Skip to content
worldfires
AR · Argentina · –

Ituzaingó fire, 19 September 2020 Ituzaingó, San Miguel

Out · last detection 22 Sept 2020, 17:23 UTC

The fire started on 19 September 2020 in Ituzaingó, Argentina, and satellites saw it burning for 4 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,075 hectares from heat detections, spread across 2 municipalities.

It is the 127th largest in Corrientes since 2016 (of 198 with a page). Number 383 in Argentina in 2020, of 669.

Burnt area
2,075ha
GWIS perimeter (Copernicus)
Duration
4days
19 Sept 2020 – 22 Sept 2020
Municipalities hit
2
departments
Started on
19 Sept
2020
Heat detections
97
in a single hotspot: 49 MW
Danger at start
11
Low · FWI index
Average daily power
185MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 19 Sept22 Sept
22 Sept 2020

How it evolved, day by day

19 Sept 2020 · 13 MW · 2 20 Sept 2020 · 640 MW · 76 21 Sept 2020 · 84 MW · 16 22 Sept 2020 · 4 MW · 3
19 Sept 20 Sept 21 Sept 22 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

26°high
57km/h · peak gust
30%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started. Rain came after the fire: 4.3 mm on 27 Sept.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.3% of the area of London (21 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Ituzaingó where it started
    1,859 ha reached on 19 Sept
    0.2 %
  2. 217 ha reached on 20 Sept
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.66 ha
Residents≈ 30

Inside the perimeter there were about 0.66 hectares of built-up land and about 30 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 26 % of the area in Argentina

Day High Min. humidity Peak gust Rain Danger (FWI)
19 Sept 25.6 °C 33 % 57 km/h 0.0 mm Low 11
20 Sept 20.0 °C 38 % 44 km/h 0.0 mm Moderate 12
21 Sept 21.9 °C 30 % 42 km/h 0.0 mm Moderate 18
22 Sept 25.6 °C 38 % 31 km/h 0.0 mm Moderate 11
23 Sept after 31.2 °C 39 % 37 km/h 0.0 mm Moderate 17
24 Sept after 32.1 °C 40 % 34 km/h 0.0 mm Moderate 16
25 Sept after 35.2 °C 37 % 35 km/h 0.0 mm Moderate 21
26 Sept after 37.0 °C 33 % 47 km/h 0.0 mm High 31
27 Sept after 30.7 °C 42 % 60 km/h 4.3 mm Low 7

Its twins: fires that started in the same weather

It started with an FWI of 10.6, a minimum humidity of 33% and 2 days without rain. Fires in the area that started in weather like this since 2016: 21.

FWI at the start 10.6
Minimum humidity 33 %
Days without rain 2
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Ituzaingó fire, November 2020
9,387 ha 6 days FWI 11.6 Min. humidity 34 % 58 km away, in 2020

First rain (1 mm or more) after it ended: 31.7 mm on 26 Nov.

What happened to them

8 days
median duration
2,338 ha
median area
100 %
went past 1,000 ha
5.3 mm
rain at the end (median; 21 of 21 had it)

It burned an area similar to its twins (2,075 ha against a median of 2,338 ha) and lasted 4 days, against 8 days.

All of them had rain in the ten days after the end: the first rainy day brought a median of 5.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

4.3 mmfirst rain
27 Sept5 days after it ended
57km/h · max. gust

It was considered over on 22 Sept, and on 27 Sept 4.3 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 21 of 21, with a median of 5.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 12 Sept 2020
After · 29 Sept 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 97Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Argentina

Frequently asked questions

How long did the Ituzaingó fire last?
GWIS (Copernicus) dates it between 19 September 2020 and 22 September 2020: 4 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,075 hectares (20.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Ituzaingó (1,859 ha, 0.2 %); San Miguel (217 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 25.6 °C, humidity dropped to 30 % and gusts hit 57 km/h. The fire danger index (FWI) reached 18, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Argentina (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 21. Their median duration was 8 days and their median area 2,338 ha; 100 % went past 1,000 ha. All of them had rain in the ten days after the end: the first rainy day brought a median of 5.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · 100 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911 · 100.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 97 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.