Skip to content
worldfires
CD · Democratic Republic of the Congo · –

Katako-Kombe fire, 9 June 2026 Katako-Kombe, Kibombo

Out · last detection 14 Jul 2026, 11:45 UTC

The fire started on 9 June 2026 in Katako-Kombe, Democratic Republic of the Congo, and satellites saw it burning for 36 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 17,991 hectares from heat detections, spread across 2 municipalities.

Number 74 in Democratic Republic of the Congo in 2026, of 515.

GWIS near-real-time perimeter, from the layer that changed in August 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
17,991ha
GWIS perimeter (Copernicus)
Duration
36days
9 Jun 2026 – 14 Jul 2026
Municipalities hit
2
territories
Started on
9 Jun
2026
Heat detections
726
in a single hotspot: 237 MW
Danger at start
12
Moderate · FWI index
Average daily power
406MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 9 Jun14 Jul
14 Jul 2026

How it evolved, day by day

9 Jun 2026 · 24 MW · 3 11 Jun 2026 · 32 MW · 4 12 Jun 2026 · 17 MW · 2 13 Jun 2026 · 170 MW · 12 14 Jun 2026 · 48 MW · 6 15 Jun 2026 · 54 MW · 4 16 Jun 2026 · 143 MW · 10 19 Jun 2026 · 55 MW · 4 20 Jun 2026 · 95 MW · 10 21 Jun 2026 · 659 MW · 46 22 Jun 2026 · 926 MW · 46 23 Jun 2026 · 626 MW · 20 24 Jun 2026 · 9 MW · 3 25 Jun 2026 · 256 MW · 23 26 Jun 2026 · 768 MW · 76 27 Jun 2026 · 995 MW · 48 29 Jun 2026 · 105 MW · 12 30 Jun 2026 · 285 MW · 29 1 Jul 2026 · 665 MW · 28 2 Jul 2026 · 502 MW · 24 3 Jul 2026 · 3,480 MW · 133 4 Jul 2026 · 23 MW · 10 5 Jul 2026 · 312 MW · 38 6 Jul 2026 · 372 MW · 33 8 Jul 2026 · 243 MW · 19 10 Jul 2026 · 69 MW · 10 12 Jul 2026 · 5 MW · 1 13 Jul 2026 · 653 MW · 55 14 Jul 2026 · 175 MW · 17
9 Jun 16 Jun 24 Jun 3 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (36 passes) and with what wind. Watch the film

The weather it burned in

36°high
35km/h · peak gust
18%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 4.6 mm on 15 Jul.

This area had burned before

89% of the perimeter overlaps earlier fires recorded since 2016: 2,124 ha in 2016, 790 ha in 2017, 4,682 ha in 2018, 901 ha in 2019, 8,230 ha in 2020, 5,034 ha in 2021, 5,427 ha in 2022, 10,711 ha in 2023, 2,858 ha in 2024, 2,987 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 16,083 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 11% of the area of London (180 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Katako-Kombe where it started
    19,480 ha reached on 9 Jun
    0.8 %
  2. 97 ha reached on 21 Jun
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area18 ha
Residents≈ 450

Inside the perimeter there were about 18 hectares of built-up land and about 450 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
9 Jun 33.1 °C 44 % 30 km/h 0.1 mm Moderate 12
10 Jun 33.7 °C 35 % 27 km/h 0.0 mm Moderate 18
11 Jun 33.6 °C 36 % 29 km/h 0.0 mm Moderate 18
12 Jun 34.4 °C 29 % 28 km/h 0.0 mm High 25
13 Jun 34.9 °C 26 % 29 km/h 0.0 mm High 29
14 Jun 35.6 °C 23 % 32 km/h 0.0 mm High 37
15 Jun 34.3 °C 26 % 30 km/h 0.0 mm High 32
16 Jun 30.7 °C 51 % 25 km/h 0.1 mm Moderate 16
17 Jun 32.7 °C 36 % 29 km/h 0.0 mm Moderate 20
18 Jun 33.4 °C 32 % 22 km/h 0.0 mm High 23
19 Jun 32.2 °C 39 % 17 km/h 0.0 mm Moderate 21
20 Jun 34.9 °C 29 % 32 km/h 0.0 mm High 32
21 Jun 35.4 °C 24 % 30 km/h 0.0 mm High 38
22 Jun 34.3 °C 22 % 24 km/h 0.0 mm High 35
23 Jun 33.7 °C 24 % 22 km/h 0.0 mm High 34
24 Jun 33.2 °C 26 % 21 km/h 0.0 mm High 30
25 Jun 34.1 °C 25 % 21 km/h 0.0 mm High 33
26 Jun 34.6 °C 25 % 23 km/h 0.0 mm High 35
27 Jun 34.8 °C 20 % 31 km/h 0.0 mm Very high 45
28 Jun 34.2 °C 23 % 22 km/h 0.0 mm High 35
29 Jun 34.1 °C 21 % 22 km/h 0.0 mm Very high 39
30 Jun 35.7 °C 20 % 32 km/h 0.0 mm Very high 48
1 Jul 35.6 °C 20 % 17 km/h 0.0 mm High 34
2 Jul 33.9 °C 30 % 20 km/h 0.0 mm High 31
3 Jul 35.6 °C 27 % 24 km/h 0.0 mm High 32
4 Jul 35.9 °C 18 % 25 km/h 0.0 mm Very high 45
5 Jul 35.9 °C 19 % 33 km/h 0.0 mm Extreme 53
6 Jul 36.3 °C 18 % 35 km/h 0.0 mm Extreme 53
7 Jul 34.4 °C 24 % 35 km/h 0.0 mm Extreme 55
8 Jul 34.3 °C 27 % 32 km/h 0.0 mm Very high 47
9 Jul 34.0 °C 31 % 18 km/h 0.0 mm High 35
10 Jul 34.7 °C 30 % 23 km/h 0.0 mm High 38
11 Jul 33.6 °C 35 % 26 km/h 0.0 mm High 38
12 Jul 34.4 °C 33 % 22 km/h 0.0 mm High 30
13 Jul 35.2 °C 32 % 21 km/h 0.2 mm High 28
14 Jul 33.9 °C 36 % 21 km/h 0.2 mm High 31
15 Jul after 28.2 °C 66 % 26 km/h 4.6 mm Moderate 19

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 2 Jun 2026
After · 21 Jul 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 9 July 2026 the air beside the fire reached 198 µg/m³ of PM2.5. That day averaged 106: 7.1 times the WHO daily guideline (15).

PM2.5 peak198 µg/m³
Days over the guideline33 days
PM10207 µg/m³
Optical depth2.07
14 Jun21 Jun28 Jun5 Jul12 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 726Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Democratic Republic of the Congo

Frequently asked questions

How long did the Katako-Kombe fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 9 June 2026 to 14 July 2026 (36 days). The perimeter dates it from 16 June 2026 to 13 July 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 17,991 hectares (179.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Katako-Kombe (19,480 ha, 0.8 %); Kibombo (97 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 36.3 °C, humidity dropped to 18 % and gusts hit 35 km/h. The fire danger index (FWI) reached 55, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Democratic Republic of the Congo (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 3 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 19,434 → 17,991 ha.
  2. Last day with fire: 13 July 2026 → 14 July 2026.
  3. Start date: 16 June 2026 → 9 June 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 16 June 2026 to 13 July 2026. 726 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.