov 2026 · 316 MW · 15 6 Nov 2026 · 206 MW · 14 7 Nov 2026 · 704 MW · 34 8 Nov 2026 · 148 MW · 22 9 Nov 2026 · 78 MW · 11 10 Nov 2026 · 205 MW · 29 11 Nov 2026 · 325 MW · 18 14 Nov 2026 · 0 MW · 0 15 Nov 2026 · 22 MW · 8
14 Oct 21 Oct 30 Oct 8 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (108 passes) and with what wind. Watch the film

The weather it burned in

36°high
36km/h · peak gust
29%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 16.2 mm on 16 Nov.

This area had burned before

23% of the perimeter overlaps earlier fires recorded since 2016: 150 ha in 2016, 688 ha in 2018, 677 ha in 2020, 441 ha in 2021, 345 ha in 2022, 1,635 ha in 2023, 1,615 ha in 2024, 3,420 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 3,677 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 10% of the area of London (159 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Kilombero where it started
    15,975 ha reached on 14 Oct
    1.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area9.1 ha
Residents≈ 1,800

Inside the perimeter there were about 9.1 hectares of built-up land and about 1,800 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Oct 31.4 °C 44 % 35 km/h 3.2 mm Moderate 12
15 Oct 32.6 °C 38 % 27 km/h 1.7 mm Low 6
16 Oct 31.9 °C 36 % 26 km/h 1.3 mm Low 8
17 Oct 31.7 °C 38 % 26 km/h 1.7 mm Moderate 12
18 Oct 29.5 °C 47 % 30 km/h 1.3 mm Low 11
19 Oct 31.7 °C 44 % 25 km/h 0.3 mm Moderate 15
20 Oct 34.1 °C 36 % 30 km/h 0.0 mm Moderate 19
21 Oct 33.8 °C 38 % 27 km/h 0.1 mm Moderate 19
22 Oct 35.5 °C 32 % 28 km/h 0.0 mm High 23
23 Oct 35.9 °C 32 % 27 km/h 0.0 mm High 23
24 Oct 34.7 °C 32 % 32 km/h 0.1 mm High 23
25 Oct 34.4 °C 30 % 27 km/h 0.3 mm High 27
26 Oct 34.0 °C 38 % 28 km/h 1.8 mm Moderate 12
27 Oct 34.8 °C 31 % 33 km/h 0.0 mm High 27
28 Oct 34.8 °C 29 % 27 km/h 0.0 mm High 25
29 Oct 36.0 °C 31 % 26 km/h 0.0 mm High 26
30 Oct 35.3 °C 36 % 30 km/h 1.2 mm High 28
31 Oct 33.7 °C 40 % 28 km/h 3.7 mm Low 6
1 Nov 33.8 °C 41 % 30 km/h 2.1 mm Moderate 12
2 Nov 34.5 °C 37 % 30 km/h 1.2 mm Moderate 15
3 Nov 35.1 °C 36 % 33 km/h 0.3 mm High 22
4 Nov 34.4 °C 37 % 27 km/h 0.1 mm High 22
5 Nov 34.9 °C 36 % 34 km/h 0.6 mm High 26
6 Nov 34.5 °C 37 % 36 km/h 0.8 mm High 24
7 Nov 35.0 °C 35 % 27 km/h 0.0 mm High 26
8 Nov 35.8 °C 32 % 28 km/h 0.0 mm High 26
9 Nov 36.1 °C 34 % 25 km/h 0.3 mm High 27
10 Nov 35.5 °C 33 % 30 km/h 0.3 mm High 30
11 Nov 35.6 °C 36 % 32 km/h 0.9 mm High 32
12 Nov 32.4 °C 45 % 28 km/h 5.4 mm Low 7
13 Nov 32.1 °C 56 % 25 km/h 4.7 mm Very low 3
14 Nov 32.3 °C 56 % 27 km/h 6.7 mm Low 11
15 Nov 32.4 °C 53 % 27 km/h 24.3 mm Very low 1
16 Nov after 30.9 °C 56 % 17 km/h 16.2 mm Very low 0

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Oct 2026
After · 17 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 24 October 2026 the air beside the fire reached 112 µg/m³ of PM2.5. That day averaged 50: 3.3 times the WHO daily guideline (15).

PM2.5 peak112 µg/m³
Days over the guideline11 days
PM10114 µg/m³
Optical depth0.55
12 Oct16 Oct20 Oct24 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 574Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Tanzania

Frequently asked questions

How long did the Kilombero fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 14 October 2026 to 15 November 2026 (33 days). The perimeter dates it from 20 October 2026 to 11 November 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 15,856 hectares (158.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Kilombero (15,975 ha, 1.2 %).
Is the Kilombero fire still active?
No fire detections since 15 Nov 2026, 11:21 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 36.1 °C, humidity dropped to 29 % and gusts hit 36 km/h. The fire danger index (FWI) reached 32, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Tanzania (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 12 Changes in area, dates, name, official record or merged pages, compared every night since 28 October 2026.
  1. Last day with fire: 27 October 2026 → 11 November 2026.
  2. Area: 13,140 → 15,629 ha.
  3. Area: 12,604 → 13,140 ha.
  4. Area: 12,317 → 12,604 ha.
  5. Area: 12,063 → 12,317 ha.
  6. Area: 11,700 → 12,063 ha.
  7. Area: 11,463 → 11,700 ha.
  8. Area: 10,792 → 11,463 ha.
  9. Area: 5,180 → 10,792 ha.
  10. Area: 5,078 → 5,180 ha.
  11. Area: 3,704 → 5,078 ha.
  12. Page published (3,704 ha).

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 20 October 2026 to 11 November 2026. 574 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.