Skip to content
worldfires
PY · Paraguay · –

José Falcón fire, 22 September 2020 Benjamín Aceval, José Falcón

Out · last detection 13 Oct 2020, 05:03 UTC

The fire started on 22 September 2020 in José Falcón, Paraguay, and satellites saw it burning for 21 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 33,737 hectares from heat detections, spread across 2 municipalities.

It is the 9th largest in PRESIDENTE HAYES since 2016 (of 709 with a page). Number 6 in Paraguay in 2020, of 422.

Burnt area
33,737ha
GWIS perimeter (Copernicus)
Duration
21days
22 Sept 2020 – 12 Oct 2020
Municipalities hit
2
districts
Started on
22 Sept
2020
Heat detections
1,577
in a single hotspot: 405 MW
Danger at start
21
Moderate · FWI index
Average daily power
1.5GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 22 Sept12 Oct
13 Oct 2020

How it evolved, day by day

22 Sept 2020 · 79 MW · 12 23 Sept 2020 · 47 MW · 11 24 Sept 2020 · 48 MW · 13 25 Sept 2020 · 114 MW · 3 26 Sept 2020 · 515 MW · 29 27 Sept 2020 · 14 MW · 5 28 Sept 2020 · 19 MW · 3 29 Sept 2020 · 55 MW · 8 30 Sept 2020 · 831 MW · 42 1 Oct 2020 · 21,260 MW · 558 2 Oct 2020 · 5,590 MW · 466 3 Oct 2020 · 2,216 MW · 319 4 Oct 2020 · 171 MW · 24 5 Oct 2020 · 66 MW · 18 6 Oct 2020 · 63 MW · 5 7 Oct 2020 · 142 MW · 19 8 Oct 2020 · 174 MW · 7 10 Oct 2020 · 92 MW · 10 11 Oct 2020 · 186 MW · 8 12 Oct 2020 · 35 MW · 13 13 Oct 2020 · 7 MW · 4
22 Sept 27 Sept 1 Oct 7 Oct 13 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

43°high
66km/h · peak gust
16%lowest humidity

It had gone 4 days without rain (1 mm or more) when it started. Rain came after the fire: 14.9 mm on 14 Oct.

This area had burned before

22% of the perimeter overlaps earlier fires recorded since 2016: 2,622 ha in 2016, 4,848 ha in 2017, 1,076 ha in 2018, 1,338 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 7,371 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 21% of the area of London (337 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 24,201 ha reached on 22 Sept
    2.2 %
  2. José Falcón where it started
    9,420 ha reached on 22 Sept
    5.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area2.1 ha
Residents≈ 150

Inside the perimeter there were about 2.1 hectares of built-up land and about 150 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
22 Sept 29.8 °C 22 % 27 km/h 0.0 mm Moderate 21
23 Sept 33.1 °C 33 % 38 km/h 0.0 mm High 29
24 Sept 36.1 °C 26 % 38 km/h 0.0 mm High 31
25 Sept 39.6 °C 20 % 49 km/h 0.0 mm Extreme 52
26 Sept 41.1 °C 21 % 66 km/h 0.0 mm Very extreme 77
27 Sept 33.9 °C 38 % 60 km/h 4.8 mm Very high 40
28 Sept 26.7 °C 31 % 39 km/h 1.1 mm Very low 5
29 Sept 36.8 °C 32 % 38 km/h 0.0 mm High 22
30 Sept 40.8 °C 25 % 60 km/h 0.0 mm Extreme 55
1 Oct 42.6 °C 19 % 66 km/h 0.0 mm Very extreme 75
2 Oct 39.8 °C 24 % 52 km/h 0.0 mm Extreme 52
3 Oct 27.0 °C 49 % 52 km/h 0.0 mm Very high 41
4 Oct 28.3 °C 43 % 36 km/h 0.0 mm High 22
5 Oct 26.6 °C 42 % 40 km/h 0.0 mm High 27
6 Oct 31.0 °C 37 % 30 km/h 0.0 mm High 22
7 Oct 36.7 °C 30 % 30 km/h 0.0 mm High 31
8 Oct 37.2 °C 32 % 42 km/h 0.0 mm High 32
9 Oct 29.0 °C 38 % 50 km/h 1.3 mm High 34
10 Oct 33.1 °C 16 % 37 km/h 0.0 mm Very high 43
11 Oct 36.1 °C 17 % 33 km/h 0.0 mm Very high 40
12 Oct 37.5 °C 18 % 41 km/h 0.0 mm Very high 42
13 Oct after 33.7 °C 32 % 37 km/h 0.6 mm High 37
14 Oct after 35.2 °C 42 % 50 km/h 14.9 mm High 34

Its twins: fires that started in the same weather

It started with an FWI of 20.8, a minimum humidity of 22% and 4 days without rain. Fires in the area that started in weather like this since 2016: 32.

FWI at the start 20.8
Minimum humidity 22 %
Days without rain 4
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Benjamín Aceval fire, March 2020
2,992 ha 9 days FWI 20.6 Min. humidity 23 % 50 km away, in 2020

First rain (1 mm or more) after it ended: 2.1 mm on 18 Mar.

What happened to them

6 days
median duration
2,451 ha
median area
100 %
went past 1,000 ha
4.2 mm
rain at the end (median; 32 of 32 had it)

It was 13.8 times larger than the median of its twins and lasted 21 days, against 6 days.

None of its 32 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 4.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

14.9 mmfirst rain
14 Oct2 days after it ended
66km/h · max. gust

It was considered over on 12 Oct, and on 14 Oct 14.9 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 32 of 32, with a median of 4.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 15 Sept 2020
After · 19 Oct 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,577Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Paraguay

Frequently asked questions

How long did the José Falcón fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 22 September 2020 to 12 October 2020 (21 days). The perimeter dates it from 26 September 2020 to 10 October 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 33,737 hectares (337.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Benjamín Aceval (24,201 ha, 2.2 %); José Falcón (9,420 ha, 5.1 %).
What was the weather like?
During the fire the temperature reached 42.6 °C, humidity dropped to 16 % and gusts hit 66 km/h. The fire danger index (FWI) reached 77, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Paraguay (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 32. Their median duration was 6 days and their median area 2,451 ha; 100 % went past 1,000 ha. None of its 32 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 4.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 132 · 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 10 October 2020 → 12 October 2020.
  2. Start date: 26 September 2020 → 22 September 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 132 · 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 26 September 2020 to 10 October 2020. 1,577 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.