Skip to content
worldfires
ID · Indonesia · →

Kaimana fire, 7 September 2026 Kaimana

Out · last detection 25 Oct 2026, 04:29 UTC

The fire started on 7 September 2026 in Kaimana, Indonesia, and satellites saw it burning for 49 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 23,627 hectares from heat detections, spread across a single municipality.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

It is the 4th largest in West Papua since 2016 (of 47 with a page). Number 51 in Indonesia in 2026, of 1025.

Compare with…
Burnt area
23,627ha
GWIS perimeter (Copernicus)
Duration
49days
7 Sept 2026 – 25 Oct 2026
Municipalities hit
1
regencies
Started on
7 Sept
2026
Heat detections
1,663
in a single hotspot: 132 MW
Danger at start
0
Very low · FWI index
Average daily power
310MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 7 Sept25 Oct
25 Oct 2026

How it evolved, day by day

7 Sept 2026 · 5 MW · 2 8 Sept 2026 · 24 MW · 2 10 Sept 2026 · 40 MW · 5 11 Sept 2026 · 8 MW · 5 12 Sept 2026 · 116 MW · 20 13 Sept 2026 · 3,626 MW · 227 14 Sept 2026 · 176 MW · 39 15 Sept 2026 · 12 MW · 9 16 Sept 2026 · 138 MW · 30 17 Sept 2026 · 74 MW · 22 18 Sept 2026 · 4 MW · 2 21 Sept 2026 · 425 MW · 63 23 Sept 2026 · 85 MW · 26 25 Sept 2026 · 123 MW · 24 26 Sept 2026 · 438 MW · 72 27 Sept 2026 · 16 MW · 10 28 Sept 2026 · 166 MW · 8 29 Sept 2026 · 26 MW · 14 30 Sept 2026 · 409 MW · 83 1 Oct 2026 · 695 MW · 81 2 Oct 2026 · 305 MW · 77 3 Oct 2026 · 308 MW · 67 4 Oct 2026 · 502 MW · 116 5 Oct 2026 · 590 MW · 94 6 Oct 2026 · 991 MW · 92 7 Oct 2026 · 705 MW · 84 8 Oct 2026 · 125 MW · 38 9 Oct 2026 · 714 MW · 119 10 Oct 2026 · 83 MW · 14 11 Oct 2026 · 874 MW · 156 12 Oct 2026 · 92 MW · 5 13 Oct 2026 · 18 MW · 10 14 Oct 2026 · 7 MW · 6 16 Oct 2026 · 26 MW · 6 17 Oct 2026 · 0 MW · 0 18 Oct 2026 · 7 MW · 4 19 Oct 2026 · 0 MW · 0 21 Oct 2026 · 64 MW · 14 22 Oct 2026 · 4 MW · 2 23 Oct 2026 · 50 MW · 14 24 Oct 2026 · 8 MW · 1 25 Oct 2026 · 0 MW · 0
7 Sept 13 Sept 14 Sept 23 Sept 30 Sept 6 Oct 12 Oct 19 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

31°high
44km/h · peak gust
45%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 9.8 mm on 26 Oct.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 15% of the area of London (236 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Kaimana where it started
    23,766 ha reached on 7 Sept
    1.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

