Skip to content
worldfires
RU · Russia · –

Katangsky Rayon fire, 16 August 2020 Katangsky Rayon, Киренский район

Out · last detection 1 Sept 2020, 19:39 UTC

The fire started on 16 August 2020 in Katangsky Rayon, Russia, and satellites saw it burning for 17 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 12,731 hectares from heat detections, spread across 2 municipalities.

It is the 85th largest in Irkutsk Oblast since 2016 (of 421 with a page). Number 114 in Russia in 2020, of 592.

Burnt area
12,731ha
GWIS perimeter (Copernicus)
Duration
17days
16 Aug 2020 – 1 Sept 2020
Municipalities hit
2
districts
Started on
16 Aug
2020
Heat detections
2,804
in a single hotspot: 186 MW
Danger at start
19
Moderate · FWI index
Average daily power
912MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 16 Aug1 Sept
1 Sept 2020

How it evolved, day by day

16 Aug 2020 · 16 MW · 6 17 Aug 2020 · 277 MW · 54 18 Aug 2020 · 2,522 MW · 190 19 Aug 2020 · 2,062 MW · 336 20 Aug 2020 · 516 MW · 123 21 Aug 2020 · 1,349 MW · 286 22 Aug 2020 · 646 MW · 271 23 Aug 2020 · 1,342 MW · 282 24 Aug 2020 · 944 MW · 245 25 Aug 2020 · 1,141 MW · 274 26 Aug 2020 · 1,465 MW · 267 27 Aug 2020 · 3,085 MW · 430 28 Aug 2020 · 96 MW · 15 29 Aug 2020 · 22 MW · 15 30 Aug 2020 · 1 MW · 1 31 Aug 2020 · 11 MW · 7 1 Sept 2020 · 2 MW · 2
16 Aug 20 Aug 24 Aug 27 Aug 1 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

26°high
39km/h · peak gust
21%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started. Rain came after the fire: 1.4 mm on 2 Sept.

This area had burned before

18% of the perimeter overlaps earlier fires recorded since 2016: 260 ha in 2017, 2,128 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 2,260 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 8% of the area of London (127 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Katangsky Rayon where it started
    10,737 ha reached on 16 Aug
    0.1 %
  2. 1,211 ha reached on 21 Aug
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
16 Aug 18.7 °C 28 % 39 km/h 0.0 mm Moderate 19
17 Aug 19.9 °C 28 % 35 km/h 0.0 mm Moderate 21
18 Aug 22.8 °C 21 % 33 km/h 0.0 mm High 24
19 Aug 25.9 °C 25 % 29 km/h 0.0 mm High 22
20 Aug 24.0 °C 42 % 32 km/h 2.7 mm High 21
21 Aug 24.3 °C 36 % 35 km/h 0.1 mm Low 7
22 Aug 24.0 °C 37 % 31 km/h 0.0 mm Moderate 13
23 Aug 23.1 °C 38 % 27 km/h 0.0 mm Moderate 15
24 Aug 21.4 °C 41 % 25 km/h 0.0 mm Moderate 15
25 Aug 22.6 °C 33 % 27 km/h 0.0 mm Moderate 17
26 Aug 23.2 °C 25 % 30 km/h 0.0 mm High 23
27 Aug 23.4 °C 22 % 33 km/h 0.0 mm High 30
28 Aug 22.4 °C 35 % 25 km/h 0.0 mm Moderate 16
29 Aug 21.4 °C 46 % 23 km/h 0.0 mm Moderate 18
30 Aug 20.5 °C 41 % 20 km/h 0.0 mm Moderate 15
31 Aug 19.6 °C 49 % 26 km/h 1.3 mm Moderate 17
1 Sept 17.6 °C 53 % 35 km/h 0.0 mm Low 9
2 Sept after 17.1 °C 58 % 49 km/h 1.4 mm High 22

Its twins: fires that started in the same weather

It started with an FWI of 19.1, a minimum humidity of 28% and 2 days without rain. Fires in the area that started in weather like this since 2016: 16.

FWI at the start 19.1
Minimum humidity 28 %
Days without rain 2
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Katangsky Rayon fire, August 2017
5,308 ha 20 days FWI 20.8 Min. humidity 29 % 51 km away, in 2017

First rain (1 mm or more) after it ended: 3.0 mm on 25 Aug.

What happened to them

13 days
median duration
4,706 ha
median area
19 %
went past 10,000 ha
3.1 mm
rain at the end (median; 16 of 16 had it)

It was 2.7 times larger than the median of its twins and lasted 17 days, against 13 days.

Only 2 of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 3.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.4 mmfirst rain
2 Septthe day after it ended
39km/h · max. gust

It was considered over on 1 Sept, and on 2 Sept 1.4 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 16 of 16, with a median of 3.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 9 Aug 2020
After · 8 Sept 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 2,804Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Katangsky Rayon fire last?
GWIS (Copernicus) dates it between 16 August 2020 and 1 September 2020: 17 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 12,731 hectares (127.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Katangsky Rayon (10,737 ha, 0.1 %); Киренский район (1,211 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 25.9 °C, humidity dropped to 21 % and gusts hit 39 km/h. The fire danger index (FWI) reached 30, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 16. Their median duration was 13 days and their median area 4,706 ha; 19 % went past 10,000 ha. Only 2 of its 16 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 3.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 2,804 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.