Skip to content
worldfires
ZM · Zambia · –

Kawambwa fire, 10 August 2020 Kawambwa

Out · last detection 22 Aug 2020, 12:04 UTC

The fire started on 10 August 2020 in Kawambwa, Zambia, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,169 hectares from heat detections, spread across a single municipality.

It is the 173th largest in Luapula since 2016 (of 449 with a page). Number 70 in Zambia in 2020, of 229.

Burnt area
6,169ha
GWIS perimeter (Copernicus)
Duration
13days
10 Aug 2020 – 22 Aug 2020
Municipalities hit
1
districts
Started on
10 Aug
2020
Heat detections
225
in a single hotspot: 98 MW
Danger at start
43
Very high · FWI index
Average daily power
347MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 10 Aug22 Aug
22 Aug 2020

How it evolved, day by day

10 Aug 2020 · 348 MW · 26 11 Aug 2020 · 128 MW · 21 12 Aug 2020 · 285 MW · 23 13 Aug 2020 · 1,237 MW · 65 14 Aug 2020 · 450 MW · 32 15 Aug 2020 · 33 MW · 4 18 Aug 2020 · 9 MW · 3 19 Aug 2020 · 18 MW · 5 21 Aug 2020 · 470 MW · 20 22 Aug 2020 · 489 MW · 26
10 Aug 13 Aug 18 Aug 21 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
42km/h · peak gust
14%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

97% of the perimeter overlaps earlier fires recorded since 2016: 3,932 ha in 2016, 3,156 ha in 2017, 2,981 ha in 2018, 4,999 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 5,999 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.9% of the area of London (62 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Kawambwa where it started
    6,209 ha
    0.8 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area16 ha
Residents≈ 1,000

Inside the perimeter there were about 16 hectares of built-up land and about 1,000 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 91 % of the area in Zambia

Day High Min. humidity Peak gust Rain Danger (FWI)
10 Aug 28.2 °C 20 % 31 km/h 0.0 mm Very high 43
11 Aug 29.3 °C 18 % 29 km/h 0.0 mm Very high 38
12 Aug 29.5 °C 19 % 31 km/h 0.0 mm Very high 40
13 Aug 30.3 °C 14 % 35 km/h 0.0 mm Very high 46
14 Aug 30.4 °C 16 % 35 km/h 0.0 mm Very high 50
15 Aug 29.4 °C 23 % 35 km/h 0.0 mm Very high 43
16 Aug 30.6 °C 22 % 29 km/h 0.0 mm Very high 38
17 Aug 31.5 °C 17 % 30 km/h 0.0 mm Very high 42
18 Aug 31.9 °C 22 % 33 km/h 0.0 mm Very high 48
19 Aug 32.4 °C 19 % 28 km/h 0.0 mm Very high 40
20 Aug 31.6 °C 25 % 37 km/h 0.0 mm Extreme 50
21 Aug 30.7 °C 22 % 35 km/h 0.0 mm Very high 50
22 Aug 29.4 °C 23 % 42 km/h 0.0 mm Extreme 53
23 Aug after 27.8 °C 31 % 39 km/h 0.0 mm Very high 40
24 Aug after 28.0 °C 35 % 35 km/h 0.0 mm High 36
25 Aug after 30.3 °C 32 % 30 km/h 0.0 mm High 34
26 Aug after 30.5 °C 28 % 32 km/h 0.0 mm High 38
27 Aug after 30.6 °C 27 % 33 km/h 0.0 mm Very high 43
28 Aug after 31.5 °C 28 % 36 km/h 0.0 mm Very high 45
29 Aug after 30.7 °C 27 % 30 km/h 0.0 mm High 38
30 Aug after 30.6 °C 37 % 31 km/h 0.0 mm High 33
31 Aug after 31.4 °C 28 % 31 km/h 0.0 mm High 36
1 Sept after 32.6 °C 18 % 38 km/h 0.0 mm Extreme 57

Its twins: fires that started in the same weather

It started with an FWI of 42.6, a minimum humidity of 20% and more than two months without rain. Fires in the area that started in weather like this since 2016: 42.

FWI at the start 42.6
Minimum humidity 20 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Chipili fire, August 2021
27,636 ha 31 days FWI 43.7 Min. humidity 19 % 36 km away, in 2021

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

17 days
median duration
4,406 ha
median area
26 %
went past 10,000 ha
3.8 mm
rain at the end (median; 4 of 42 had it)

It burned an area similar to its twins (6,169 ha against a median of 4,406 ha) and lasted 13 days, against 17 days.

In 38 of 42, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
42km/h · max. gust

It was considered over on 22 Aug, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 4 of 42, with a median of 3.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 3 Aug 2020
After · 29 Aug 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 225Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Zambia

Frequently asked questions

How long did the Kawambwa fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 10 August 2020 to 22 August 2020 (13 days). The perimeter dates it from 10 August 2020 to 15 August 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,169 hectares (61.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Kawambwa (6,209 ha, 0.8 %).
What was the weather like?
During the fire the temperature reached 32.4 °C, humidity dropped to 14 % and gusts hit 42 km/h. The fire danger index (FWI) reached 53, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Zambia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 42. Their median duration was 17 days and their median area 4,406 ha; 26 % went past 10,000 ha. In 38 of 42, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 15 August 2020 → 22 August 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 10 August 2020 to 15 August 2020. 225 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.