Skip to content
worldfires
EC · Ecuador · –

Jipijapa fire, 2 December 2025 Jipijapa, Santa Elena, Paján

Out · last detection 18 Dec 2025, 18:07 UTC

The fire started on 2 December 2025 in Jipijapa, Ecuador, and satellites saw it burning for 17 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,296 hectares from heat detections, spread across 3 municipalities.

Number 7 in Ecuador in 2025, of 36.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
2,296ha
GWIS perimeter (Copernicus)
Duration
17days
2 Dec 2025 – 18 Dec 2025
Municipalities hit
3
cantons
Started on
2 Dec
2025
Heat detections
34
in a single hotspot: 65 MW
Danger at start
10
Low · FWI index
Average daily power
49MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 2 Dec18 Dec
18 Dec 2025

How it evolved, day by day

2 Dec 2025 · 44 MW · 2 8 Dec 2025 · 28 MW · 5 10 Dec 2025 · 108 MW · 9 11 Dec 2025 · 79 MW · 6 12 Dec 2025 · 83 MW · 7 13 Dec 2025 · 31 MW · 3 15 Dec 2025 · 8 MW · 1 18 Dec 2025 · 9 MW · 1
2 Dec 10 Dec 12 Dec 15 Dec

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

29°high
39km/h · peak gust
38%lowest humidity

It had gone 15 days without rain (1 mm or more) when it started. Rain came after the fire: 3.3 mm on 25 Dec.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.5% of the area of London (23 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Jipijapa where it started
    1,877 ha reached on 2 Dec
    1.3 %
  2. 400 ha reached on 10 Dec
    0.1 %
  3. 34 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area1.3 ha
Residents≈ 200

Inside the perimeter there were about 1.3 hectares of built-up land and about 200 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
2 Dec 27.6 °C 47 % 21 km/h 0.0 mm Low 10
3 Dec 27.1 °C 52 % 28 km/h 0.2 mm Moderate 12
4 Dec 25.6 °C 55 % 30 km/h 0.2 mm Moderate 12
5 Dec 27.4 °C 43 % 29 km/h 0.0 mm Moderate 14
6 Dec 28.8 °C 41 % 28 km/h 0.0 mm Moderate 16
7 Dec 27.6 °C 45 % 32 km/h 0.0 mm Moderate 16
8 Dec 28.8 °C 39 % 31 km/h 0.0 mm Moderate 16
9 Dec 26.9 °C 44 % 35 km/h 0.0 mm Moderate 17
10 Dec 28.0 °C 39 % 34 km/h 0.0 mm Moderate 16
11 Dec 27.1 °C 45 % 39 km/h 0.0 mm Moderate 19
12 Dec 28.4 °C 41 % 32 km/h 0.0 mm Moderate 21
13 Dec 29.1 °C 38 % 34 km/h 0.0 mm Moderate 19
14 Dec 27.5 °C 46 % 34 km/h 0.0 mm Moderate 20
15 Dec 26.7 °C 46 % 32 km/h 0.0 mm Moderate 18
16 Dec 28.9 °C 39 % 24 km/h 0.0 mm Moderate 17
17 Dec 26.6 °C 50 % 24 km/h 0.0 mm Moderate 19
18 Dec 27.4 °C 44 % 24 km/h 0.0 mm Moderate 20
19 Dec after 28.2 °C 46 % 28 km/h 0.4 mm Moderate 18
20 Dec after 29.5 °C 43 % 36 km/h 0.0 mm Moderate 17
21 Dec after 27.3 °C 49 % 33 km/h 0.0 mm High 21
22 Dec after 28.3 °C 47 % 31 km/h 0.0 mm Moderate 20
23 Dec after 28.3 °C 48 % 26 km/h 0.0 mm Moderate 20
24 Dec after 27.2 °C 54 % 28 km/h 0.8 mm Moderate 20
25 Dec after 27.6 °C 52 % 32 km/h 3.3 mm Moderate 15

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 25 Nov 2025
After · 25 Dec 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 13 December 2025 the air beside the fire reached 23 µg/m³ of PM2.5. That day averaged 16: 1.1 times the WHO daily guideline (15).

PM2.5 peak23 µg/m³
Days over the guideline3 days
PM1029 µg/m³
Optical depth0.72
30 Nov4 Dec8 Dec12 Dec16 Dec
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 34Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Ecuador

Frequently asked questions

How long did the Jipijapa fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 2 December 2025 to 18 December 2025 (17 days). The perimeter dates it from 8 December 2025 to 13 December 2025.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,296 hectares (23.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Jipijapa (1,877 ha, 1.3 %); Santa Elena (400 ha, 0.1 %); Paján (34 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 29.1 °C, humidity dropped to 38 % and gusts hit 39 km/h. The fire danger index (FWI) reached 21, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Ecuador (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 13 December 2025 → 18 December 2025.
  2. Start date: 8 December 2025 → 2 December 2025.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 8 December 2025 to 13 December 2025. 34 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.