Skip to content
worldfires
PG · Papua New Guinea · –

Kandrian/Gloucester District fire, 8 September 2026 Kandrian/Gloucester District

Out · last detection 12 Oct 2026, 03:13 UTC

The fire started on 8 September 2026 in Kandrian/Gloucester District, Papua New Guinea, and satellites saw it burning for 35 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,570 hectares from heat detections, spread across a single municipality.

Number 134 in Papua New Guinea in 2026, of 198.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
2,570ha
GWIS perimeter (Copernicus)
Duration
35days
8 Sept 2026 – 12 Oct 2026
Municipalities hit
1
districts
Started on
8 Sept
2026
Heat detections
144
in a single hotspot: 86 MW
Danger at start
16
Moderate · FWI index
Average daily power
27MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 8 Sept12 Oct
12 Oct 2026

How it evolved, day by day

8 Sept 2026 · 7 MW · 1 10 Sept 2026 · 6 MW · 2 11 Sept 2026 · 3 MW · 4 12 Sept 2026 · 1 MW · 1 13 Sept 2026 · 9 MW · 1 14 Sept 2026 · 11 MW · 1 15 Sept 2026 · 12 MW · 5 17 Sept 2026 · 12 MW · 5 18 Sept 2026 · 59 MW · 6 19 Sept 2026 · 21 MW · 3 20 Sept 2026 · 40 MW · 4 21 Sept 2026 · 6 MW · 5 22 Sept 2026 · 5 MW · 4 23 Sept 2026 · 81 MW · 14 24 Sept 2026 · 198 MW · 12 25 Sept 2026 · 69 MW · 6 26 Sept 2026 · 2 MW · 2 27 Sept 2026 · 17 MW · 8 28 Sept 2026 · 65 MW · 16 29 Sept 2026 · 59 MW · 10 30 Sept 2026 · 25 MW · 4 1 Oct 2026 · 4 MW · 1 2 Oct 2026 · 1 MW · 1 3 Oct 2026 · 1 MW · 1 4 Oct 2026 · 9 MW · 1 5 Oct 2026 · 18 MW · 4 7 Oct 2026 · 3 MW · 2 8 Oct 2026 · 13 MW · 2 9 Oct 2026 · 2 MW · 2 10 Oct 2026 · 23 MW · 6 11 Oct 2026 · 45 MW · 5 12 Oct 2026 · 37 MW · 5
8 Sept 17 Sept 24 Sept 1 Oct 9 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

31°high
70km/h · peak gust
47%lowest humidity

It had gone 4 days without rain (1 mm or more) when it started. Rain came after the fire: 2.4 mm on 13 Oct.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.6% of the area of London (26 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Kandrian/Gloucester District where it started
    2,586 ha reached on 8 Sept
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
8 Sept 28.6 °C 65 % 51 km/h 0.2 mm Moderate 16
9 Sept 26.7 °C 60 % 59 km/h 0.2 mm Moderate 19
10 Sept 27.3 °C 59 % 67 km/h 0.0 mm High 22
11 Sept 26.4 °C 59 % 63 km/h 0.0 mm Moderate 21
12 Sept 26.8 °C 66 % 68 km/h 0.3 mm High 25
13 Sept 27.4 °C 61 % 68 km/h 0.0 mm High 27
14 Sept 27.6 °C 68 % 70 km/h 0.0 mm High 25
15 Sept 27.5 °C 66 % 66 km/h 0.3 mm High 26
16 Sept 28.3 °C 62 % 60 km/h 0.0 mm High 24
17 Sept 28.5 °C 61 % 60 km/h 0.0 mm High 24
18 Sept 27.7 °C 60 % 66 km/h 0.2 mm High 27
19 Sept 26.7 °C 67 % 67 km/h 0.4 mm High 28
20 Sept 28.3 °C 59 % 63 km/h 0.0 mm High 27
21 Sept 27.4 °C 60 % 64 km/h 0.0 mm High 26
22 Sept 28.4 °C 55 % 53 km/h 0.0 mm High 23
23 Sept 28.8 °C 56 % 52 km/h 0.0 mm High 24
24 Sept 28.3 °C 58 % 59 km/h 0.0 mm High 29
25 Sept 28.9 °C 59 % 61 km/h 0.0 mm High 30
26 Sept 30.4 °C 54 % 60 km/h 0.2 mm High 30
27 Sept 28.7 °C 59 % 61 km/h 0.0 mm High 31
28 Sept 29.0 °C 60 % 60 km/h 0.0 mm High 32
29 Sept 29.6 °C 57 % 58 km/h 0.0 mm High 32
30 Sept 28.6 °C 65 % 62 km/h 0.6 mm High 33
1 Oct 27.6 °C 68 % 69 km/h 1.7 mm High 24
2 Oct 27.9 °C 59 % 64 km/h 0.1 mm High 27
3 Oct 28.4 °C 55 % 58 km/h 0.0 mm High 31
4 Oct 29.5 °C 52 % 50 km/h 0.0 mm High 30
5 Oct 28.9 °C 57 % 47 km/h 0.0 mm High 27
6 Oct 30.4 °C 49 % 36 km/h 0.0 mm High 26
7 Oct 30.0 °C 53 % 30 km/h 0.1 mm High 22
8 Oct 30.7 °C 47 % 29 km/h 0.0 mm High 24
9 Oct 30.7 °C 54 % 40 km/h 0.2 mm High 23
10 Oct 29.6 °C 59 % 46 km/h 0.8 mm High 22
11 Oct 29.5 °C 53 % 50 km/h 0.0 mm High 29
12 Oct 29.4 °C 53 % 52 km/h 0.2 mm High 29
13 Oct after 28.9 °C 67 % 42 km/h 2.4 mm Moderate 14

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 1 Sept 2026
After · 19 Oct 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 7 October 2026 the air beside the fire reached 30 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak30 µg/m³
Days over the guideline0 days
PM1034 µg/m³
Optical depth0.67
6 Sept14 Sept22 Sept30 Sept8 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 144Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Papua New Guinea

Frequently asked questions

How long did the Kandrian/Gloucester District fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 8 September 2026 to 12 October 2026 (35 days). The perimeter dates it from 15 September 2026 to 5 October 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,570 hectares (25.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Kandrian/Gloucester District (2,586 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 30.7 °C, humidity dropped to 47 % and gusts hit 70 km/h. The fire danger index (FWI) reached 33, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Papua New Guinea (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 5 November 2026.
  1. Page published (2,570 ha).

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 15 September 2026 to 5 October 2026. 144 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.