Day High Min. humidity Peak gust Rain Danger (FWI)
7 Sept 29.6 °C 58 % 25 km/h 7.1 mm Very low 0
8 Sept 29.0 °C 65 % 23 km/h 8.8 mm Very low 0
9 Sept 28.5 °C 64 % 30 km/h 3.3 mm Very low 0
10 Sept 29.4 °C 45 % 34 km/h 0.0 mm Very low 1
11 Sept 29.1 °C 49 % 31 km/h 1.1 mm Very low 2
12 Sept 27.8 °C 50 % 33 km/h 0.2 mm Very low 4
13 Sept 27.8 °C 48 % 44 km/h 0.0 mm Low 6
14 Sept 28.5 °C 48 % 43 km/h 0.1 mm Low 6
15 Sept 29.1 °C 46 % 34 km/h 0.3 mm Low 8
16 Sept 29.2 °C 46 % 38 km/h 0.4 mm Low 8
17 Sept 29.9 °C 49 % 39 km/h 0.8 mm Low 7
18 Sept 28.0 °C 60 % 27 km/h 3.6 mm Very low 1
19 Sept 26.8 °C 68 % 20 km/h 6.2 mm Very low 0
20 Sept 27.6 °C 74 % 22 km/h 9.2 mm Very low 0
21 Sept 29.0 °C 57 % 30 km/h 2.2 mm Very low 0
22 Sept 29.4 °C 53 % 27 km/h 1.9 mm Very low 1
23 Sept 28.4 °C 84 % 18 km/h 8.4 mm Very low 0
24 Sept 28.2 °C 63 % 29 km/h 6.4 mm Very low 0
25 Sept 28.0 °C 75 % 28 km/h 3.3 mm Very low 0
26 Sept 28.6 °C 65 % 24 km/h 4.2 mm Very low 0
27 Sept 29.6 °C 55 % 19 km/h 4.6 mm Very low 0
28 Sept 28.5 °C 67 % 18 km/h 8.2 mm Very low 0
29 Sept 27.7 °C 64 % 23 km/h 2.7 mm Very low 0
30 Sept 28.9 °C 57 % 22 km/h 2.4 mm Very low 0
1 Oct 29.1 °C 53 % 30 km/h 1.3 mm Very low 1
2 Oct 29.6 °C 50 % 30 km/h 1.8 mm Very low 1
3 Oct 29.3 °C 46 % 23 km/h 0.7 mm Very low 3
4 Oct 29.3 °C 47 % 31 km/h 0.7 mm Very low 5
5 Oct 29.7 °C 49 % 26 km/h 2.4 mm Very low 1
6 Oct 29.1 °C 46 % 31 km/h 0.1 mm Very low 5
7 Oct 29.3 °C 58 % 22 km/h 5.0 mm Very low 0
8 Oct 29.1 °C 59 % 19 km/h 2.4 mm Very low 0
9 Oct 30.3 °C 46 % 21 km/h 2.0 mm Very low 1
10 Oct 30.2 °C 45 % 23 km/h 0.4 mm Very low 4
11 Oct 29.1 °C 64 % 21 km/h 4.7 mm Very low 0
12 Oct 28.1 °C 76 % 22 km/h 13.3 mm Very low 0
13 Oct 28.5 °C 86 % 22 km/h 28.6 mm Very low 0
14 Oct 27.4 °C 74 % 24 km/h 6.8 mm Very low 0
15 Oct 28.2 °C 75 % 18 km/h 10.0 mm Very low 0
16 Oct 28.2 °C 69 % 20 km/h 8.6 mm Very low 0
17 Oct 29.6 °C 63 % 22 km/h 4.5 mm Very low 0
18 Oct 30.1 °C 49 % 29 km/h 0.4 mm Very low 1
19 Oct 30.1 °C 49 % 30 km/h 1.7 mm Very low 1
20 Oct 26.8 °C 70 % 22 km/h 8.5 mm Very low 0
21 Oct 28.2 °C 68 % 28 km/h 10.1 mm Very low 0
22 Oct 28.3 °C 70 % 23 km/h 5.9 mm Very low 0
23 Oct 28.3 °C 64 % 23 km/h 7.4 mm Very low 0
24 Oct 30.6 °C 63 % 26 km/h 6.3 mm Very low 0
25 Oct 28.1 °C 67 % 22 km/h 7.8 mm Very low 0
26 Oct after 29.6 °C 79 % 19 km/h 9.8 mm Very low 0

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 31 Aug 2026
After · 1 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 14 September 2026 the air beside the fire reached 321 µg/m³ of PM2.5. That day averaged 226: 15 times the WHO daily guideline (15).

PM2.5 peak321 µg/m³
Days over the guideline24 days
PM10326 µg/m³
Optical depth4.22
5678910111213141516171819202122232425262728293012
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,663Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Indonesia ›

Frequently asked questions

How long did the Kaimana fire last?
GWIS (Copernicus) dates it between 7 September 2026 and 25 October 2026: 49 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 23,627 hectares (236.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Kaimana (23,766 ha, 1.5 %).
Is the Kaimana fire still active?
No fire detections since 25 Oct 2026, 04:29 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 30.6 °C, humidity dropped to 45 % and gusts hit 44 km/h. The fire danger index (FWI) reached 8, class Low.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Indonesia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings ›

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 24 October 2026 → 25 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 1,663 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.