Skip to content
worldfires
AZ · Azerbaijan · –

Khojavend District fire, 24 July 2025 Khojavend District

Out · last detection 25 Jul 2025, 10:26 UTC

The fire started on 24 July 2025 in Khojavend District, Azerbaijan, and satellites saw it burning for 2 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 521 hectares from heat detections, spread across a single municipality.

It is the 260th largest in Contiguous Azerbaijan since 2016 (of 278 with a page). Number 17 in Azerbaijan in 2025, of 18.

The power measured by the satellite is low (18.4 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
521ha
GWIS perimeter (Copernicus)
Duration
2days
24 Jul 2025 – 25 Jul 2025
Municipalities hit
1
districts
Started on
24 Jul
2025
Heat detections
14
in a single hotspot: 18 MW
Danger at start
32
High · FWI index
Average daily power
68MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 24 Jul25 Jul
25 Jul 2025

How it evolved, day by day

24 Jul 2025 · 1 MW · 2 25 Jul 2025 · 135 MW · 12
24 Jul 25 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
35km/h · peak gust
34%lowest humidity

It had gone 13 days without rain (1 mm or more) when it started.

This area had burned before

57% of the perimeter overlaps earlier fires recorded since 2016: 299 ha in 2019.

How big is it?

10 km
It burned the equivalent of 0.3% of the area of London (5.2 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Khojavend District where it started
    522 ha reached on 24 Jul
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.67 ha
Residents≈ 150

Inside the perimeter there were about 0.67 hectares of built-up land and about 150 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
24 Jul 32.7 °C 34 % 30 km/h 0.0 mm High 32
25 Jul 31.9 °C 35 % 35 km/h 0.0 mm High 36
26 Jul after 31.4 °C 35 % 36 km/h 0.0 mm High 37
27 Jul after 31.9 °C 37 % 29 km/h 0.0 mm High 30
28 Jul after 32.2 °C 41 % 28 km/h 0.0 mm High 32
29 Jul after 30.6 °C 53 % 30 km/h 0.4 mm High 23
30 Jul after 32.3 °C 44 % 28 km/h 0.0 mm High 24
31 Jul after 32.9 °C 45 % 28 km/h 0.0 mm High 26
1 Aug after 31.2 °C 54 % 27 km/h 0.0 mm High 24
2 Aug after 31.5 °C 46 % 28 km/h 0.0 mm High 24
3 Aug after 32.6 °C 47 % 27 km/h 0.0 mm High 25
4 Aug after 33.0 °C 39 % 27 km/h 0.0 mm High 30

Its twins: fires that started in the same weather

It started with an FWI of 32.4, a minimum humidity of 34% and 13 days without rain. Fires in the area that started in weather like this since 2016: 27.

FWI at the start 32.4
Minimum humidity 34 %
Days without rain 13
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Fuzuli District fire, July 2017
908 ha 5 days FWI 32.2 Min. humidity 34 % 21 km away, in 2017

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

2 days
median duration
857 ha
median area
22 %
went past 1,000 ha
2.1 mm
rain at the end (median; 11 of 27 had it)

It stayed below its twins: 521 ha against a median of 857 ha. It lasted 2 days, against 2 days.

In 16 of 27, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
35km/h · max. gust

It was considered over on 25 Jul, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 11 of 27, with a median of 2.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 17 Jul 2025
After · 1 Aug 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 26 July 2025 the air beside the fire reached 23 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak23 µg/m³
Days over the guideline0 days
PM1090 µg/m³
Optical depth0.63
22 Jul24 Jul26 Jul28 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 14Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Azerbaijan

Frequently asked questions

How long did the Khojavend District fire last?
GWIS (Copernicus) dates it between 24 July 2025 and 25 July 2025: 2 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 521 hectares (5.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Khojavend District (522 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 32.7 °C, humidity dropped to 34 % and gusts hit 35 km/h. The fire danger index (FWI) reached 36, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Azerbaijan (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 27. Their median duration was 2 days and their median area 857 ha; 22 % went past 1,000 ha. In 16 of 27, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 14 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution-ShareAlike 3.0 Unported). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.