Skip to content
worldfires
ZM · Zambia · –

Kalumbila fire, August 2021 Kalumbila

Out · last detection 2 Sept 2021, 00:20 UTC

The fire started on 26 August 2021 in Kalumbila, Zambia, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,058 hectares from heat detections, spread across a single municipality.

It is the 132th largest in North-Western since 2016 (of 133 with a page). Number 207 in Zambia in 2021, of 213.

Burnt area
3,058ha
GWIS perimeter (Copernicus)
Duration
8days
26 Aug 2021 – 2 Sept 2021
Municipalities hit
1
districts
Started on
26 Aug
2021
Heat detections
84
in a single hotspot: 59 MW
Danger at start
38
Very high · FWI index
Average daily power
111MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 26 Aug2 Sept
2 Sept 2021

How it evolved, day by day

26 Aug 2021 · 79 MW · 11 27 Aug 2021 · 10 MW · 2 28 Aug 2021 · 12 MW · 3 29 Aug 2021 · 302 MW · 17 30 Aug 2021 · 218 MW · 20 31 Aug 2021 · 47 MW · 16 1 Sept 2021 · 217 MW · 13 2 Sept 2021 · 1 MW · 2
26 Aug 29 Aug 1 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
46km/h · peak gust
14%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

78% of the perimeter overlaps earlier fires recorded since 2016: 311 ha in 2016, 1,993 ha in 2017, 617 ha in 2018, 312 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 2,387 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.9% of the area of London (31 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Kalumbila where it started
    3,082 ha reached on 26 Aug
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 91 % of the area in Zambia

Day High Min. humidity Peak gust Rain Danger (FWI)
26 Aug 31.7 °C 22 % 41 km/h 0.0 mm Very high 38
27 Aug 32.9 °C 21 % 35 km/h 0.0 mm High 38
28 Aug 33.8 °C 15 % 26 km/h 0.0 mm Very high 44
29 Aug 32.7 °C 20 % 35 km/h 0.0 mm Very high 45
30 Aug 32.3 °C 21 % 42 km/h 0.0 mm Very high 46
31 Aug 31.7 °C 15 % 36 km/h 0.0 mm Very high 46
1 Sept 32.1 °C 14 % 35 km/h 0.0 mm Very high 47
2 Sept 30.6 °C 21 % 46 km/h 0.0 mm Very high 48
3 Sept after 31.1 °C 24 % 37 km/h 0.0 mm Very high 42
4 Sept after 31.6 °C 22 % 37 km/h 0.0 mm Very high 43
5 Sept after 32.2 °C 20 % 35 km/h 0.0 mm Very high 42
6 Sept after 33.0 °C 21 % 34 km/h 0.0 mm Very high 43
7 Sept after 32.8 °C 17 % 32 km/h 0.0 mm Very high 42
8 Sept after 33.3 °C 15 % 35 km/h 0.0 mm Very high 47
9 Sept after 33.2 °C 18 % 40 km/h 0.0 mm Very high 49
10 Sept after 30.3 °C 23 % 52 km/h 0.0 mm Very high 49
11 Sept after 28.0 °C 24 % 52 km/h 0.0 mm Very high 48
12 Sept after 29.4 °C 23 % 38 km/h 0.0 mm Very high 42

Its twins: fires that started in the same weather

It started with an FWI of 38.1, a minimum humidity of 22% and more than two months without rain. Fires in the area that started in weather like this since 2016: 28.

FWI at the start 38.1
Minimum humidity 22 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Mufumbwe fire, August 2020
3,166 ha 14 days FWI 36.1 Min. humidity 22 % 62 km away, in 2020

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

11 days
median duration
3,904 ha
median area
11 %
went past 10,000 ha
2.4 mm
rain at the end (median; 3 of 28 had it)

It burned an area similar to its twins (3,058 ha against a median of 3,904 ha) and lasted 8 days, against 11 days.

In 25 of 28, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
46km/h · max. gust

It was considered over on 2 Sept, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 3 of 28, with a median of 2.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 19 Aug 2021
After · 9 Sept 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 84Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Zambia

Frequently asked questions

How long did the Kalumbila fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 26 August 2021 to 2 September 2021 (8 days). The perimeter dates it from 28 August 2021 to 1 September 2021.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,058 hectares (30.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Kalumbila (3,082 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 33.8 °C, humidity dropped to 14 % and gusts hit 46 km/h. The fire danger index (FWI) reached 48, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Zambia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 28. Their median duration was 11 days and their median area 3,904 ha; 11 % went past 10,000 ha. In 25 of 28, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 1 September 2021 → 2 September 2021.
  2. Start date: 28 August 2021 → 26 August 2021.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 28 August 2021 to 1 September 2021. 84 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.