Skip to content
worldfires
UA · Ukraine · –

Kiliia fire, September 2020 Кілійський район · Kiliia

Out · last detection 25 Sept 2020, 23:57 UTC

The fire started on 24 September 2020 in Kiliia, Ukraine, and satellites saw it burning for 2 days. Copernicus mapped a burnt perimeter of 294 hectares from satellite imagery, spread across a single municipality.

This entry is probably an agricultural burn of stubble, meadow or peatland, not a wildfire. Before the war, stubble and meadows in Ukraine were burnt every spring and autumn, and the fire often got out of hand. This is our assumption, based on the time of year, ground with almost no woodland and the lack of news about this fire; it is not confirmed. That is why it is left out of the wildfire rankings.

The power measured by the satellite is low (20.8 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
294ha
Copernicus perimeter
Duration
2days
24 Sept 2020 – 25 Sept 2020
Municipalities hit
1
districts
Started on
24 Sept
2020
Heat detections
18
in a single hotspot: 21 MW
Danger at start
26
High · FWI index
Average daily power
109MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 24 Sept25 Sept

How it evolved, day by day

25 Sept 2020 · 109 MW · 18

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

24°high
29km/h · peak gust
55%lowest humidity

It had gone 18 days without rain (1 mm or more) when it started. Rain came after the fire: 1.5 mm on 27 Sept.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

What happened to each town

  1. Kiliia Кілійський район 0.5 km from the centre where it started
    294 ha reached on 25 Sept
    0.2 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land100 %

Land cover inside the perimeter as reported by Copernicus EFFIS (outside the Corine Land Cover area).

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
24 Sept 24.5 °C 55 % 24 km/h 0.0 mm High 26
25 Sept 24.1 °C 59 % 29 km/h 0.0 mm High 23
26 Sept after 24.7 °C 67 % 55 km/h 0.4 mm Very high 44
27 Sept after 23.1 °C 39 % 55 km/h 1.5 mm High 24

Its twins: fires that started in the same weather

It started with an FWI of 25.5, a minimum humidity of 55% and 18 days without rain. Fires in the area that started in weather like this since 2019: 26.

FWI at the start 25.5
Minimum humidity 55 %
Days without rain 18
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Bilozerka fire, July 2026
130 ha 1 day FWI 24.9 Min. humidity 49 % 233 km away, in 2026

First rain (1 mm or more) after it ended: 7.6 mm on 8 Jul.

What happened to them

3 days
median duration
230 ha
median area
4 %
went past 1,000 ha
3.8 mm
rain at the end (median; 17 of 26 had it)

It burned an area similar to its twins (294 ha against a median of 230 ha) and lasted 2 days, against 3 days.

In 9 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.5 mmfirst rain
27 Sept2 days after it ended
29km/h · max. gust

It was considered over on 25 Sept, and on 27 Sept 1.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 17 of 26, with a median of 3.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2019.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 17 Sept 2020
After · 2 Oct 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 26 September 2020 the air beside the fire reached 20 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak20 µg/m³
Days over the guideline0 days
PM1035 µg/m³
22 Sept24 Sept26 Sept28 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 18Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Ukraine

Frequently asked questions

How long did the Kiliia fire last?
Copernicus dates it between 24 September 2020 and 25 September 2020: 2 days between the first and last image with fire.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 294 hectares (2.9 km²). Official national figures may differ.
Which municipalities burned?
The fire only entered Kiliia (294 ha, 0.2 %).
Did the fire reach a town?
The fire started in Kiliia and came within 0.5 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 24.5 °C, humidity dropped to 55 % and gusts hit 29 km/h. The fire danger index (FWI) reached 26, class High.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Ukraine (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2019 with a similar FWI, humidity and dry spell: 26. Their median duration was 3 days and their median area 230 ha; 4 % went past 1,000 ha. In 9 of 26, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 101 · 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 101 · 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 18 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.