Skip to content
worldfires
RU · Russia · –

Kargasok region fire, 14 June 2026 Kargasok region

Out · last detection 25 Jun 2026, 05:56 UTC

The fire started on 14 June 2026 in Kargasok region, Russia, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 15,565 hectares from heat detections, spread across a single municipality.

Number 79 in Russia in 2026, of 420.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Compare with…

Suggestions: Kargasok region · 2026

Burnt area
15,565ha
GWIS perimeter (Copernicus)
Duration
12days
14 Jun 2026 – 25 Jun 2026
Municipalities hit
1
districts
Started on
14 Jun
2026
Heat detections
741
in a single hotspot: 148 MW
Danger at start
4
Very low · FWI index
Average daily power
641MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Jun25 Jun
25 Jun 2026

How it evolved, day by day

15 Jun 2026 · 13 MW · 2 16 Jun 2026 · 2,384 MW · 181 17 Jun 2026 · 822 MW · 157 18 Jun 2026 · 2,079 MW · 140 19 Jun 2026 · 361 MW · 50 20 Jun 2026 · 314 MW · 33 21 Jun 2026 · 402 MW · 74 22 Jun 2026 · 126 MW · 36 23 Jun 2026 · 64 MW · 24 24 Jun 2026 · 468 MW · 41 25 Jun 2026 · 20 MW · 3
16 Jun 21 Jun 24 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (32 passes) and with what wind. Watch the film

The weather it burned in

30°high
38km/h · peak gust
21%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 11.1 mm on 1 Jul.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 9.8% of the area of London (156 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Kargasok region where it started
    16,042 ha reached on 15 Jun
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Jun 24.9 °C 50 % 31 km/h 3.5 mm Very low 4
15 Jun 26.9 °C 26 % 25 km/h 0.0 mm Moderate 17
16 Jun 28.3 °C 22 % 38 km/h 0.0 mm High 32
17 Jun 22.3 °C 21 % 33 km/h 0.0 mm High 31
18 Jun 24.2 °C 25 % 23 km/h 0.0 mm High 26
19 Jun 26.2 °C 28 % 25 km/h 0.0 mm High 28
20 Jun 28.3 °C 24 % 23 km/h 0.0 mm High 28
21 Jun 30.1 °C 24 % 22 km/h 0.0 mm High 26
22 Jun 30.0 °C 29 % 19 km/h 0.0 mm High 25
23 Jun 30.4 °C 34 % 18 km/h 0.1 mm High 23
24 Jun 30.4 °C 30 % 26 km/h 0.0 mm High 32
25 Jun 30.4 °C 35 % 23 km/h 0.2 mm High 25
26 Jun after 30.7 °C 39 % 23 km/h 0.8 mm Moderate 20
27 Jun after 27.5 °C 33 % 31 km/h 0.2 mm Moderate 18
28 Jun after 26.2 °C 37 % 25 km/h 0.0 mm Moderate 18
29 Jun after 26.9 °C 40 % 25 km/h 0.5 mm Moderate 17
30 Jun after 28.7 °C 36 % 23 km/h 0.0 mm High 22
1 Jul after 22.2 °C 72 % 27 km/h 11.1 mm Very low 0

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Jun 2026
After · 2 Jul 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 19 June 2026 the air beside the fire reached 190 µg/m³ of PM2.5. That day averaged 126: 8.4 times the WHO daily guideline (15).

PM2.5 peak190 µg/m³
Days over the guideline11 days
PM10192 µg/m³
Optical depth1.24
12 Jun16 Jun20 Jun24 Jun28 Jun
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 741Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Kargasok region fire last?
GWIS (Copernicus) dates it between 14 June 2026 and 25 June 2026: 12 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 15,565 hectares (155.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Kargasok region (16,042 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 30.4 °C, humidity dropped to 21 % and gusts hit 38 km/h. The fire danger index (FWI) reached 32, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 741 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.