Skip to content
worldfires
RU · Russia · –

Katangsky Rayon fire, 14 July 2019 Katangsky Rayon

Out · last detection 15 Aug 2019, 19:20 UTC

The fire started on 14 July 2019 in Katangsky Rayon, Russia, and satellites saw it burning for 33 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 52,812 hectares from heat detections, spread across a single municipality.

It is the 9th largest in Irkutsk Oblast since 2016 (of 421 with a page). Number 15 in Russia in 2019, of 610.

Burnt area
52,812ha
GWIS perimeter (Copernicus)
Duration
33days
14 Jul 2019 – 15 Aug 2019
Municipalities hit
1
districts
Started on
14 Jul
2019
Heat detections
7,985
in a single hotspot: 168 MW
Danger at start
15
Moderate · FWI index
Average daily power
1.6GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Jul15 Aug
15 Aug 2019

How it evolved, day by day

14 Jul 2019 · 13 MW · 5 15 Jul 2019 · 120 MW · 31 16 Jul 2019 · 203 MW · 44 17 Jul 2019 · 207 MW · 37 18 Jul 2019 · 46 MW · 17 19 Jul 2019 · 408 MW · 99 20 Jul 2019 · 2,515 MW · 361 21 Jul 2019 · 4,480 MW · 530 22 Jul 2019 · 1,380 MW · 292 23 Jul 2019 · 13,334 MW · 525 24 Jul 2019 · 618 MW · 213 25 Jul 2019 · 483 MW · 198 26 Jul 2019 · 460 MW · 173 27 Jul 2019 · 1,067 MW · 275 28 Jul 2019 · 2,228 MW · 548 29 Jul 2019 · 982 MW · 438 30 Jul 2019 · 787 MW · 287 31 Jul 2019 · 1,029 MW · 314 1 Aug 2019 · 242 MW · 149 2 Aug 2019 · 276 MW · 134 3 Aug 2019 · 29 MW · 15 4 Aug 2019 · 1,192 MW · 273 5 Aug 2019 · 4,634 MW · 679 6 Aug 2019 · 9,075 MW · 969 7 Aug 2019 · 545 MW · 210 8 Aug 2019 · 162 MW · 98 9 Aug 2019 · 1,981 MW · 493 10 Aug 2019 · 1,832 MW · 525 11 Aug 2019 · 77 MW · 45 12 Aug 2019 · 1 MW · 1 15 Aug 2019 · 9 MW · 7
14 Jul 23 Jul 28 Jul 4 Aug 11 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

31°high
65km/h · peak gust
26%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 1.5 mm on 16 Aug.

This area had burned before

0% of the perimeter overlaps earlier fires recorded since 2016: 143 ha in 2017.

How big is it?

10 km
It burned the equivalent of 33% of the area of London (528 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Katangsky Rayon where it started
    50,907 ha reached on 14 Jul
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Jul 26.9 °C 44 % 22 km/h 0.0 mm Moderate 15
15 Jul 27.5 °C 40 % 41 km/h 0.0 mm High 24
16 Jul 28.9 °C 43 % 42 km/h 0.0 mm High 29
17 Jul 30.6 °C 35 % 32 km/h 0.0 mm High 26
18 Jul 22.7 °C 45 % 41 km/h 0.0 mm High 26
19 Jul 19.9 °C 30 % 50 km/h 0.0 mm High 35
20 Jul 19.7 °C 27 % 65 km/h 0.0 mm Very high 48
21 Jul 23.5 °C 26 % 52 km/h 0.0 mm Very high 44
22 Jul 24.5 °C 26 % 41 km/h 0.0 mm Very high 38
23 Jul 27.6 °C 26 % 41 km/h 0.0 mm Very high 38
24 Jul 27.4 °C 31 % 26 km/h 0.0 mm High 23
25 Jul 28.0 °C 34 % 19 km/h 0.0 mm High 23
26 Jul 27.5 °C 37 % 14 km/h 0.0 mm Moderate 21
27 Jul 27.6 °C 40 % 16 km/h 0.0 mm High 22
28 Jul 28.9 °C 37 % 37 km/h 0.2 mm High 32
29 Jul 24.7 °C 39 % 41 km/h 0.0 mm High 34
30 Jul 24.8 °C 39 % 17 km/h 0.0 mm Moderate 20
31 Jul 24.9 °C 41 % 27 km/h 0.0 mm High 24
1 Aug 22.6 °C 54 % 26 km/h 0.3 mm Moderate 19
2 Aug 25.1 °C 50 % 33 km/h 0.1 mm High 22
3 Aug 21.0 °C 67 % 38 km/h 2.6 mm Moderate 15
4 Aug 21.8 °C 34 % 30 km/h 0.0 mm Low 7
5 Aug 23.2 °C 30 % 24 km/h 0.0 mm Moderate 15
6 Aug 26.7 °C 26 % 25 km/h 0.0 mm High 22
7 Aug 25.6 °C 36 % 17 km/h 0.0 mm High 22
8 Aug 24.8 °C 38 % 20 km/h 0.0 mm High 23
9 Aug 27.3 °C 41 % 32 km/h 0.0 mm High 26
10 Aug 26.4 °C 41 % 22 km/h 0.0 mm High 21
11 Aug 23.0 °C 57 % 18 km/h 0.2 mm Moderate 14
12 Aug 16.3 °C 61 % 47 km/h 1.4 mm Low 9
13 Aug 16.4 °C 56 % 17 km/h 0.0 mm Low 6
14 Aug 18.2 °C 69 % 29 km/h 4.9 mm Very low 0
15 Aug 20.1 °C 60 % 31 km/h 2.9 mm Very low 4
16 Aug after 17.9 °C 69 % 29 km/h 1.5 mm Very low 2

Its twins: fires that started in the same weather

It started with an FWI of 15.0, a minimum humidity of 44% and rain the day before. Fires in the area that started in weather like this since 2016: 22.

FWI at the start 15.0
Minimum humidity 44 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Katangsky Rayon fire, July 2016
3,493 ha 12 days FWI 15.3 Min. humidity 45 % 99 km away, in 2016

First rain (1 mm or more) after it ended: 3.1 mm on 8 Aug.

What happened to them

11 days
median duration
5,140 ha
median area
18 %
went past 10,000 ha
3.5 mm
rain at the end (median; 22 of 22 had it)

It was 10.3 times larger than the median of its twins and lasted 33 days, against 11 days.

None of its 22 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 3.5 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.5 mmfirst rain
16 Augthe day after it ended
65km/h · max. gust

It was considered over on 15 Aug, and on 16 Aug 1.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 22 of 22, with a median of 3.5 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Jul 2019
After · 22 Aug 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 7,985Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Katangsky Rayon fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 14 July 2019 to 15 August 2019 (33 days). The perimeter dates it from 14 July 2019 to 12 August 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 52,812 hectares (528.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Katangsky Rayon (50,907 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 30.6 °C, humidity dropped to 26 % and gusts hit 65 km/h. The fire danger index (FWI) reached 48, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 22. Their median duration was 11 days and their median area 5,140 ha; 18 % went past 10,000 ha. None of its 22 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 3.5 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 12 August 2019 → 15 August 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 14 July 2019 to 12 August 2019. 7,985 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.