Jore fire, 16 April 2026 Jore
The fire started on 16 April 2026 in Jore, Ethiopia, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,784 hectares from heat detections, spread across a single municipality.
It is the 354th largest in Gambela since 2016 (of 611 with a page). Number 101 in Ethiopia in 2026, of 190.
The power measured by the satellite is low (25.4 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.
Compare with…
Suggestions: Jore · 2019Jore · 2018Jore · 2016Jore · 2020
- Burnt area
- 2,784ha
- GWIS perimeter (Copernicus)
- Duration
- 8days
- 16 Apr 2026 – 23 Apr 2026
- Municipalities hit
- 1
- districts
- Started on
- 16 Apr
- 2026
- Heat detections
- 54
- in a single hotspot: 25 MW
- Danger at start
- 37
- High · FWI index
- Average daily power
- 75MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 5 days without rain (1 mm or more) when it started. Rain came after the fire: 5.0 mm on 24 Apr.
This area had burned before
100% of the perimeter overlaps earlier fires recorded since 2016: 2,249 ha in 2016, 845 ha in 2017, 2,248 ha in 2018, 2,723 ha in 2019, 921 ha in 2020, 1,221 ha in 2021, 45 ha in 2022, 113 ha in 2023, 123 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 2,802 ha that had burned before.
- 2,723 ha Jore fire, February 2019 16,368 ha in total; the hectares shown are those it shares with this fire
- 2,248 ha Jore fire, March 2018 8,698 ha in total; the hectares shown are those it shares with this fire
- 1,377 ha Jore fire, January 2016 7,547 ha in total; the hectares shown are those it shares with this fire
- 921 ha Jore fire, April 2020 2,211 ha in total; the hectares shown are those it shares with this fire
- 643 ha Pochalla fire, January 2017 10,025 ha in total; the hectares shown are those it shares with this fire
- 560 ha Jore fire, February 2021 8,132 ha in total; the hectares shown are those it shares with this fire
- 539 ha Jore fire, December 2016 2,751 ha in total; the hectares shown are those it shares with this fire
- 332 ha Jore fire, March 2016 2,294 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Jore where it started2,801 ha reached on 16 Apr0.8 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2025Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 16 Apr | 37.7 °C | 28 % | 40 km/h | 0.1 mm | High 37 |
| 17 Apr | 37.8 °C | 27 % | 39 km/h | 1.5 mm | High 29 |
| 18 Apr | 38.8 °C | 27 % | 38 km/h | 1.6 mm | High 29 |
| 19 Apr | 39.4 °C | 25 % | 41 km/h | 0.0 mm | High 38 |
| 20 Apr | 36.2 °C | 30 % | 35 km/h | 0.0 mm | High 34 |
| 21 Apr | 37.6 °C | 28 % | 33 km/h | 0.0 mm | High 35 |
| 22 Apr | 37.7 °C | 28 % | 34 km/h | 0.0 mm | High 37 |
| 23 Apr | 37.9 °C | 27 % | 41 km/h | 0.0 mm | Very high 43 |
| 24 Apr after | 34.3 °C | 40 % | 32 km/h | 5.0 mm | Low 9 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 20 April 2026 the air beside the fire reached 35 µg/m³ of PM2.5. That day averaged 23: 1.5 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 54Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 23,559 haJore4 January 2019 · 21 days · 23 km away
- 201,499 haJoreJanuary 2022 · 78 days · 25 km away
- 76,225 haJoreFebruary 2026 · 35 days · 30 km away
- 21,905 haPochalla27 December 2016 · 16 days · 32 km away
- 64,789 haJore21 December 2016 · 42 days · 37 km away
- 30,249 haJore27 December 2016 · 23 days · 38 km away
Frequently asked questions
- How long did the Jore fire last?
- GWIS (Copernicus) dates it between 16 April 2026 and 23 April 2026: 8 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,784 hectares (27.8 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Jore (2,801 ha, 0.8 %).
- What was the weather like?
- During the fire the temperature reached 39.4 °C, humidity dropped to 25 % and gusts hit 41 km/h. The fire danger index (FWI) reached 43, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Ethiopia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 54 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.