Skip to content
worldfires
BO · Bolivia · –

Ixiamas fire, 19 September 2023 Ixiamas

Out · last detection 29 Sept 2023, 18:06 UTC

The fire started on 19 September 2023 in Ixiamas, Bolivia, and satellites saw it burning for 11 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 16,472 hectares from heat detections, spread across a single municipality.

It is the 14th largest in La Paz since 2016 (of 106 with a page). Number 25 in Bolivia in 2023, of 248.

Burnt area
16,472ha
GWIS perimeter (Copernicus)
Duration
11days
19 Sept 2023 – 29 Sept 2023
Municipalities hit
1
municipalities
Started on
19 Sept
2023
Heat detections
647
in a single hotspot: 343 MW
Danger at start
1
Very low · FWI index
Average daily power
770MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 19 Sept29 Sept
29 Sept 2023

How it evolved, day by day

19 Sept 2023 · 1,405 MW · 38 20 Sept 2023 · 18 MW · 2 21 Sept 2023 · 717 MW · 96 22 Sept 2023 · 543 MW · 67 23 Sept 2023 · 1,419 MW · 108 24 Sept 2023 · 1,105 MW · 103 25 Sept 2023 · 940 MW · 94 26 Sept 2023 · 1,376 MW · 97 27 Sept 2023 · 136 MW · 36 29 Sept 2023 · 38 MW · 6
19 Sept 21 Sept 23 Sept 25 Sept 27 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
53km/h · peak gust
29%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 3.8 mm on 1 Oct.

This area had burned before

74% of the perimeter overlaps earlier fires recorded since 2016: 10,488 ha in 2020, 2,594 ha in 2022. Part of it burned more than once, so the yearly figures add up to more than the 12,191 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 10% of the area of London (165 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Ixiamas 11,828 inhabitants where it started
    16,581 ha reached on 19 Sept
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
19 Sept 33.6 °C 54 % 38 km/h 8.4 mm Very low 1
20 Sept 35.7 °C 40 % 29 km/h 0.0 mm Low 8
21 Sept 37.4 °C 40 % 30 km/h 0.1 mm Moderate 13
22 Sept 38.4 °C 38 % 33 km/h 0.3 mm Moderate 16
23 Sept 39.8 °C 31 % 29 km/h 0.3 mm Moderate 19
24 Sept 40.2 °C 29 % 33 km/h 0.1 mm Moderate 21
25 Sept 38.7 °C 38 % 42 km/h 0.2 mm High 24
26 Sept 38.1 °C 40 % 53 km/h 0.1 mm High 26
27 Sept 38.7 °C 35 % 40 km/h 2.6 mm Moderate 14
28 Sept 32.1 °C 45 % 32 km/h 4.4 mm Very low 4
29 Sept 37.5 °C 32 % 31 km/h 0.2 mm Moderate 17
30 Sept after 36.3 °C 36 % 37 km/h 0.7 mm Moderate 17
1 Oct after 32.4 °C 50 % 28 km/h 3.8 mm Very low 3

Its twins: fires that started in the same weather

It started with an FWI of 1.4, a minimum humidity of 54% and rain the day before. Fires in the area that started in weather like this since 2016: 23.

FWI at the start 1.4
Minimum humidity 54 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Ixiamas fire, September 2017
14,211 ha 11 days FWI 1.3 Min. humidity 53 % 91 km away, in 2017

First rain (1 mm or more) after it ended: 24.6 mm on 27 Sept.

What happened to them

10 days
median duration
7,429 ha
median area
39 %
went past 10,000 ha
14.8 mm
rain at the end (median; 23 of 23 had it)

It was 2.2 times larger than the median of its twins and lasted 11 days, against 10 days.

Only 3 of its 23 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 14.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

3.8 mmfirst rain
1 Oct2 days after it ended
53km/h · max. gust

It was considered over on 29 Sept, and on 1 Oct 3.8 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 23 of 23, with a median of 14.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 12 Sept 2023
After · 6 Oct 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 30 September 2023 the air beside the fire reached 150 µg/m³ of PM2.5. That day averaged 84: 5.6 times the WHO daily guideline (15).

PM2.5 peak150 µg/m³
Days over the guideline12 days
PM10214 µg/m³
Optical depth2.65
17 Sept20 Sept23 Sept26 Sept29 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 647Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the Ixiamas fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 19 September 2023 to 29 September 2023 (11 days). The perimeter dates it from 19 September 2023 to 27 September 2023.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 16,472 hectares (164.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Ixiamas (16,581 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 40.2 °C, humidity dropped to 29 % and gusts hit 53 km/h. The fire danger index (FWI) reached 26, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 23. Their median duration was 10 days and their median area 7,429 ha; 39 % went past 10,000 ha. Only 3 of its 23 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 14.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 19 September 2023 to 27 September 2023. 647 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.