Skip to content
worldfires
IT · Italy ·

Irsina fire, July 2025 Irsina, Gravina in Puglia

Out · last detection 3 Jul 2025, 12:20 UTC

The fire started on 3 July 2025 in Irsina, Italy, and satellites saw it burning for 1 day. Copernicus mapped a burnt perimeter of 571 hectares from satellite imagery, spread across 2 municipalities.

It is the 2th largest in Matera since 2016 (of 30 with a page). Number 18 in Italy in 2025, of 216.

Burnt area
571ha
Copernicus perimeter
Duration
1day
3 Jul 2025 – 3 Jul 2025
Municipalities hit
2
municipalities
Started on
3 Jul
2025
Heat detections
32
in a single hotspot: 36 MW
Danger at start
45
Very high · FWI index
Average daily power
511MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 3 Jul3 Jul

How it evolved, day by day

3 Jul 2025 · 511 MW · 32

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
35km/h · peak gust
23%lowest humidity

It had gone 14 days without rain (1 mm or more) when it started. Rain came after the fire: 1.7 mm on 5 Jul.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.4% of the area of London (5.7 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Irsina 4,449 inhabitants · 5.1 km from the centre where it started
    547 ha reached on 3 Jul
    2.1 %
  2. Gravina in Puglia 42,703 inhabitants · 15.8 km from the centre
    25 ha reached on 3 Jul
    0.1 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Agricultural areas95 %
  • Scrub and transitional woodland4.7 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
3 Jul 35.9 °C 23 % 35 km/h 0.1 mm Very high 45
4 Jul after 36.7 °C 21 % 32 km/h 0.0 mm Very high 48
5 Jul after 36.5 °C 26 % 26 km/h 1.7 mm Very high 43

Its twins: fires that started in the same weather

It started with an FWI of 44.8, a minimum humidity of 23% and 14 days without rain. Fires in the area that started in weather like this since 2016: 23.

FWI at the start 44.8
Minimum humidity 23 %
Days without rain 14
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Minervino Murge fire, July 2026
123 ha 6 days FWI 43.5 Min. humidity 24 % 34 km away, in 2026

First rain (1 mm or more) after it ended: 1.9 mm on 21 Jul.

What happened to them

3 days
median duration
238 ha
median area
0 %
went past 1,000 ha
2.3 mm
rain at the end (median; 19 of 23 had it)

It was 2.4 times larger than the median of its twins and lasted 1 day, against 3 days.

Only 2 of its 23 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 4 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.7 mmfirst rain
5 Jul2 days after it ended
35km/h · max. gust

It was considered over on 3 Jul, and on 5 Jul 1.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 19 of 23, with a median of 2.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 26 Jun 2025
After · 10 Jul 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 5 July 2025 the air beside the fire reached 12 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak12 µg/m³
Days over the guideline0 days
PM1015 µg/m³
Optical depth0.31
1 Jul3 Jul5 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 32Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Italy

Frequently asked questions

How long did the Irsina fire last?
Copernicus dates it between 3 July 2025 and 3 July 2025: 1 day between the first and last image with fire.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 571 hectares (5.7 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Irsina (547 ha, 2.1 %); Gravina in Puglia (25 ha, 0.1 %).
Did the fire reach a town?
The fire started in Irsina and came within 5.1 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 35.9 °C, humidity dropped to 23 % and gusts hit 35 km/h. The fire danger index (FWI) reached 45, class Very high.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Italy (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 23. Their median duration was 3 days and their median area 238 ha; 0 % went past 1,000 ha. Only 2 of its 23 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 4 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · 1515 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112 · 1515.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 32 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM4 (Creative Commons Attribution 3.0 License). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.