Skip to content
worldfires
RU · Russia · –

Katangsky Rayon fire, 16 August 2020 Katangsky Rayon

Out · last detection 1 Sept 2020, 05:51 UTC

The fire started on 16 August 2020 in Katangsky Rayon, Russia, and satellites saw it burning for 17 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 21,368 hectares from heat detections, spread across a single municipality.

It is the 45th largest in Irkutsk Oblast since 2016 (of 421 with a page). Number 56 in Russia in 2020, of 592.

Burnt area
21,368ha
GWIS perimeter (Copernicus)
Duration
17days
16 Aug 2020 – 1 Sept 2020
Municipalities hit
1
districts
Started on
16 Aug
2020
Heat detections
4,073
in a single hotspot: 308 MW
Danger at start
19
Moderate · FWI index
Average daily power
2.7GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 16 Aug1 Sept
1 Sept 2020

How it evolved, day by day

16 Aug 2020 · 150 MW · 23 17 Aug 2020 · 723 MW · 118 18 Aug 2020 · 10,729 MW · 452 19 Aug 2020 · 4,465 MW · 454 20 Aug 2020 · 124 MW · 35 22 Aug 2020 · 20 MW · 10 23 Aug 2020 · 613 MW · 124 24 Aug 2020 · 4,525 MW · 379 25 Aug 2020 · 3,506 MW · 365 26 Aug 2020 · 3,210 MW · 449 27 Aug 2020 · 4,286 MW · 622 28 Aug 2020 · 5,403 MW · 326 29 Aug 2020 · 3,191 MW · 317 30 Aug 2020 · 2,081 MW · 270 31 Aug 2020 · 429 MW · 98 1 Sept 2020 · 482 MW · 31
18 Aug 25 Aug 29 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

25°high
36km/h · peak gust
20%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started. Rain came after the fire: 9.9 mm on 2 Sept.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 13% of the area of London (214 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Katangsky Rayon where it started
    21,155 ha reached on 16 Aug
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
16 Aug 18.4 °C 32 % 35 km/h 0.0 mm Moderate 19
17 Aug 21.5 °C 27 % 28 km/h 0.0 mm Moderate 20
18 Aug 23.8 °C 20 % 29 km/h 0.0 mm High 24
19 Aug 24.7 °C 23 % 29 km/h 0.0 mm High 28
20 Aug 22.4 °C 46 % 36 km/h 3.6 mm High 30
21 Aug 23.1 °C 34 % 34 km/h 0.0 mm Low 6
22 Aug 22.1 °C 51 % 24 km/h 0.2 mm Low 8
23 Aug 22.4 °C 33 % 35 km/h 0.0 mm Moderate 21
24 Aug 21.4 °C 29 % 32 km/h 0.0 mm High 23
25 Aug 21.9 °C 31 % 35 km/h 0.0 mm High 23
26 Aug 20.7 °C 28 % 36 km/h 0.0 mm High 26
27 Aug 21.1 °C 32 % 26 km/h 0.0 mm High 23
28 Aug 22.8 °C 35 % 20 km/h 0.0 mm Moderate 19
29 Aug 21.7 °C 42 % 30 km/h 0.0 mm High 21
30 Aug 20.4 °C 46 % 28 km/h 0.4 mm Moderate 18
31 Aug 18.6 °C 50 % 32 km/h 0.9 mm Moderate 15
1 Sept 16.9 °C 54 % 31 km/h 2.6 mm Low 9
2 Sept after 16.8 °C 79 % 42 km/h 9.9 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 18.8, a minimum humidity of 32% and 2 days without rain. Fires in the area that started in weather like this since 2016: 24.

FWI at the start 18.8
Minimum humidity 32 %
Days without rain 2
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Evenkiysky Rayon fire, July 2018
13,825 ha 9 days FWI 18.6 Min. humidity 32 % 196 km away, in 2018

First rain (1 mm or more) after it ended: 12.6 mm on 27 Jul.

What happened to them

15 days
median duration
5,394 ha
median area
33 %
went past 10,000 ha
4.0 mm
rain at the end (median; 24 of 24 had it)

It was 4.0 times larger than the median of its twins and lasted 17 days, against 15 days.

Only 3 of its 24 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 4.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

9.9 mmfirst rain
2 Septthe day after it ended
36km/h · max. gust

It was considered over on 1 Sept, and on 2 Sept 9.9 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 24 of 24, with a median of 4.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 9 Aug 2020
After · 8 Sept 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 4,073Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Katangsky Rayon fire last?
GWIS (Copernicus) dates it between 16 August 2020 and 1 September 2020: 17 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 21,368 hectares (213.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Katangsky Rayon (21,155 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 24.7 °C, humidity dropped to 20 % and gusts hit 36 km/h. The fire danger index (FWI) reached 30, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 24. Their median duration was 15 days and their median area 5,394 ha; 33 % went past 10,000 ha. Only 3 of its 24 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 4.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 4,073 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.