Skip to content
worldfires
PG · Papua New Guinea · –

Kandrian/Gloucester District fire, 14 August 2026 Kandrian/Gloucester District

Out · last detection 24 Aug 2026, 03:32 UTC

The fire started on 14 August 2026 in Kandrian/Gloucester District, Papua New Guinea, and satellites saw it burning for 11 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,392 hectares from heat detections, spread across a single municipality.

Number 62 in Papua New Guinea in 2026, of 198.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

The power measured by the satellite is low (13.3 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
4,392ha
GWIS perimeter (Copernicus)
Duration
11days
14 Aug 2026 – 24 Aug 2026
Municipalities hit
1
districts
Started on
14 Aug
2026
Heat detections
109
in a single hotspot: 13 MW
Danger at start
16
Moderate · FWI index
Average daily power
43MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Aug24 Aug
24 Aug 2026

How it evolved, day by day

15 Aug 2026 · 6 MW · 2 16 Aug 2026 · 19 MW · 10 17 Aug 2026 · 81 MW · 21 18 Aug 2026 · 109 MW · 23 19 Aug 2026 · 99 MW · 16 20 Aug 2026 · 17 MW · 11 21 Aug 2026 · 22 MW · 10 22 Aug 2026 · 37 MW · 6 23 Aug 2026 · 33 MW · 8 24 Aug 2026 · 8 MW · 2
15 Aug 18 Aug 21 Aug 23 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

26°high
71km/h · peak gust
66%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 3.1 mm on 28 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 2.8% of the area of London (44 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Kandrian/Gloucester District where it started
    4,341 ha reached on 15 Aug
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.23 ha
Residents≈ 90

Inside the perimeter there were about 0.23 hectares of built-up land and about 90 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Aug 26.5 °C 69 % 56 km/h 0.0 mm Moderate 16
15 Aug 26.2 °C 70 % 69 km/h 0.0 mm High 23
16 Aug 25.3 °C 69 % 67 km/h 0.0 mm Moderate 21
17 Aug 25.6 °C 69 % 68 km/h 0.0 mm High 22
18 Aug 25.9 °C 68 % 64 km/h 0.0 mm High 21
19 Aug 25.8 °C 68 % 69 km/h 0.0 mm High 23
20 Aug 26.3 °C 66 % 67 km/h 0.1 mm High 24
21 Aug 25.2 °C 66 % 71 km/h 0.0 mm High 26
22 Aug 26.2 °C 68 % 63 km/h 0.0 mm High 24
23 Aug 26.3 °C 68 % 55 km/h 0.0 mm High 22
24 Aug 25.7 °C 68 % 60 km/h 0.0 mm High 23
25 Aug after 26.3 °C 74 % 54 km/h 0.9 mm Moderate 18
26 Aug after 26.4 °C 74 % 57 km/h 0.0 mm Moderate 18
27 Aug after 25.1 °C 82 % 55 km/h 0.4 mm Moderate 17
28 Aug after 24.8 °C 83 % 53 km/h 3.1 mm Low 10

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Aug 2026
After · 31 Aug 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 23 August 2026 the air beside the fire reached 18 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak18 µg/m³
Days over the guideline0 days
PM1024 µg/m³
Optical depth0.29
12 Aug16 Aug20 Aug24 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 109Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Papua New Guinea

Frequently asked questions

How long did the Kandrian/Gloucester District fire last?
GWIS (Copernicus) dates it between 14 August 2026 and 24 August 2026: 11 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,392 hectares (43.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Kandrian/Gloucester District (4,341 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 26.5 °C, humidity dropped to 66 % and gusts hit 71 km/h. The fire danger index (FWI) reached 26, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Papua New Guinea (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 5 November 2026.
  1. Page published (4,392 ha).

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 109 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.